• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.1
• /
• pp.24-30
• /
• 2007

According to development of wireless communication technologies, we need not only high data rate but low data rate system of low power consumption. This low data rate system is utilized in the field of home automation, health care, sensoring and monitoring, etc. IEEE 802.15.4 LR-WPAN system is the best choice for realizing ubiquitous networking system. In this paper SoC Architecture for IEEE 802.15.4 Low Rate WPAN is designed. IEEE 802.15.4 Low Rate WPAN system serves the functions and realization of home area network. We propose the SoC architecture for 868/915MHz frequency band of IEEE 802.15.4 Low Rate WPAN system. The key issue is to design SoC architecture which provides the function of Low Rate WPAN system to meet the requirement of IEEE 802.15.4 standards.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1373-1375
• /
• 1999

High impedance fault (HIF) is defined as fault the general overcurrent relay can not detect or interrupt. Especially when HIF occur in residential areas, energized high voltage conductor results in fire hazard, equiment damage or personal threat. This paper proposes the model of HIF in transmission line using the ZnO arrester and resistance to be implemented within EMTP. Wavelet transform is efficient and useful for the detection of HIF in power system, because it uses variable windows according to frequency. HIF detection method using wavelet transform can distinguish HIF from similar phenomena like arcfurance load, capacitor bank switching and line switching.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03b
• /
• pp.25-25
• /
• 2010

This paper describes the design and fabrication of a Risk Voltage Meter (RVM) which can analyze the step and touch voltages in grounding systems. The meter consists of a sine-wave power source which generates up to 300 [$V_{rms}$] in ranges of 45 [Hz]~1 [kHz], a 8 Ch. data acquisition module, and a personal computer. Also, a noise elimination method by a digital band-pass filter during measurement is proposed.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.4
• /
• pp.215-223
• /
• 2018

Recently, as interest of wearable devices has increased, commercially available smart wristbands and applications have been used as a tool for personal healthy management. However most previous studies have focused on evaluating the accuracy and reliability of the technical problems of wearable devices, especially step counts, walking distance, and energy consumption measured from the smart wristbands. In this study, we propose a physical activity evaluation model using classification rules, induced from the associative classification mining approach. These rules associated with five physical activities were generated by considering activities and walking times in target heart rate zones such as 'Out-of Zone', 'Fat Burn Zone', 'Cardio Zone', and 'Peak Zone'. In the experiment, we evaluated the prediction power of classification rules and verified its effectiveness by comparing classification accuracies between the proposed model and support vector machine.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.103.6-103
• /
• 2001

Glaucoma is an eye disease which is caused by abnormal high IOP (Intra Ocular Pressure) in the eye. High IOP is caused by the aqueous humor which is produced consistently but not drained due to the malfunction of the trabecular system which has a role of draining the aqueous humor into the venous system. Currently, there are some methods to treat glaucoma, Among these, the use of implants is increasing in these days due to many problems in other methods. However, conventional implants are passive implants and have critical disadvantage. Therefore, it is needed to develop a new implant using MEMS structure which is capable of controlling the IOP actively and copes with personal difference of patients. An active glaucoma implant consists of the valve actuator, pressure sensor, controller, and power supply. In this paper the valve actuator is considered. We make experiments and simulations with the fabricated ...

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.78.3-78
• /
• 2002

In this paper, we present a five-DOF actuator based on dielectric elastomer. The actuator is designed for generating five DOFs motions to drive a micro camera steering module and provides all the functions for controlling CCD array such as focusing, pan and tilting. Basic modeling of the actuator is performed, and simulation works and experimental verifications are conducted, too. The camera steering module includes most parts necessary for driving the actuator such as a micro-controller and DC-DC converter, etc. It can be operated with a personal computer using only communication lines without external power supply. A prototype is developed and its performance is experimentally proved. $\textbullet$ artificial muscle, EAP, actuator.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.729-732
• /
• 2002

This paper reports an experimental study around a module about forced air flow by blower($35{\times}35{\times}6mm^3$) in portable PC(10mm high, 200mm wide, and 235mm long). The channel inlet flow velocity has been varied between 0.26, 0.52 and 0.78m/s. The power input to the module is 4Wthis report, particular attention is directed to the fluid flow and adiabatic wall temperature($T_(ad)$) around a module which is under fluid mechanical and thermal influences of the module. The fluid flow around a module was visualized using PIV system. Liquid crystal thernography is used to determine the adiabatic wall temperature around a heated module on an acrylic board. Plots of $T_(ad)$ (or F) show marked effects of dispersion of thermal wake near the module.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.3
• /
• pp.35-43
• /
• 2017

In IoT(Internet of Things) environment, users want to receive customized service by users' personal device such as smart watch and pendant. To fulfill this requirement, the mobile device should support a lot of functions. However, the miniaturization of mobile devices is another requirement and has limitation such as tiny display. limited I/O, and less powerful processors. To solve this limitation problem and provide customized service to users, this paper proposes a collaboration system for sharing various computing resources. The paper also proposes the method for reasoning and recommending suitable resources to compose the user-requested service in small device with limited power on expected time. For this goal, our system adopts MBTI(Myers-Briggs Type Indicator) to analyzes user's behavior pattern and recommends personalized resources based on the result of the analyzation. The evaluation in this paper shows that our approach not only reduces recommendation time but also increases user satisfaction with the result of recommendation.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.516-518
• /
• 1995

This paper presents an integrated fault diagnosis expert system for power systems. The proposed system diagnoses various faults occurred in both substations and transmission lines even in the case that substation fault is spreaded over the network. To cope with this problem, A meta-inference method is proposed. This scheme shares same the data structure with the pre-developed intelligent operational aid expert system installed in a practical sub-control center, without modification. This advanced integrated diagnosis system is developed using a low cost personal computer owing to the special modular programming technique. Case studies show a promising possibility of the proposed method.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2001.11a
• /
• pp.297-301
• /
• 2001

PC카드 형태로 개발되어 사용되는 보안토큰은 다양한 보안서비스를 바탕으로 차세대 정보보호 기술의 핵심기술로 떠오르고 있다. PC카드 보안토큰 휴대용 컴퓨터 운용을 위한 메모리 카드 표준 인터페이스를 수용하여 다양한 암호알고리즘 수행이 가능하고, 사용자의 요구조건을 비교적 쉽게 수용하고, 아울러 다양한 응용분야에 사용되는 등의 장점을 가지고 있다. 본 논문에서는 Motorola PowerPC 기반의 MPC860 마이크로 프로세서가 장착된 제어보드를 이용하여 PC카드 보안토큰에 대한 PCMCIA(Personal Computer Memory Card International Association) 카드 장치구동기 및 API(Application Program Interface)를 설계/구현하여 각각의 기능시험을 통해 그 기능들을 검증하였다.