• Title/Summary/Keyword: Perpendicular Magnetic Recording

Search Result 126, Processing Time 0.02 seconds

Crystal Orientation of Thin Films Prepared by Facing Targets Sputtering (대향타겟스퍼터링으로 제작된 박막의 결정 배향성)

  • 김경환;손인환;송기봉;신촌수양;중천무수;직강정언
    • Journal of the Korean institute of surface engineering
    • /
    • v.31 no.4
    • /
    • pp.217-222
    • /
    • 1998
  • The Facing Targets Sputtering(FTS) system has several advantages for preparing films over a wide range of working gas pressure on plasma-free substrates. Co-Cr thin films seem to be one of the most promising media for perpendicular magnetic recording system. In this study, the capabillities of the system fordepositing C0-Cr films have been investigated. Under various Ar gas pressure, films with morphologically dense microstructure and good c-axis orientation were deposited, even when the incident angle $\psi_x$ of sputtered part icles to the film plane was below abount $50^{\circ}C$. this may imply that the shadowing effect by obique incidence of particle can be compensated by rapid surface diffusion owing to the high kinetic energy of particles arriving at the growing film. It has been confirmed that the FTS system is very useful for perparing Co-Cr thin films recorging media.

  • PDF

Effect of Oxygen on the Magnetic and Recording Characteristics of Magneto-Optical Disk (광자기 디스크의 기록 및 자기적 특성에 산소가 미치는 영향)

  • Choe, G.
    • Journal of the Korean Magnetics Society
    • /
    • v.3 no.3
    • /
    • pp.229-233
    • /
    • 1993
  • The effects of differential partial pressures of oxygen during sputtering on the magnetic and recording characteristics of magneto-optical disks were investigated. Different flows of oxygen were deliberately introduced into the sputtering chamber to have a variety of partial pressures of oxygen during sputtering. A residual gas analyzer was employed to monitor the oxygen peak before, during, and after sputtering and to estimate the reacted oxygen amount. Most of the oxygen introduced into the chamaber was reacted during sputtering. As the partial pressure of oxygen increased, the oxygen content of the TbFeCoCr film increased also. The oxygen appeared to be bound as Tb-O, effectively decreasing the magnetically active Tb content of the film The coercivity decreased but the squareness of the Kerr hysteresis loops was still excellent. The perpendicular anisotropy was not significantly affected by oxygen amount. The carrier-to-noise ratio, includi!1g the write power sensitivity and bias field sensitivity did not change too much with oxygen content in the film The disks sputtered with oxygen showed better bias field sensitivity with lower write power threshold than the disk sputtered without oxygen, due to high demagnetization during domain formation. No significant degradation of coercivity for the disk sputtered oxygen was observed during an accelerated aging test.

  • PDF

PRML detection scheme with modified trellis for a MTR code (MTR 코드를 위한 변형된 트렐리스를 갖는 PRML 검출 방법)

  • Lee Joo hyun;Lee Jea jin
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.29 no.12C
    • /
    • pp.1601-1605
    • /
    • 2004
  • When codeword sequence has two or less successive transitions, the performance of 4th-order partial response maximum-likelihood (PRML) detector can be improved. However, the code leads to an unacceptable loss of performance due to the low code rate. For a rate 718 code that MTR constraint (i) of each codeword is limited to 2, and j is allowed to be 3 when codewords are connected, we modified the trellis of PRML detector to combine j=2 with J=3. We confirmed that the rate 718 coded 4th-order PRML detection with combined trellis achieves the SNR gain more than 2dB compared to the rate 819 coded 4u_order PRML detection at 10-s BER in high-density longitudinal or perpendicular magnetic recording systems.

Effects of Sputtering Parameters on the Properties of Co/Pd Multilayered Films

  • Shin, J. N.;Hong, D. H.;Lee, T. D.
    • Journal of Magnetics
    • /
    • v.8 no.4
    • /
    • pp.146-148
    • /
    • 2003
  • Multilayered films of Co/Pd have been studied as a candidate material for a high density perpendicular recording medium due to higher anisotropy energy. However, high exchange coupling among grains results in large transition noise. To reduce the exchange coupling and grain size, addition of 3rd elements and physical separation of grains have been attempted. In the present paper, effects of sputtering pressure, Co sublayer thickness and Pd underlayer thickness on magnetic properties and microstructures were studied. It was found that by increasing sputtering pressure from 5 mTorr to 25 mTorr, Ms decreased to one half and coercivity increased more than 5000 Oe. The increase of the coercivity is associated with physical separation of grains by high pressure sputtering. Ms per volume of Co for Co/Pd multilayered film deposited at 25 mTorr shows continuous decrease with increasing Co sublayer thickness. This was related to void formation and intermixing of Co/Pd interface. Also, effect of Pd underlayer thickness on magnetic properties will be discussed.

Fabrication and magnetic properties of Co-Zn ferrite thin films prepared by a sol-gel process (Sol-gel 법에 의한 Co-Zn Ferrite 박막의 제호와 자기 특성에 관한 연구)

  • 김철성;안성용;이승화;양계준;류연국
    • Journal of the Korean Magnetics Society
    • /
    • v.11 no.4
    • /
    • pp.168-172
    • /
    • 2001
  • Co-Zn ferrite thin films grown on thermally oxidized silicon wafers were fabricated by a sol-gel method. Magnetic and structural properties of Co-Zn thin films were investigated by using x-ray diffractometer (XRD), atomic force microscopy (AFM), auger electron spectroscopy (AES) and a vibrating sample magnetometer (VSM). Co-Zn ferrite thin films annealed at 400 $^{\circ}C$ presented have only a single phase spinel structure without any preferred crystallite orientation. Their surface roughness of Co-Zn ferrite thin films was shown as less than 3 nm and the grain size was about 40 nm for annealing temperatures over 600 $^{\circ}C$. A moderate saturation magnetization of Co-Zn ferrite thin films for recording media was obtained in this study and there is no significant difference of their magnetic property with those external fields of parallel and perpendicular to planes of the films. The maximum value of the coercivity was obtained as 1,900 Oe for Co-Zn ferrite thin film annealed at 600 $^{\circ}C$.

  • PDF

Performance of the Recursive Systematic Convolutional Code with Turbo-Equalization Method for PMR Channel (수직자기기록 채널에서 터보등화기 구조를 이용한 순환 구조적 길쌈 부호의 성능)

  • Park, Dong-Hyuk;Lee, Jae-Jin
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.34 no.1C
    • /
    • pp.15-20
    • /
    • 2009
  • For perpendicular magnetic recording (PMR) channels, noise-predictive maximum likelihood (NPML) detection method has been used. But, it is hard to expect improving the performance when the bit density is increased. Hence, we exploit the coding methods which has good performance. In this paper, we show the performance of the recursive systematic convolutional (RSC) codes with turbo-equalization method with different channel bit densities. The noise model is 80% jitter noise and 20% AWGN.