• 한국생산제조학회지
• /
• 제9권3호
• /
• pp.62-68
• /
• 2000

In order to automate straightening process of deflected beams an adaptive three-point bending controller is studies which estimates and controls springback of beams under three-point bending. An analytical load-deflection model for three-point bending of beams with circular cross sections is derived nondimensionally. In spite of variation of material and process parameters this model can be applied to springback estimation by measuring real-time values of reactive load and deflection of the beam. A hydraulic punch stroke controller is designed to take real-time controls of the permanent deflection of the beam. The validity of the proposed system is verified through experiments.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권5호
• /
• pp.315-320
• /
• 2000

This paper presents the fabrication and test of a micropump with an electromagnetic actuator and a pair of aluminum flap valves. The actuator consists of a solenoid coil, a permanent magnet and an actuator diaphragm. The actuator diaphragm is fabricated by the spin coating of silicone rubber. The valve are passive ones and are fabricated by micromachining. The deflection of the fabricated actuator diaphragm is measured with a laser vibrometer. The deflection of the actuator diaphragm is proportional to the input current. The measured deflection of the fabricated diaphragm is $400 \mum$,/TEX> when the input is 118 mApp, and the cut-off frequency is 50 Hz. The maximum flow rate of the fabricated micropump with the electromagnetic actuator is about 5$0 \muell/min$ at 5 Hz when the input current and the duty ratio of the square was are 118 mApp and 50%, respectively.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2451-2460
• /
• 2000

In order to minimize straightness error of deflected shaft, a geometric adaptive straightness controller system is studied. A multi-step straightening and a three-point bending process have been developed for the geometric adaptive straightness controller. Load-deflection relationship, on-line identification of variations of material properties, on-line springback prediction, and real-time hydraulic control methodology are studied for the three-point bending process. By deflection pattern analysis and fuzzy self-learning method in the multi-step straightening process, a straightening point and direction, desired permanent deflection and supporting condition are determined. An automatic straightening machine has been fabricated for rack bars by using the developed ideas. Validity of the proposed system is verified through experiments.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권6호
• /
• pp.670-682
• /
• 2018

This paper presents the experimental and numerical investigation results of the response of low-temperature steel (LT-FH32 grade steel) beams under repeated impacts at room temperature and a single impact at a sub-zero temperature. After conducting tensile tests at room and sub-zero, repeated impact tests were conducted on two clamped single-beam models at room temperature, and single-impact tests of two other clamped single-beam models were conducted at $-50^{\circ}C$. The single and repeated impact tests were conducted by releasing a knife-edge striker using a drop testing machine. The permanent deflection of the model measured after each impact gradually increased with increasing number of impacts. Under the reduced temperature, the permanent deflection of the models slightly decreased. The numerical analyses were also performed to predict the damage response of the tested single-beam models. A comparison of the numerical prediction with those of experiments showed quite reasonable agreement.

• 대한조선학회논문집
• /
• 제55권2호
• /
• pp.178-186
• /
• 2018

The scale effects on the permanent deformations and fractures of structures subjected to impact loadings have been aware by structural engineers for a long time. Experimental investigations have been performed with various structures to demonstrate the effects, but very few are directly related with marine structural elements. Furthermore, the causes of the scale effects have not clearly been answered yet. In this study, to quantify the scale effects on the permanent deflections, lateral collision tests were performed on steel unstiffened plates and the numerical analyses of the tested models were also conducted using a commercial package, Abaqus. After the substantiation of the numerical tool using the test results, a parametric study was carried out considering and neglecting the strain-rate hardening. Based upon the parametric study results, it may be concluded that the main cause of the scale effects on the permanent deflections of steel unstiffened plates subjected to lateral collision loads is the strain-rate effects.

• 콘크리트학회논문집
• /
• 제18권1호
• /
• pp.73-82
• /
• 2006

최근까지의 거푸집 공법은 거푸집의 설치 및 탈형공정에 따른 공기연장, 인건비 상승에 따른 추가적인 비용소모, 거푸집 탈형후 발생되는 건설 폐자재로 인한 환경문제 유발 등의 직 간접적인 문제를 발생시켜 왔다. 따라서 본 연구에서는 이와 같은 문제점을 해결하고자 스테인레스 강섬유를 이용한 고성능 영구거푸집 공법에 대한 재료 및 구조적 거동특성을 분석하였다. 재료적 거동특성의 경우, 고성능 영구거푸집의 휨 거동에 있어 안정적인 연성거동 특성을 나타내었으며 후타설 콘크리트와의 부착성능도 우수한 것으로 나타났다. 구조적 거동특성의 경우, 고성능 영구거푸집의 압축단 및 인장단 거동특성이 분석되었으며 실험결과, 추가적인 보강성능 이외에 충분한 구조거동 특성을 발휘한 것으로 분석되었다.

• 한국기계가공학회지
• /
• 제6권3호
• /
• pp.47-52
• /
• 2007

LMTT (Linear Motor based Transfer Technology), which is a new type transfer system used in the maritime container terminal for the port automation, is driven by PM LSM (Permanent Magnetic Linear Synchronous Motor), and largely consists of a controller, shuttle car, and rail. The shuttle car is divided into the frame part, the driving part, and wheels. Because the shuttle car is supported by four wheels in opposition to have five times length for the width of it, a larger deflection than other transfer system using the linear motor occurs. This deflection changes the gap between the mover and the stator, and then brings on an ununiform thrust force. So in this study, we dealt with the structural design for the mover of the shuttle car to generate the uniform thrust force for the efficient control of it. For the investigation, the thickness for each beam of the mover was adopted as design variables, the weight of the mover as objective function, and stress and deflection of the mover as constraint condition.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.130-131
• /
• 2019

As part of recent low-energy policies, thermal insulation standards for buildings are being tightened every year. In addition, the conventional styrofoam insulating material has a problem that the thickness of the heat insulating material to achieve a standard heat permeability is rapidly increased. Due to the thick insulation, there is a high risk of spreading vulnerable structures such as fire due to lack of space between buildings. On the other hand, the method of using the insulation as a formwork is known to be excellent cost saving effect through the reduction of the formwork usage and the simplification of the external insulation work. In order to solve this problem, this study aims to fabricate a multi-layered insulator that combines high-performance phenolic foam insulation and styrofoam insulation and evaluate the deflection characteristics for use as formwork.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권5호
• /
• pp.21-30
• /
• 2013

본 연구는 현재 내측 거더부에 적용하고 있는 LB-Deck를 캔틸레버부까지 확대 적용하기 위하여 Precast Concrete Cantilever Deck를 제안하고, 제안된 PCC-Deck의 구조적인 안전성과 처짐등 거동특성을 평가하였다. PCC-Deck의 구성은 일반부 LB-Deck와 캔틸레버부의 Deck를 주철근과 격자봉을 연장하여 제작하는 방식으로, 기존 LB-Deck을 사용할 경우 발생하는 전도에 대한 문제를 보완하였다. 수치해석 및 실험 결과 최적의 구조로 제안된 D-Type (상부근 16 mm, 격자봉 6 mm, 하부근 12 mm)의 경우 최대하중 28 kN, 최대처짐 27.49 mm로 나타났으며, 자중을 제외한 하중 10kN에서의 시공하중에 대한 내하하중 비율이 2.8로 가장 좋은 결과를 나타냈다. 이러한 결과는 다른 Type의 PCC-Deck 실험체 대비 77.5%의 개선효과가 있는 것으로 평가되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1139-1146
• /
• 2000

The frequencies of principal noise in interior permanent motor originate form two sources. One is torque ripple that is composed of cogging torque, magnetic torque ripple and reluctance torque ripple. The other is induced by natural frequencies. In this paper, the torque ripple and its influence on noise was examined by theoretical analysis. Understanding relation of dynamic characteristics and noise, natural frequencies and mode shapes were obtained by experimentation and operational deflection shape was observed. Finally, the method of predicting frequencies of principal noise was proposed.