• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.04a
• /
• pp.414-421
• /
• 2001

Recently, the damping effect of building structures are greatly reduced because the use of non-structures members as like curtain wall are decreased and large open space are in need for the service of buildings. Assembly and office buildings with a lower natural frequency have a higher possibility of experiencing excessive vibration induced by human activities as like jumping, running and walking. These excessive vibration make the occupants uncomfortable and the serviceability deterioration. The common method of application of walking loads for the vibration analysis of structures subjected to walking loads is to inflict a series unit walking load and a periodic function at a node. But this method could not consider the moving effect of walking. In this study, natural frequency and damping ratio of plate structure are evaluated by heel drop tests. And new application of equivalent walking loads are introduced for vibration analysis of real slab system subjected to walking loads. The response obtained from the numerical analysis are compared well to the results measured by experimental tests. It is possible to efficiently analyze the vibration of floor which is subjected to walking loads by applying equivalent walking loads.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.2
• /
• pp.10-17
• /
• 2004

In this research, a numerical simulation for the acoustic sounds around a two-dimensional circular cylinder in a uniform flaw was developed, using the finite difference lattice Boltzmann model. We examine the boundary condition, which is determined by the distribution function concerning density, velocity, and internal energy at the boundary node. Pressure variation, due to the emission of the acoustic waves, is very small, but we can detect this periodic variation in the region far from the cylinder. Daple-like emission of acoustic waves is seen, and these waves travel with the speed of sound, and are synchronized with the frequency of the lift on the cylinder, due to the Karman vortex street. It is also apparent that the size of the sound pressure is proportional to the central distance to the circular cylinder. The lattice BGK model for compressible fluids is shown to be a powerful tool for the simulation of gas flaws.

• Speech Sciences
• /
• v.8 no.4
• /
• pp.119-129
• /
• 2001

Language is one aspect of cognition, along with attention and concentration, learning and memory, visuospatial abilities, and executive function. The purpose of this study was to determine the effect of language intervention by cognitive approach on language expressive performance in a patient with conduction aphasia. This study used several tasks such as Attention and concentration task, visual memory tasks, memory tasks, categorization, divergent thinking, self-monitoring and evaluate thinking. The effects of treatment were evaluated by periodic probing of both trained and untrained familiar words in three tasks; picture naming, answering to questions and telling stories. The results showed improvements both in trained and untrained words. Therefore, we concluded that expressive language performance of this aphasic patient is amenable to this intervention, and that cognitive therapy approach can be useful.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.76-78
• /
• 1999

This paper presents Galerkin- and Upwind-finite element analyses solution in the travelling magnetic filed problem. The travelling magnetic field problem is subject to convective- diffusion equation. Therefore, the solution derived from Galerkin-FEM with linear interpolation function may oscillate between the adjacent nodes. A simple model with Derichlet, Noumann and periodic boundary condition respectively, have been analyzed to investigate stabilities of solutions. It is concluded that the solution of Galerkin-FEM may oscillate according to boundary condition and element type, but that of Upwind-FEM is stable regardless boundary condition.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.3
• /
• pp.373-380
• /
• 2001

In this study, a single Taylor bubble and a train of Taylor bubbles rising in a vertical tube were simulated numerically. A finite difference method was used to solve the mass and momentum equations for the liquid-gas region. The liquid-gas interface was captured by a level set function which is defined a signed distance from the interface. For a train of Taylor bubbles repeated periodically in space, the periodic conditions were imposed at the boundaries normal to the gravitational direction and the pressure boundary conditions were iteratively determined so that the computed flow rate should be equal to a given flow rate. Based on the numerical simulation, the calculated shape and rise velocity of a Taylor bubble were found to be in good agreement with the experimental data reported in the literature.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.5
• /
• pp.21-30
• /
• 1973

A snaked-line array antenna is investigated for the use of high gain antenna at X-band frequency by studing its attenation constant and the radiation pattern. Attenuation constant which is equivalent to the radiation resistance varies roughly as a function of the square of sinh$\theta$a where sin$\theta$a corresponds to the amplitude of sinusoidal form of snaked-line. The directivity is determined by the number of snaked-line antennas and the periodic units of a snaked line.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.12
• /
• pp.9-14
• /
• 2000

A numerical method for scattering of electromagnetic waves from a arbitrary shaped grating covered with dielectric slab is considered for TE polarization case from the viewpoints of both reflection grating problem and leaky wave antenna problem. The analysis is based on a periodic Green's function and the method of moments. Numerical results involving some combinations of geometric parameters are presented in terms of relative scattered powers of spectral modes and complex propagation constants.

• 전기의세계
• /
• v.31 no.1
• /
• pp.59-67
• /
• 1982

This paper suggests easy stabilization methods for linear time-varying systems with delay in the state. While existing methods employ the function space concept, the methods introduced in this paper transform the delay systems into the non-delay systems so that the well known methods for finite dimensional systems can be utilized. Particularly the intervalwise predictor is introduced and shown to satisfy an ordinary system. Control laws stabilizing the non-delay systems satisfied by this predictor will be shown to at least pointwise stabilize the delay systems with the additional strong possibility of true stabilization. In order to combine two steps of the predictor method, first transformation and then stabilization, an intervalwise regulator problem is suggested whose optimal control laws incorporate the intervalwise predictor as an integral part and also at least pointwise stabilize the delay systems. Since the above mentioned methods render the periodic feedback gains for time invariant systems the pointwise predictor and regulator are introduced in order to obtain the constant feedback gains, with additional stability properties. The control laws given in this paper are perhaps simplest and easiest to implement.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.11C no.3
• /
• pp.91-95
• /
• 2001

Reflective holographic polymer dispersed liquid crystal(HPDLC) device has a multilayer structure consisting of alternate layers of polymer and liquid crystal droplets. Periodic modulation of a refractive index reflects light of a specific wavelength in accordance with Braggs law. Samples cured isotropically were illuminated with an Argon-ion lase at 514nm. We optimized the reflcetion efficiency of HPDLC as a function of monomer functionality, LC composition and irradiation intensity. The properties of the HPDLC films were observed by UV-visible spectroscopy. We found that the maximum reflection efficiency depends on the monomer functionality, LC composition, and laser intensity. We expect these films could be used in full-color reflective display by stacking them to obtain a mixture of colors.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.225-228
• /
• 2008

There are many studies about submerged structures or porous wave absorbers to decrease damage of coast and structures. Submerged structures and porous wave absorber are decreasing energy of incoming wave by reflecting or dissipation with changing depth or with porous rubble mound. This study addresses the reflection and transmission of long wave from a trapezoidal breakwater and a vertical porous wave absorber at the same time. A systematic shape transfer is derived to determine wave reflection and transmission. And periodic solutions are matched at the slope and the front face of the absorber by assuming continuity of pressure and mass. The transmission coefficient is determined as a function of parameters describing the incoming waves, transmitting waves through the trapezoidal breakwater and the absorber characteristics.