• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.76-79
• /
• 2005

• 동력기계공학회지
• /
• 제12권3호
• /
• pp.38-43
• /
• 2008

The usage of electric forklift truck is gradually increasing due to the convenience at conveying and arranging the materials in the industrial field. In this study, the author designed and suggested the optimum driving system and load tester which both of them are the most important part of the forklift truck. The planetary gear is chose to driving system because it makes big power even though the motor size is small. The gear teeth of planetary gear were designed and the designed planetary gear was tested considering the yield strength and the abrasion of gear teeth. The B-Type electric brake which consists of multiple plates and operates with non-magnetic type was connected with a single shaft in the driving system. So, it can be applied at the sudden braking situation which has the torque increment. And it has the compact size and excellent durability Load tester can give the various levels of load to the planetary gear of driving system in the electric forklift truck and it can also measure the levels of the load which were applied. Therefore, we can measure the noise, torque and perform the durability, vibration tests using load tester. It will be economical because many kinds of test can be performed using reasonable priced load tester The driving system of electric forklift truck which has sufficient competitive can be manufactured using our designed planetary gear reducer with reasonable price. The designed load tester can use for checking the performance of other reducers, as well.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1320-1329
• /
• 1990

본 연구에서는 토크로드의 여러가지 성능시험이 하능한 시험기의 설계와 개발 에 관하여 논하려 한다. 토크 로드의 정적 성능은, 반경방향 스프링 특성시험 및 비 틀림 방향 스프링 특성시험 그리고 회전토크 특성시험 등을 통하여 평가된다. 그러 나, 이들 세가지 성능시험을 위한 시험기를 각각 개발할 경우 소요비용이 과다해진다. 따라서, 한정된 예산과 시험기 개발후 시험평가 공정의 간소화 등을 고려하여, 본 시 험기는 3대의 시험기로써 하여야 할 기능을 한대의 시험기로써 할수 있도록 개발하였 다. 시험기 개발에 따른 기술적인 고찰과, 본 시험기로 정하중에서의 토크 로드 부 품의 성능시험을 수행하고 서어보 유압식 구조물 피로 시험기를 사용하여 동 부품의 피로 내구성 시험을 실시하고, 고무의 조성변화, 접착성 개선 등을 통해 내구성을 향 상시킴으로 국산화 개발을 가능케 한 기술적 내용들을 살펴 보고자 한다.

• 한국인터넷방송통신학회논문지
• /
• 제23권6호
• /
• pp.97-102
• /
• 2023

본 연구는 최근 다양화, 대규화 되어가는 IoT시스템을 위한 시험기 개선에 관한 것으로 IoT성능시험기의 패킷 처리 성능개선, 트래픽 프로토콜 생성과 동작에 유연성을 확보하는 방안에 대한 것이다. 본 연구의 목표는 고도화되어 가는 대용량 IoT 네트워크 시스템에서 데이터 트래픽 전송의 안정성을 사전에 검증하고 성능을 측정하는 개방형 소프트웨어인 DPDK기반 고속 IoT 네트워크 성능시험 시스템을 설계하는 것이다. DPDK 기반 트래픽 발생기를 이용하여 고속 IoT 성능시험기의 기본 구성을 설계하였으며 실험을 통해 해당 시스템 적용시 트래픽 모델링하고 패킷생성능력의 기대효과를 제시하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.149-154
• /
• 2001

In case of high capacity load force as millions of tons, it is difficult to measure the force with load cell. But we can measure and calculate the force with applied pressure and ram area of hydraulic jack. The 5,200 ton compression load tester is composed of thirteen hydraulic jack with 400 ton capacity. This paper explains the method of measuring the vertical compression load and provides characteristics of unit jack, and displacement of upper structure under maximum load condition.

• 한국생산제조학회지
• /
• 제18권4호
• /
• pp.362-368
• /
• 2009

In general, circuit board assemblies experience various mechanical loadings during assembly and in actual use. The repeated cyclic bending can cause electrical failures due to circuit board cracks, solder interconnects cracks, and the component cracks. In this paper, we report on the failure characteristics of semiconductor chips under the repeated cyclic bending. We first describe a new 4-point bending tester, which is developed according to JEDEC standard No. 22B113. The performance of the tester is then estimated through actual experiments. Test results reveal that the cracks first occur on the outer balls around 20,000 cycles and gradually propagate to the inner balls where cracks are found around 70,000 cycles.

• 한국정보통신학회논문지
• /
• 제19권5호
• /
• pp.1228-1234
• /
• 2015

본 논문에서는 열전소자를 이용한 온도 환경 시험기에 적용할 수 있는 퍼지제어기를 개발하였다. 온도환경 시험기에 퍼지제어기를 구현하기 위해 마이컴기반의 온도제어시스템을 제작하였다. 안정적인 온도 유지 및 온도 변화 속도를 향상시키기 위하여 퍼지제어기를 내장한 온도환경 시험기를 개발하였다. 제안한 방법의 유용성을 입증하기 위하여, 일반적으로 널리 사용되고 있는 비례-적분-미분 제어기와 비교하였다. 실험결과 제안한 퍼지제어기가 기존의 비례-적분-미분 제어기보다 상승시간, 오버슈트 면에서 좋은 제어성능을 보임을 알 수 있었다.

• 유공압시스템학회논문집
• /
• 제3권4호
• /
• pp.21-28
• /
• 2006

The proportional control solenoid valves as well as the PWM solenoid valves operated by electric signal play an important role in the hydraulic system for automatic transmissions to improve the shift quality. However it is not generally available for the performance data because most of the automotive parts manufacturer don't release the specific test results, especially dynamic performance that is essential to design a shift control algorithm. In this research, a performance test equipment that can be applied to various types of pressure control solenoid valve was developed. It was implemented by 8-bit micro-controller with many useful functions such as adjustable PWM carrier frequency, embedded function generator, current controller, data monitoring and acquisitions, etc. for the test of dynamic performance of solenoid valve as well as the steady-state pressure characteristics. The performance test results for the direct type proportional control solenoid valve show not only the validity of overall functions but also its usefulness as a hydraulic valve tester.

• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.186-193
• /
• 2014

This paper presents characteristic analysis of underwater bearing for canned type electric water pump. Characteristic analysis of underwater bearing was performed using self-developed performance tester, which capable of torque change, noise change, motor speed change and abrasion loss test with respect to temperature change of underwater bearing. The performance tester can be monitored in real time by designing the control unit using the Labview program. The performance experiment was performed through comparison of the silicon carbide (SIC) and the carbon bearing. From the experiment results, performance of SIC bearing was better than carbon bearing at the abrasion and temperature experiment.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.207.1-207.1
• /
• 2011

The performance of a francis turbine is studied by applying a new performance evaluation tester. the performance of a francis turbine is predicted under several operating conditions and the prediction results are compared with model test data. As a result, it is demonstrated that the present method can predict the performance of a francis turbine with high accuracy and has usefullness as an engineering tool on the performance of hydraulic turbines.