• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.161-164
• /
• 2006

A design program has been developed to predict film cooling performance in a liquid rocket engine combustion chamber. A thermal protecting effect of low mixture ratio gas has been analysed by CFD. A one-dimensional film cooling model based on the CFD results has been implemented in the previously developed design program of regenerative cooling. The predicted heat flux at the nozzle throat ranges from -16% to +28% when it is compared to the published measured data. The throat heat flux reduces by 36% when film cooling of 10% of fuel mass flow rate is applied.

• Journal of Power System Engineering
• /
• v.18 no.5
• /
• pp.11-15
• /
• 2014

Currently, there are active researches being conducted on a new combustion technology that can reduce emission quantity while enhancing vehicle performance as well as Improving fuel quality. In a gasoline engine that uses petroleum, high volatility makes it easy to jump spark ignition and prevent knocking phenomenon that occurs inside an engine. In a diesel engine that uses diesel fuel, high volatility reduces combustion residues and toxic gas and is therefore good for protecting the environment. Therefore, for fuel used in a vehicle, volatility is an important factor that influences not only engine performance but also environmental protection. This research conducted a distillation experiment using gasoline and diesel fuel for vehicles produced by domestic oil companies. The test was conducted in accordance with the method of distillation experiment described in KS M ISO3405. In addition, it used the result of analysis from the experiment to examine visual distillation characteristics of each fuel and developed a formula based on distillation temperature.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.5
• /
• pp.663-668
• /
• 2012

A TPMS(Tire Pressure Monitoring System) is a wireless communication system designed to monitor the pressure and temperature of pneumatic tires of a vehicle. In order to provide the aid in protecting a driver, this system reports tire pressure information to the driver of the vehicle. Since the wireless communication technique should be employed to transmit the TPMS data from each tire to signal processing unit in the vehicle, it suffers from interference signals from external electrical or electronics equipments. In this paper, we propose the TPMS interference cancellation technique based on GSC(Generalized Sidelobe Canceler), which does not have only the excellent performance like MVDR(Minimum-Variance-Distortionless-Response) but also has the low computational complexity comparing with MVDR. The performance of interference suppression is conformed by computer simulation examples.

• The KIPS Transactions:PartC
• /
• v.10C no.6
• /
• pp.755-762
• /
• 2003

For the route optimization in the MIPv6, MN(Mobile Node) sends CN(Correspondent Node) a binding update message to notify the binding of is HoA(Home Address) with its new CoA(Care-of Address). However, unautenticated binding updates expose the involved MN and CM to various sucurity attacks. Thus, protecting the binding update process becomes of paramount importance in the MIPv6, and several secure binding update protocols, and the performance of packet exchanges and cryptographic operations. Then, we analyze the four typical binding update protocols based on the presented criterions. In addition, we propose some improvement tips for secure binding updates.

• Journal of the Korean Society of Safety
• /
• v.35 no.1
• /
• pp.53-61
• /
• 2020

This study proposes a new damper configuration for seismic performance improvement of heavy sliding facilities inside a building. For this purpose, we deal with two connection types of control system, and the parametric study has been performed to investigate their comparative seismic performances according to the variations of the control capacity. In order to simulate the seismic responses of the proposed system, we employed a recently-developed seismic response analysis method that can deal with the two-mass system with nonlinear frictional sliding behavior. The numerical results demonstrate that the typical method of diagonal bracing damper connection can exhibit effective control performance both on structure and the heavy sliding facilities, whereas the structure-facilities connection method does not show any control effect on both responses. On the other hand, the typical method has some limitations that it can adversely cause excessive sliding of the facilities, depending upon the frequency characteristics of structure and earthquake. On the contrary, the structure-facilities connection method is very effective in reducing the sliding displacement of the heavy facilities, even with small amount of control capacity. Thus, the following potential expectations can be inferred from these results: The typical diagonal bracing damper connection method will have some promising benefits in controlling the sliding facilities inside the building as well as the building itself, and the structure-facilities connection method can be a cost-effective way of protecting the internal heavy important facilities inside the structure already designed with sufficient seismic performance.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.6A
• /
• pp.85-96
• /
• 2008

Neighbor Discovery(ND) protocol is used to exchange an information of the neighboring nodes on the same link in the IPv6 protocol environment. For protecting the ND protocol, firstly utilizing Authentication Header(AH) of the IPsec protocol was proposed. But the method has some problems-uses of key exchange protocol is not available and it is hard to distribute manual keys. And then secondly the SEcure Neighbor Discovery(SEND) protocol which protects all of the ND message with digital signature was proposed. However, the digital signature technology on the basis of public key cryptography system is commonly known as requiring high cost, therefore it is expected that there is performance degradation in terms of the availability. In the paper, to improve performance of the SEND protocol, we proposed a modified CGA(Cryptographically Generated Address) which is made by additionally adding MAC(Media Access Control) address to the input of the hash function. Also, we proposed cache mechanism. We compared performance of the methods by experimentation.

• Journal of Korea Water Resources Association
• /
• v.38 no.7 s.156
• /
• pp.585-593
• /
• 2005

Recent concerns regarding protecting, identifying, isolating, redundant routing and dewatering of subsystems of water distribution networks have led to the realization of the importance of valves in these systems. Valves serve two purposes namely, flow and pressure control and isolating subsystems due to breakage or contaminant containment. In this paper, valves are considered from the point of view of subsystem isolation. When a water main is required to be closed, it may be in general necessary to close several other pipes in addition to the broken pipe itself depending on the distribution of adjacent valves. This set of pipes is defined as a segment. In this paper a segment analysis for isolating pipes is present and based on the segment analysis, we suggested the Valve Importance Index and the 7 performance indicators to evaluate the system performance. The suggested methodology is applied to a real network to verify the applicability of the methodology.

• Journal of Korea Technology Innovation Society
• /
• v.11 no.2
• /
• pp.171-193
• /
• 2008

Every country of the world in the 21st century is going to push forward the policy protecting their intellectual property right, and international movement to protect their intellectual right is still more strengthened. Under these situations, the firm is required to seek for more efficient methods of technology security and business management while the existence of business itself is at risk. The control of intellectual properties in business should be considered in the patent management. In the company, the industrial property right should be into one of the management resource, and its importance has great influence on the existence of the company. The information in patent data can be used for strategic planning purposes. This study systematically evaluates the patenting behaviour of sample of 27 business firms within the Korean metal industry. Utilizing the patent application data between 2000 and 2005, the relationship between these patenting management and company performance is analysed. This study showed that patent activity per employee and labor productivity are positive relationship, but patent activity per employee and firm size are negative relationship. Since a positive relationship between patenting and company performance could be shown, patent activity gains important as a instrument for R&D planning.

• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.817-826
• /
• 2005

BcN(Broadband convergence Network) is being developed in order to support a variety of network applications, with enhanced capabilities of QoS(Quality of Service) provisioning and security, and IPv6. In a high-speed network environment such as BcN, it if more likely for the network resources to be exposed to various intrusion activities. The propagation speed of intrusion is alto expected to be much faster than in the existing Internet In this paper, we present a multi-domain security management framework which my be used for a global intrusion detection at multiple domains of BcN and describe its characteristics. For the performance evaluation, we first present test results for the security node and compare with other products. Then we design and Implement an OPNET simulator for the proposed framework, and present some simulation results. In the simulation model, we focus on the performance of alert information in the security overlay network.

• 전자공학회논문지 IE
• /
• v.48 no.4
• /
• pp.61-68
• /
• 2011

As business management has a high level of dependence on Informational Technology (IT), protecting assets of a company from disaster is one of the most important thing that IT operating managers should consider. Because data or information is a major source of operation of the company, data security is the first priority as an aspect of continuity of business management. Therefore, this paper will realize disaster recovery system, which is suspended because of disaster, based on cloud computing system. Realized High Available Replicate System applied a method of multi thread target database to improve Replicate performance, and real time synchronize technology can improve efficiency of network. From Active to Active operation, it maximizes use of backup system, and it has a effect to disperse load of source database system. Also, High Available Replicate System realized consistency verification mechanism and monitoring technique. For Performance evaluation, High Available Replicate System used multi thread method, which shows more than threefold of replicate performance than single thread method.