• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.89-92
• /
• 2012

Marine diesel generator(D/G) set which is supported with resilient mounts for vibration isolation has been experienced the resonance problem by the main engine or propeller excitations and rigid body modes. Then the avoidance of resonance is difficult because the several excitations and 6 rigid body modes have to be considered simultaneously. In this paper, stiffness adjustable mounts was developed and proposed to control the natural frequencies of installed D/G set. Operating concept of the mount is that the total stiffness of mount can be changed according to the engagement of secondary rubber element in addition to primary one. The performance of mount was verified with the test rig and actual experiment in D/G set.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.2021-2023
• /
• 1998

In this paper we further propose to add a very simple regenerative clamping circuit to SSIPP to reduce the voltage stress and to recycle the energy trapped in the leakage inductance of the isolation transformer, thus eliminating the need for a lossy snubber circuit. In addition, this proposed clamping circuit also provides a mechanism to reset the magnetizing current of the output transformer of SSIPP employing a Forward converter as the output stage. Simulations and experimental results are reported to verify the operation and performance of the SSIPP with regenerative clamping.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.746-748
• /
• 1997

The parity relation approach for the fault detection and isolation (FDI) of a large diesel engine actuator position servo system is presented. Main purpose of the FDI system is to detect and isolate two important faults, actuator fault and sensor fault, that, if not detected and compensated, degrade the overall system performance. Simulation results are given to show the practical applicability of the FDI scheme.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.9
• /
• pp.743-751
• /
• 1991

This paper presents the 1.5\ulcorner PSA bipolar device which establishes the performance improvement such as the reduction of emitter resistance and substrate junction capacitance. To achieve the above electrical characteristics, RTA process and trench isolation technology were adapted. The emitter resistance and substrate capacitance of npn transistor having 1.5$[\times}6{\mu}m^{2}$emitter area was measured with 63$\Omega$and 28fF, respectively. The minimum propagation delay time shows 121ps at 0.7mW from the measurement of 31 stage ring oscillator.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.143-150
• /
• 1999

The vibration signals of driving parts of electric train are distorted its signal patterns due to the impact components, which occurs when wheel passes rail joints. An elimination method of the impact components is investigated using adaptive signal processing technique in this study. The result shows that adaptive interference canceling method seems to be more effective than line enhancement technique. The application of adaptive interference canceling method to the signal measured at bogie shows that the extractions of the signals of driving parts of traction motor, reduction gear, and axle bearing are successful. Therefore, only the signals of bogie, which is the place to attach an accelerometer easily, is sufficient for the fault diagnosis and the safety evaluation of electric train. Also, adaptive interference canceling method can be applicable to evaluate the performance of vibration isolation between bogie and car body and to investigate the characteristics of indoor sound.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.04a
• /
• pp.115-122
• /
• 1998

Earthquake damage civil engineering structures every year in the world and bridges are no exception. Bridge structures have proven to be vulnerable to earthquake, sustaining damage to substructure and foundation and being totally destroys as superstructures collapse from their supporting elements. The poor seismic performance of bridge structures is surprising in view of the substantial advance made in design and construction for vertical load. Recently, bridge spans have been pushed further than before, alignment has become increasingly complex and aesthetic requirement have been become more demanding. To reduce the seismic force and to improve the safety of the advanced bridges, the bridge bearings which are the substructures and foundations and their connections to the superstructure become more important and critical elements. Therefore, the functions about seismic devices to be using as bridge bearing are discussed.

• Journal of Power System Engineering
• /
• v.18 no.2
• /
• pp.77-82
• /
• 2014

The air spring is widely used in various fields such as a suspension system and an anti-vibration system because the natural frequency is kept constant regardless of the change in the load, spring constant is easy to change, and, vibration and shock isolation performance are excellent. The purpose of this study is to derive a nonlinear governing equation of an air spring, to analyze the effect of the various parameters on the dynamic stiffness of the air spring, and, to suggest a more efficient design method of an air spring system. In order to do so, this study investigates the impact of all the parameters that could affect the dynamic stiffness of the air spring while changing the excitation amplitude and the frequency with a developed governing equation.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.1
• /
• pp.41-55
• /
• 2015

This study is proposed a new hybrid mount having a moving-magnet type electromagnetic actuator to reduce the vibration transmitted from naval shipboard equipment to the structure of the ship's hull. Optimal design specifications are determined through experimental analysis. The detailed design of the hybrid mount is determined through several design steps with electromagnetic numerical analysis using Maxwell Software(S/W). The hybrid mount that combines a rubber mount and an electromagnetic actuator has a fail-safe function for shock resistance. The mount is fabricated and tested using a universal testing machine to evaluate the design specifications. Finally, numerical simulation of the hybrid mount is performed to confirm control performance and applicability.

• Transactions of the Society of Information Storage Systems
• /
• v.7 no.2
• /
• pp.47-52
• /
• 2011

This paper presents a method to improve vibration characteristics of servo track write (STW) fixture. STW fixtures supported by flexible mounts are subject to various vibration sources. Using Finite element analysis (FEA) vibration modes of the fixture are identified. The FEA results suggest certain vibration modes be reduced through design change of flexible mounts to improve vibration responses of the fixture. Based on layered flexible mounts theory a parametric study on shear and bending stiffness is performed to obtain a suitable flexible mount design leading to increased resistance to rocking motion. Experiments confirm improvement of vibration characteristics and drive performance through new mounts design.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.19 no.6
• /
• pp.583-590
• /
• 1990

Free and esterified forms of provitamin D in 30-day-old mele rat skin were isolated and quantitated using silicic acid column chromatography and high-performance liquid chromatography(HPLC) systems. Two forms of free provitamin D(cholesta-5, 7-dien-$3{\beta}$-ol and cholesta-5, 7, 24-trien-$3{\beta}$-ol) and at least thirteen esterified forms of provitamin D were isolated. The average total concentration of provitamin D in the whole skin was $6,056ng/cm^2$. The skin contained $846ng/cm^2$ of free provitamin D and $5,209ng/cm^2$ of esterified provitamin D. The proportion of esterified provitamin D in the skin was 86%.