• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2007년도 춘계학술논문발표회 논문집
• /
• pp.325-331
• /
• 2007

• 소성∙가공
• /
• 제13권3호
• /
• pp.242-247
• /
• 2004

Literature review on reliability test method for developing high performance optical/thermofluidic components. Since the miniaturization by the conventional mechanical process is limited to milli-structure, i.e. $10^{-3}m$, new technology for fabricating of mechanical components is needed to match cost, reliability, and integrability criteria of micro-structure. Although numbers of various researches on MEMS/MOEMS devices and components, including material characterization, design and optimization, system validation, etc., the lack of standards and specifications make the researches and developments difficult. For that reason, this paper is intended to propose the methods of reliability test for measuring the mechanical property of optical/ thermofluidic components.

• 산업경영시스템학회지
• /
• 제25권6호
• /
• pp.42-47
• /
• 2002

This paper examines the effects on mental task of changes in the intensity of physical activity. A treadmill-equipped instrument and perception tester were used to attain several levels of physical activity. In this paper, in order to determine the individual levels of physical activity of subjects, Borg-RPE scale, heart rate(HR) and respiratory quotient(RQ) were used. Also, an arithmetic addition test in whole-body activity on treadmill-equipped instrument as an indicator of mental task were performed. In the above experiments, the scores obtained in arithmetic addition test administered before and after physical activity at each intensity level used. Restricted within the limits of this paper, the results of these tests showed that the performance of mental task was Increased after physical activity.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.745-748
• /
• 2008

On investigation about quick measurement technology of unit water at range of W/B=35% in high strength, the average error of the Di-electric constant moisture tester A has measured more than $23.0kg/m^3$ unit water content of design and the average error of the method of unit volume weigh was less than $-9.6kg/m^3$. The average error with mixing factor has influenced with a kind of sand, but had not influenced with unit water content of design. Therefore, it will be for introduce business decide require more than a study about cement, sand, superplasticizer, etc.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.310-317
• /
• 2000

Tribological properties of friction materials containing different volume ratios of solid lubricants (graphite and MoS$_2$) were studied using a pad-on-disk type friction tester. Morphology and thickness of the friction film were carefully examined to correlate the friction performance with the property of the friction film. Results showed that the friction materials containing 16vo1. % of graphite and 5 vol. % of MoS$_2$exhibited best friction stability among others. In particular, the thickness of the friction film decreased as the amount of MoS$_2$increased and severe friction oscillation was observed when the friction material contained MoS$_2$only (21 vol. %). Microscopic observations and friction tests suggested that the coherent thick transfer film improved the friction stability.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.49-54
• /
• 2001

Monolayers such as self-assembled monolayer (SAM) have received considerable attention to reduce stiction and friction in micro-devices and microelectromechanical systems (MEMS). Various organic molecular films were investigated to obtain better understanding of their tribological behaviors and adhesion property. The organic molecular films studied in this work are: epoxysilane SAMs, octadecyltricholosilane (OST), multi-layers composed of epoxysilane SAMs, poly〔styrene-b-(ethylene-co-butylene)-b-styrene〕(SEBS) and compound of epoxy resin and poly (paraphenylene) (EP/PPP). The pull-off forces of these films were also obtained from force-distance curves measured in static mode of operation of atomic force microscope (AFM). Tribological tests were conducted with a ball-on-flat reciprocating friction tester. The OST showed the lowest pull-off force, indicating its low adhesion property. It was revealed that, the OST, EP/PPP and the multi-layer of epoxysilane SAMs, SEBS and EP/PPP exhibited good tribological properties at the lower load (0.3 N) whereas the OST showed best performance at the higher load (1.8 N).

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2000년도 제13회 춘계학술대회 및 임시총회 학술발표 논문집
• /
• pp.340-345
• /
• 2000

본 논문에서는 대용량 통신처리시스템의 트래픽 처리 능력 예측을 위해 실제 네트워크 구축 상황과 서비스 상황을 모의로 만들어 줄 수 있는 테스터 소프트웨어 개발을 목적으로, 리눅스환경에서 Network Traffic Generator, Remote노드에 사용될 패킷 귀한 프로그램, Statistcal Analyzer, GTK+ 라이브러리를 이용한 GUI, Network Traffic Generator와 Statistical Analyzer를 하나의 프로그램 안에서 동시에 동작하도록 하는 Thread 사용 기법이 연구되었다. 이를 이용하여 대용량 통신 처리시스템의 성능 규격의 정확한 확인을 통해 가용 가능한 가입자 노드의 용량을 결정할 수 있으며, 상용현장시험이 가능하고 또한 설치 규격을 제공할 수 있다.

• 한국통신학회논문지
• /
• 제25권4B호
• /
• pp.624-628
• /
• 2000

본 논문에서는 CDMA 단말기의 전기적 성능에 관한 최소의 요구 사항을 명기한 IS-98B의 항목에서 CDMA 파형의 질(Waveform Quality)을 규정하는 항목인 트래픽로(Traffic Rho)가 최소 성능에 만족하지 않을 경우 CDMA 단말기에 나타나는 현상을 분석하고, CDMA단말기 디자인시 단말기 송신부의 IF(Intermediate Frequency)단에서 TX IF SAW FILTER의 매칭회로를 개선하고 송신단 전원인 3.0V -TX를 발생시키는 LDO(Low Dropout Regulator)의 노이즈 발생을 차단하여 트래픽로 문제 해결방법을 제안한다. 제안 방법을 적용한 후의 파형과 적용전의 파형을 HP8924C 와 HP8595E을 이용하여 비교하여 성능을 개선됨을 보였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제31회 춘계학술대회
• /
• pp.173-179
• /
• 2000

The friction and wear characteristics of brake friction materials reinforced with aramid fiber, carbon fiber, glass fiber, and potassium titanate whiskers were investigated using a pad-on-disk type friction tester. In particular, the morphology of rubbing surfaces was carefully investigated to correlate the friction performance and properties of transfer films. The aramid fiber reinforced specimen showed severe oscillation of friction coefficient at low speed and low applied pressure. The carbon fiber reinforced specimen showing better friction stability exhibited uniform and stable transfer film than any other specimens. The glass fiber reinforced specimen showed unstable friction changes at high speed and high-applied pressure and the non-uniform transfer film was observed in both friction material and rotor surface. The potassium titanate whiskers reinforced specimen showed stable coherent transfer film. The wear test exhibited the potassium titanate whiskers reinforced specimen was lowest in wear amount and glass fiber reinforced specimen showed the severe wear.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제24권1호
• /
• pp.7-16
• /
• 2012

To meet the local requirement i.e. the tropical stress of Andhra Pradesh and marginal farmers, twenty four new hybrid combinations were tested in Line x Tester method involving eight newly developed polyvoltine oval lines viz., MSO1, MSO2, MSO3, MSO4, MSO5, MSO6, MSO7 and MSO8 and three bivoltine silkworm breeds viz., APS12, APS45 and APS8 as testers. These hybrids were reared to evaluate their performance. Data for eight economically important metric traits viz., fecundity, cocoon yield per 10,000 larvae by number, cocoon yield per 10,000 larvae by weight, survival rate, cocoon weight, cocoon shell weight, cocoon shell ratio and filament length was recorded. General combining ability (gca), specific combining ability (sca) and heterosis were analyzed. Further, the relative merit of the hybrids for all the traits under study was also assessed adopting Evaluation Index method. Based on combining ability effects, heterosis and evaluation index, five hybrid combinations viz., MSO3 $\times$ APS45, MSO1 $\times$ APS12, MSO7 $\times$ APS8, MSO2 $\times$ APS45 and MSO1 $\times$ APS45 were selected for further evaluation in different seasons.