• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.581-589
• /
• 2003

The variable flotation response ores from different deposits results basically from mineralogical association and their differences. Development of new techniques for analyzing the metallurgical performance of flotation and other concentration processes is demanded even in the treatment of rather simple ores such as porphyry ores. Diagnostic metallurgical analysis can be used to quantify the most possible recovery processes. Several porphyry copper/gold ores around the world were used to examine the responses in flotation, gravity separation and cyanidation in order to define the linkage between the recovery processes for both copper and old values. Laboratory batch flotation, gravity separation and cyanidation tests were carried out on these samples. All results were used to correlate the relative recovery of copper and gold, and to predict the highest possible metal recovery in the system. The metallurgical predictions were made according to the flotation conditions used and gravity separation. The results of various concentration processes on each porphyry ore samples are presented and discussed. All seven samples have shown significantly different gold/copper metallurgy. The grade/recovery relationships of gold and copper in the laboratory batch tests for the best results and the plants are given in the Figures below. The results of laboratory tests show that the copper recoveries converged to about $90\%$, but the gold recoveries were spread over $55-80\%$, except the K S ore. Series of standard cyanidation tests on the flotation concentrate samples and gravity separation using Knelson Separator on heads ores were carried out to cross-link the metallurgy and mineralogy of gold in the porphyry ores.

• Journal of Mechanical Science and Technology
• /
• v.16 no.8
• /
• pp.1144-1153
• /
• 2002

A hybrid performance prediction method is proposed in the present study. A channel diffuser is divided into four subregions: vaneless space, semi-vaneless space, channel, and channel exit region. One-dimensional compressible core flow and boundary layer calculation of each region with an incidence loss model and empirical correlation of residuary pressure recovery coefficient of a channel predict the performance of diffusers. Three channel diffusers are designed and tested for validating the developed prediction method. The pressure distributions from an impeller exit to the channel diffuser exit are measured and discussed for various operating conditions from choke to nearly surge conditions. The strong non-uniform pressure distribution which is caused by impeller-diffuser interaction is obtained over the vaneless and semi-vaneless spaces. The predicted performance shows good agreement with the measured performance of diffusers at a design condition as well as at off-design conditions.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.1 no.2
• /
• pp.64-72
• /
• 2006

The long propagation delay over satellite internet causes degradation of TCP performance in slow start phase. Especially, web traffic performance is greatly reduced by low throughput in slow start phase. To improve web traffic performance, we propose the Dynamic ACK Generation Scheme which generates ACKs and considers sender RTO in PEP (Performance Enhancing Proxy). The Normal ACK generation mechanism improves TCP throughput, and also decreases sender RTO. if PEP stops generating ACKs, TCP performance will be reduced by frequent RTO expiration. To solve this problem, our scheme adjusts RTO using ACK generation interval. And it supports retransmission mechanism for loss recovery in PEP. The results of the performance analysis provide a good evidence to demonstrate the efficiency of our mechanisms over satellite internet.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.4
• /
• pp.357-361
• /
• 2018

Forward osmosis (FO) process has been attracting attention for its potential applications such as industrial wastewater treatment, wastewater reclamation and seawater desalination. Particularly, in terms of fouling reversibility and operating energy consumption, the FO process is assumed to be preferable to the reverse osmosis (RO) process. Despite these advantages, there is a difficulty in the empirical step due to the lack of separation and recovery techniques of the draw solution. Therefore, rather than using FO alone, recent developments of the FO process have adapted a hybrid system without draw solution separation/recovery systems, such as the FO-RO osmotic dilution system. In this study, we investigated the performance of the hollow fiber FO module according to various operating conditions. The change of permeate flow rate according to the flow rates of the draw and feed solutions in the process operation is a factor that increases the permeate flow rate, one of the performance factors in the positive osmosis process. Our results reveal that flow rates of draw and feed solutions affect the membrane performance, such as the water flux and the reverse solute flux. Moreover, use of hydraulic pressure on the feed side was shown to yield slightly higher flux than the case without applied pressure. Thus, optimizing the operating conditions is important in the hollow fiber FO system.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.1
• /
• pp.146-151
• /
• 2013

This paper reveals the performance decrease and recovery of PEMFC when the contaminated fuel gas and air source with sulfur impurities such as hydrogen sulfide and sulfur dioxide were simultaneously introduced to anode and cathode, respectively. Three different GDLs were fabricated with different carbon black and activated carbon to prevent an introduction of sulfur compound impurities into MEA. components. The severity of $SO_2$ and $H_2S$ poisoning was depended on concentrations(3 ppm - 10 ppm) of sulfur impurities. Especially, cell performance degradation rate was rapid when MEA fabricated with CN-2 GDL because it had little porosity on GDL surface. Moreover, the cell performance can be recovered up to 90%-95% only with neat hydrogen and fresh air feeding.. Conclusively, MEA fabricated with porous CN-1 GDL showed the best cell performance and recovery efficiency during exposure to poisoning condition by simultaneous sulfur impurities.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.118-124
• /
• 2017

An air cooling, open cathode type polymer electrolyte membrane fuel cell (PEMFC) has the advantages of system simplification and cost effectiveness. Open cathode PEMFC could suffer from reduced performance due to the membrane dehydration in low humidity of air. Effects of the cathode air flow rate, anode purge interval and long term storage on PEMFC performance were investigated in this work. Fan voltage is an important factor on air cooling PEMFC performance because the cathode air flow rate and stack temperature were controlled by fan voltage. The dead ended anode (DEA) method was applied to increase hydrogen usage. Periodical purge was used to discharge accumulated water and gas. The influence of long term non-operating condition on PEMFC performance degradation due to the membrane dehydration was also studied and the quick recovery method was developed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.432-436
• /
• 2015

This study computationally explored the thermal performance of passively-cooled polymer heat sinks utilizing seawater. Polymer heat sinks are proposed as cooling modules of the cold sides of thermoelectric generators for waste heat recovery. 3-D Computational Fluid Dynamics (CFD) modelling was conducted for a detailed numerical study. Polyphenylene sulfide (PPS) and pyrolytic graphite (PG) were selected for the base materials of polymer heat sinks. The computational study evaluated the performance of the PPS and PG heat sinks at various fin numbers and fin thicknesses. Their performances were compared with those of aluminum (Al) and titanium (Ti) heat sinks. The study results showed that the thermal performance of the PG heat sink was 3~4 times better than that of the Ti heat sink. This might be due mainly to the better heat spreading of the PG heat sink than the Ti heat sink. The effect of the number of fins on the performance of the PG heat sink was dissimilar to the cases of the PPS and Ti heat sinks. This result can be explained by the interrelationships among heat spreading, surface area enhancement, and fluidic resistance incorporating with an increase in the number of fins.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.5
• /
• pp.71-79
• /
• 1995

This paper describes the design and implementation of dryer controller using the dual processor. This system has higher performance of system recovery from the noise than the existing single processor dryer. And in this paper temperature control method of Dryer using on-off fuzzy logic is proposed to improve the overshoot of temperature in dryer. Experimental results shows that the performance of fuzzy controller is better than that of controller based upon on-off control method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.423-428
• /
• 1990

A mixed IP formulation is presented which concurrently routes and sequences the tasks on the MRS, reflecting the flexible characteristics. As a preliminary work for the performance evaluation of the MRS, a two robot system working on independent tasks is studied. Models for three types of the system capable of simple error recovery function are established using queueing model, and performances are evaluated and analysed.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.17 no.1
• /
• pp.52-57
• /
• 2009

One of the error sources for microwave ranging is the instability of the oscillator that drives the microwave signals. Dual one-way ranging (DOWR) minimizes the oscillator effect by combining two one-way carrier phase signals from two transmitter/receiver instrument. The DOWR is first implemented in the GRACE (Gravity Recovery and Climate Experiment) satellites. Direct evaluation of the DOWR is not possible due to its extremely high accuracy. The flight performance of the GRACE DOWR is analyzed by applying several indirect methods. Comparison with the design noise level is discussed.