• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권4호
• /
• pp.1282-1301
• /
• 2015

Traditional infrastructure has been superseded by cloud computing, due to its cost-effective and ubiquitous computing model. Cloud computing not only brings multitude of opportunities, but it also bears some challenges. One of the key challenges it faces is recovery of computing nodes, when an Information Technology (IT) failure occurs. Since cloud computing mainly depends upon its nodes, physical servers, that makes it very crucial to recover a failed node in time and seamlessly, so that the customer gets an expected level of service. Work has already been done in this regard, but it has still proved to be trivial. In this study, we present a Cost-Time aware Genetic scheduling algorithm, referred to as CTaG, not only to globally optimize the performance of the cloud system, but also perform recovery of failed nodes efficiently. While modeling our work, we have particularly taken into account the factors of network bandwidth and customer's monetary cost. We have implemented our algorithm and justify it through extensive simulations and comparison with similar existing studies. The results show performance gain of our work over the others, in some particular scenarios.

• 한국통신학회논문지
• /
• 제27권1B호
• /
• pp.13-23
• /
• 2002

이동 호스트는 무선 통신망의 낮은 대역폭과 호스트들의 이동성, 부족한 저장장치와 배터리 수명 등으로 인하여 결함 발생 가능성이 높다. 이동 호스트의 결함에 효율적으로 대처하기 위한 결함 허용 기법에 관한 연구가 많이 진행되어 왔다. 셀룰라 네트워크에서는 이동 호스트이외에도 이동 호스트를 연결시키는 기지국은 보다 높은 수준의 가용도를 요구하므로 기지국의 결함에 대한 연구도 필수적이다. 본 논문에서는 이동 호스트 결함 복구를 위한 체크포인팅 기법을 기반으로 기지국 결함 복구를 위한 체크포인팅 이중화 기법을 제안하고 성능을 분석하였다. 또한 이동 호스트의 결함 복구를 위해 체크포인트가 존재하는 기지국의 복구를 기다리는 방법과 다른 기지국의 체크포인트를 이용하는 방법의 성능을 비교 분석하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.759-764
• /
• 2001

The separation performance of zigzag air classifier with angle of 90 degrees was studied using narrow size fractions of thin square samples and granular samples. The simulation results of air velocity inside the classifier indicated that the zigzag geometry induces a new pattern consisting of an upward flow and a circulation flow, Experimental results showed that overflow product recovery was described as an integral calculus of normal distribution as a function of dimensionless air velocity ( $V_{A}$ $V_{A50}$), where $V_{A}$ is superficial air velocity and $V_{A50}$ is the $V_{A}$ at the fifty percent recovery. The $V_{A}$ values were predicted using the equations derived from dynamics for a particle dropping in air. A monitoring system that utilizes changes in acoustic signals emitted during the process of air classification was developed to separate PET with desired recovery or grade. The technical feasibility of the on-line monitoring of the PET recovery and grade was demonstrated by measuring relative energy of the signals.signals.als.

• 대한기계학회논문집B
• /
• 제26권3호
• /
• pp.507-514
• /
• 2002

A computation routine, capable of performing thermal design analysis of the triple-pressure bottoming system (heat recovery steam generator and steam turbine) of combined cycle power plants, is developed. It is based on thermal analysis of the heat recovery steam generator and estimation of its size and steam turbine power. It can be applied to various parametric analyses including optimized design calculation. This paper presents analysis results for the effects on the design performance of heat exchanger arrangements at intermediate and high temperature parts as well as steam pressures. Also examined is the effect of steam sources for deaeration on design performance.

• 전기학회논문지
• /
• 제59권7호
• /
• pp.1199-1205
• /
• 2010

The recent power system is required to a large size of facilities and high power technology according to increasing power demand. However, it could lead to spoiling the beauty of city and environment problem. The miniaturized facilities with large capacity such as GIS have been required in recent power system. The GIS(Gas Insulated Substation) using the SF6 insulation gas enables to miniaturize facilities with large capacity with high insulation performance. However, the substation installed GIS has required to new design model which is different from the conventional substation. The TRV(Transient Recovery Voltage) analysis on simple circuit may applied by differential equation. However, in case of relatively complicated system, EMTP(Electro Magnetic Transients Program) mainly has been used to design and simulate for transient analysis. This paper mainly design the 22.9 kV GIS system and analyze the transient recovery voltage of main circuit breaker using EMTP/RV. It also enables to easily design the other substation installed GIS with same maker and voltage level because the proposed GIS model consists of separated modules such as busbar, circuit breaker, bushing, CT, PT etc. Eventually, it contributes to comfortably compare the interrupting performance of circuit breaker and system TRV corresponding to the substation system configuration.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.329-334
• /
• 1998

This work is concerned with the problem of tracking a maneuvering target. In this paper, an error monitoring and recovery method of perception net is utilized to improve tracking performance for a highly maneuvering tar-get. Many researches have been performed in tracking a maneuvering target. The conventional Interacting Multiple Model (IMM) filter is well known as a suboptimal hybrid filter that has been shown to be one of the most cost-effective hybrid state estimation scheme. The subfilters of IMM can be considered as fusing its initial value with new measurements. This approach is also shown in this paper. Perception net based error monitoring and recovery technique, which is a kind of geometric data fusion, makes it possible to monitor errors and to calibrate possible biases involved in sensed data and extracted features. Both detecting a maneuvering target and compensating the estimated state can be achieved by employing the properly implemented error monitoring and recovery technique. The IMM filter which employing the error monitoring and recovery technique shows good tracking performance for a highly maneuvering target as well as it reduces maximum values of estimation errors when maneuvering starts and finishes. The effectiveness of the pro-posed method is validated through simulation by comparing it with the conventional IMM algorithm.

• 한국통신학회논문지
• /
• 제26권11A호
• /
• pp.1864-1871
• /
• 2001

본 논문에서는 Multi-level PAM신호 방식을 사용하는 디지털 통신 시스템에 적합한 새로운 심볼 타이밍 복원알고리즘을 제시한다. 새로이 제안한 심볼 타이밍 복원 방식은 매 심볼 주기마다 다양한 신호레벨로 변하는 표본화된 심볼들의 변화량을 중간 샘플과 결정된 심볼들로 구한 기울기로 보상하여 타이밍 에러 함수를 추출한다. 종래의 심볼 타이밍 복원 방법들은 Multi-level PAM 신호에서는 충분한 성능을 발휘하지 못하였으나, 새로 제안된 방식은 QPSK뿐만 아니라 Multi-level PAM 신호에서도 적용 가능한 방식이다. 제안된 방식의 성능분석을 위하여 유도한 타이밍 에러함수의 분산 및 5-curve에서의 타이밍 에러 특성은 기존의 방식인 Gardner 방식과 Gardner방식을 수정한 방식과 비교한 바 성능이 더 우수함을 분석하였다.

• 한국통신학회논문지
• /
• 제18권4호
• /
• pp.561-571
• /
• 1993

본 논문에서는 새로운 이산 심볼동기(STR) 알고리듬을 제안한다. 최적 추정이론에서 파생된 이 알고리듬은 기존의 알고리듬에 대한 이해와 분석을 바탕으로 장단점을 소화한 것이다. 새로운 알고리듬의 타이밍(timing) detector는 구현이 간단하며 반송파 위상에 독립적으로 동작하므로 Symbol Timing Recovery (STR)의 새로운 추세인 Carrier Recovery(CR)-STR의 연동동작이 가능하다. 한편 새로운 알고리듬에서 비선형소자에 의한 영향도 분석되고 설명되었으며 수치해석과 Monte-Carlo 시뮬레이션으로 기존의 알고리듬과 제안된 알고리듬간의 성능분석을 수행하였다. Gardner 알고리듬과 비교하였을 때 본 알고리듬은 작은 rolloff에서 패턴 지터(Pattern Jitter)에 의한 추적성능이 보다 우수하였다.

• 전기학회논문지
• /
• 제64권10호
• /
• pp.1426-1431
• /
• 2015

Piezoelectric pump can be considered as R-C load and it needs something special driver because the output voltage does not become 0 even though the applied voltage is 0 with common converter. This operating system consists of fly-back converter to increase the input voltage and energy recovery inverter to apply square voltage to the piezoelectric pump. The energy recovery inverter can charge and discharge the energy of capacitive load. In this paper, to enhance performance of the driver, a few elements or circuits are added and modified. To drive the inverter safely, current limit resister is added and adjusted the value to valance the charging and discharging current. In addition, a current limit inductor is added to the input side to limit the input current and enhance the efficiency. Inductor only may make oscillation and another resister is added parallel to the inductor to solve this problem. The converter and inveter are assembled to one board for compactness. The appropriateness is proved with simulation and experiments.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.429-432
• /
• 2002

The existing recovery technique using the logging technique in the client/sewer database system only administers the log as a whole in a server. This contains the logging record transmission cost on the transaction that is executed in each client potentially and increases network traffic. In this paper, the logging technique for redo-only log is suggested, which removes the redundant before-image and supports the client-based logging to eliminate the transmission cost of the logging record. Also, in case of a client crash, redo recovery through a backward client analysis log is performed in a self-recovering way. In case of a server crash, the after-image of the pages which needs recovery through simultaneous backward analysis log is only transmitted and redo recovery is done through the received after-image and backward analysis log. Also, we select the comparing model to estimate the performance about the proposed recovery technique. And we analyzed the redo and recovery time about the change of the number of client and the rate of updating operation.