• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.2
• /
• pp.151-156
• /
• 2013

Hanwoo (Also known as Korean native cattle; Bos taurus coreanae) have been used for transportation and farming for a long time in South Korea. It has been about 30 yrs since Hanwoo improvement began in earnest as beef cattle for meat yield. The purpose of this study was to determine the trend of improvement as well as to estimate genetic parameters of the traits being used for seedstock selection based on the data collected from the past. Hanwoo proven bulls in South Korea are currently selected through performance and progeny tests. National Hanwoo genetic evaluations are implemented with yearling weight (YW), carcass weight (CW), eye muscle area (EMA), backfat thickness (BF) and marbling score (MS). Yearling weights and MS are used for selecting young bulls, and EMA, BF, and MS are used for selecting proven bulls. One individual per testing room was used for performance tests, and five individuals per room for progeny tests. Individuals tested were not allowed to graze pasture, but there was enough space for them to move around in the testing room. Feeds including roughages and minerals were fed ad libitum, and concentrates were provided at the rate of about 1.8% of individual weight. Overall means of the traits were $352.8{\pm}38.56$ kg, $335.09{\pm}44.61$ kg, $77.85{\pm}8.838\;cm^2$, $8.6{\pm}3.7$ mm and $3.293{\pm}1.648$ for YW, CW, EMA, BF and MS. Heritabilities estimated in this study were 0.30, 0.30, 0.42, 0.50 and 0.63 in YW, CW, EMA, BF and MS, respectively, which are similar to results from previous research. Yearling weight was 315.54 kg in 1998, and had increased to 355.06 kg in 2011, resulting in about 40 kg of improvement over 13 yrs. YW and CW have improved remarkably over the past 15 yrs. Breeding values between 1996 and 2000 decreased or did not change much, but have moved in a desirable direction since 2001. These improvements correspond with the substantial increase in use of animal models since the late 1990s in Korea. Hanwoo testing programs have practically contributed to the improvement in aspects of quality and quantity. In sum, the current selection system is good enough to accommodate circumstances where fewer sires are used on many more cows. Although progeny tests take longer and cost more, they seem to be appropriate under the circumstances of the domestic market with its higher requirement for better meat quality. Consequently, accumulative data collection, genetic evaluation model development, revision of selection indices, as well as cooperation among farms, associations, National Agricultural Cooperative Federation, universities, research institutes, and government agencies must be applied to the Hanwoo selection program. All these efforts will assist the domestic market to secure a competitive position against imported beef under Free Trade Agreement trade system and will provide farmers with higher profits as well as the public with a higher quality of beef.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.7
• /
• pp.1038-1047
• /
• 2008

This study aimed at targeting fixed increases in body weight (100 g/wk) by quantitatively regulating energy allowances (ME) in broiler breeders from 5 to 20 wks of age. Four energy regimes were tested: 1. The energy required for maintenance, activity and growth was calculated for 100 g increases in body weight/wk and a measured quantity of grower diet (160 g protein and 2,600 kcal ME/kg) was offered to the control group (ME-100) to achieve the anticipated weight gain. The energy allowances increased with age from 132 to 294 kcal/d. 2. Additionally, three energy regimes were considered, quantitatively reducing ME by 10% (ME-90) or 20% (ME-80) and increasing by10% (ME-110) over the control group. Each test group had 23 replicates5 female chicks housed in cages. The influence of energy regimes and age on growth, nutrient digestibility, carcass attributes, bone parameters and stress was evaluated at 4 wk intervals. Quantitative ME restriction by 10% (119-265 kcal/d) produced an average weight gain of 98.1 g/wk, which was closer to the targeted increase of 100 g/wk, whereas the control group attained it nine days earlier. Restriction of energy by 10 or 20% produced better conversion efficiency of feed, energy and protein and apparent digestibility of protein, Ca and P than 10% excess ME. Energy regimes did not influence eviscerated meat yield, but higher energy allowances (ME-110) significantly increased abdominal fat pad and liver weights and decreased giblet weight, percent muscle protein and tibia ash. Relatively higher stress was recorded in ME-restricted groups, as reflected by wider heterophil and lymphocyte ratios and increased bursa weight. Early age (5-12 wk) significantly influenced bone mineralization, conversion efficiency of feed, energy and protein and apparent digestibility of protein, Ca and P, while later ages (13-20 wk) increased eviscerated meat yield, abdominal fat, tibia weight and muscle protein and reduced stress. Energy regime x age interactions were significant and are discussed. In conclusion, the synthetic broiler line used in our study responded positively to controlled energy feeding during the rearing period. Breeders offered 119-265 kcal/d, a reduction of 10% energy over the control group, were more effective in regulating grower performance than the latter. In addition to energy regimes, age intervals also exhibited significant influence on specific parameters during the grower phase.

• International Journal of Highway Engineering
• /
• v.17 no.4
• /
• pp.11-18
• /
• 2015

PURPOSES: This study aims to evaluate the runoff reduction with permeable pavements using the SWMM analysis. METHODS: In this study, simulations were carried out using two different models, simple and complex, to evaluate the runoff reduction when an impermeable pavement is replaced with a permeable pavement. In the simple model, the target area for the analysis was grouped into four areas by the land use characteristics, using the statistical database. In the complex model, simulation was performed based on the data on the sewer and road network configuration of Yongsan-Gu Bogwang-Dong in Seoul, using the ArcGIS software. A scenario was created to investigate the hydro-performance of the permeable pavement based on the return period, runoff coefficient, and the area of permeable pavement that could be laid within one hour after rainfall. RESULTS : The simple modeling analysis results showed that, when an impervious pavement is replaced with a permeable pavement, the peak discharge reduced from $16.7m^3/s$ to $10.4m^3/s$. This represents a reduction of approximately 37.6%. The peak discharge from the whole basin showed a reduction of approximately 11.0%, and the quantity decreased from $52.9m^3/s$ to $47.2m^3/s$. The total flowoff reduced from $43,261m^3$ to $38,551m^3$, i.e., by approximately 10.9%. In the complex model, performed using the ArcGIS interpretation with fewer permeable pavements applicable, the return period and the runoff coefficient increased, and the total flowoff and peak discharge also increased. When the return period was set to 20 years, and a runoff coefficient of 0.05 was applied to all the roads, the total outflow reduced by $5195.7m^3$, and the ratio reduced to 11.7%. When the return period was increased from 20 years to 30 and 100 years, the total outflow reduction decreased from 11.7% to 8.0% and 5.1%, respectively. When a runoff coefficient of 0.5 was applied to all the roads under the return period of 20 years, the total outflow reduction was 10.8%; when the return period was increased to 30 and 100 years, the total outflow reduction decreased to 6.5% and 2.9%, respectively. However, unlike in the simple model, for all the cases in the complex model, the peak discharge reductions were less than 1%. CONCLUSIONS : Being one of the techniques for water circulation and runoff reduction, a high reduction for the small return period rainfall event of penetration was obtained by applying permeable pavements instead of impermeable pavement. With the SWMM analysis results, it was proved that changing to permeable pavement is one of the ways to effectively provide water circulation to various green infrastructure projects, and for stormwater management in urban watersheds.

• Journal of Advanced Marine Engineering and Technology
• /
• v.8 no.1
• /
• pp.17-36
• /
• 1984

Since 1973, the competition on the development of fuel saving type internal combustion engines has become severe by the two times oil shock, and new type engines are reported every several months. Whenever these new type engines are developed, new designs are required and they will be offered in the market after performing the endurance test for a long time. But the engine market is faced with a heavy burden of finance, as the developing of a new engine requires tremendous expenses. For this reason, the computer simulation method has been lately developed to cope with it. The computer simulation method can be available to perform the reasonable research works by the theoretical analysis before carrying out practical experiments. With these processes, the developing expenses are cut down and the period of development is curtailed. The object of this study is the development of simulation computer program for the small naturally aspirated four-stroke diesel engine which is intended to product by the original design of our country. The process of simulation is firstly investigated for the ideal engine cycle, and secondly for the real engine cycle. In the ideal engine cycle, each step of the cycle is simulated by the energy balance according to the first law of thermodynamics, and then the engine performance is calculated. In the real cycle imulation program, the injection rate, the preparation rate and the combustion rate of fuel and the heat transfer through the wall of combustion chamber are considered. In this case, the injection rate is supposed as constant through the crank angle interval of injection and the combustion rate is calculated by the Whitehouse-Way equation and the heat transfer is calculated by the Annand's equation. The simulated values are compared with measured values of the YANMAR NS90(C) engine and Mitsubishi 4D30 engine, and the following conclusions are drawn. 1. The heat loss by the exhaust gas is well agree with each other in the lower load, but the measured value is greater than the calculated value in the higher load. The maximum error rate is about 15% in the full load. 2. The calculated quantity of heat transfer to the cooling water is greater than the measured value. The maximum error rate is about 11.8%. 3. The mean effective pressure, the fuel consumption, the power and the torque are well agree with each other. The maximum error is occurred in the fuel consumption, and its error rate is about 7%. From the above remarks, it may be concluded that the prediction of the engine performance is possibly by using the developed program, although the program needs to reform by adding the simulation of intake and exhaust process and assumping more reliable mechanical efficiency, volumetric efficiency, preparation rate and combustion rate.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.2
• /
• pp.48-53
• /
• 2004

This study is objected to estimate the variation of the coefficient of leachate according to designs in landfill cover systems. Design (a) is the unsanitary landfill cover system with 50 cm soil. But Design (b), (c) are sanitary cover systems which are composed of soil top layer, drainage layer, barrier liner(Design (b): Geomembrane(1.5 mm) and compacted clay liner(30 cm), Design (c) compacted clay liner(45 cm)), gas venting layer. Quantity of leachate estimates Rational Method generally and depend on the coefficient of leachate, on one of the factors in Rational Method largely. The coefficient of leachate is defined as the leachate production ratio result from incident precipitation. To estimate the variation of the coefficient of leachate, the authors use HELP(Hydrologic Evaluation of Landfill Performance) Simulation and Pilot Test. As a result of HELP Simulation, the coefficient of leachate is 0.36∼0.42 in Design (a) and 0.03∼0.15 in Design (b), (c) according to designs in landfill cover systems and quality of barrier liner placement. These numerical values are similar to 0.13 with the coefficient of leachate in Pilot Test.

• Journal of Korea Water Resources Association
• /
• v.45 no.5
• /
• pp.481-493
• /
• 2012

The Uncertainty of drought events can be regarded as supernatural phenomena so that the uncertainty of water supply system will be also uncontrollable. Decision making for water supply system operation must be dealt with in consideration of hydrologic uncertainty conditions. When ultimate small quantity of precipitation or streamflow lasts, water supply system might be impacted as well as stream pollution, aqua- ecosystem degradation, reservoir dry-up and river aesthetic waste etc. In case of being incapable of supplying water owing to continuation of severe drought, it can make the damage very serious beyond our prediction. This study analyzes comprehensively sustained drought impacts on the Han River Basin Water Supply System. Drought scenarios consisted of several sustained times and return periods for 5 sub-watersheds are generated using a stochastic hydrologic time series model. The developed drought scenarios are applied to assess water supply performance at the Paldang Dam. The results show that multi-year drought events reflecting spatial hydrologic diversity need to be examined in order to recognize variation of the unexpected drought impacts.

• Journal of Animal Science and Technology
• /
• v.55 no.5
• /
• pp.443-449
• /
• 2013

To develop a diet for Hanwoo steers during the late fattening phase, three different feeding treatments were investigated: a group fed concentrate and rice straw separately (Formula feed), a group fed TMR during the whole late fattening period (TMR), and a group fed TMR plus concentrate (Formula-TMR). Thirty Hanwoo steers 20 months of age (average body weight = 445 kg) were allotted by a completely randomized design into three treatment groups (ten steers in each group). The impact of these treatments on the performance, carcass traits, and blood composition related to body fat synthesis was assessed. The average dry matter and TDN intake were greater in Formula-TMR compared to other treatments (p<0.05); however, body gain, carcass weight, meat production index, and fat color were not affected by dietary type. Blood characteristics, such as concentrations of retinol, insulin, and leptin were not affected by any of the treatments; however the marbling score of the longisimus muscle was significantly higher in Formula-TMR (p<0.05), which was relatively high in blood leptin concentration. The muscle texture, meat quantity index, and meat quality index were highest in the Formula feed, TMR, and Formula-TMR, respectively (p<0.05).

• Journal of Environmental Impact Assessment
• /
• v.16 no.4
• /
• pp.301-310
• /
• 2007

For the improvement of air quality in the metropolitan area, Korea has enforced the air pollutant emission cap regulation from the 1st of July, 2007, and the companies that intend to install a new or an enlarged facility in the metropolitan area will be restricted. However, the current regulation on permission does not describe a standard of judgement distinctly. In this study, therefore, a method of permission on the installation of a new or an enlarged facility was developed by supplementing the law in force based on the foreign cases. To develop a specific permit regulation and procedure, the developed nations' cases such as US, Canada, EU were reviewed thoroughly. Also, an appropriate method was suggested to apply domestically for a new or an enlarged facility permit within the regulations of the metropolitan special law. The method consists of first, calculating the possible permit quantity from the difference between an estimated annual emission cap and the annual emission provided by the implementation plan in each region. Second, permitting a new or an enlarged facility construction within the difference of the emission between the regional emission cap and the implementation plan in 2014. Third, distributing emissions allowable to each performance year based on the regional emission cap and the implementation plan in 2014. Fourth, making use of the emission difference between the implementation plan and the performance result in each year. Considering the general domestic conditions, the convenience of the permit authority and permitted companies, the most reasonable method was to use the fourth. To enforce the suggested permit method in a more flexible way, parts of the related regulations need to be revised and continuous research and analysis on the results from the implemented system and on foreign cases is necessary to develop this method a suitable system for domestic conditions and to settle the air pollutant emission cap system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.52-57
• /
• 2009

In this study, a simulation program has been developed to predict the performance of energy recovery ventilators fur various indoor and outdoor conditions. In order to get a fundamental data about domestic air condition, the heat recovery ventilator is selected with the product of the wind quantity $250m^3/h$ Japanese M companies which are satisfied at High Efficiency Certification Standards. At the case on which the heat recovery ventilator is established, heating load decreases by 69.1% and cooling load decreases by 59.4% in Seoul, and heating load decreases by 66.4% and cooling load decreases by 59.6% in Pusan. The maximum humidification load of winter or summer time with $0.737{\ell}/h$ or $1.008{\ell}/h$ occurred in March from Kangnung or August from Mokpo respectively. In Southern part region and East Sea of winter time, the condensation or frost on exhaust side dose not occurred on exhaust side, but the area of that outside is occurred. Therefore, the preventive measure from the area except a southern part region and the east coast area must be considered, in order to condense or frost not to occur on exhaustion side in winter.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.10 s.352
• /
• pp.35-45
• /
• 2006

Coordinator is defining so that function as most trust center that is point in security in ZigBee Alliance. Because must do height connection with coordinator in device signing to PAN newly, coordinator has shortcoming that subordinate is revealed to danger directly to Centered and cattish device. When do height connection some device, do not become problem, but if network is huge, coordinator's subordinate shall increase as traffic quantity which happen in coordinator increases. Also, in ZigBee security to link network kina of transmission and mutually certification in ZigBee Alliance standard include, but I do not provide method to deliver master key in each node safely. Because process that transmit master key passes through channel that do not secure, master key has shortcoming that is revealed directly. In this paper, I suggested Parent-Child key establishment algorithm to solve these problem. Proposed algorithm consists of two structures. Master key establishment algorithm and device that sign to PAN newly that can use one-way Hash chain and transmit master key safety are consisted of Parent-Child network key establishment algorithm that do child node and parent node key establishment as can do key establishment efficiently. Method that device proposes in case method that propose in case have master key establishment time was shown better performance $200{\sim}1300ms$ than existing method, and device does not have master key than existing method height connect time about $400{\sim}500ms$ better performance see.