• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.6
• /
• pp.619-627
• /
• 2016

Cells of a PV (photovoltaic) module can suffer defects due to various causes resulting in a loss of power output. As a malfunctioning cell has a higher temperature than adjacent normal cells, it can be easily detected with a thermal infrared sensor. A conventional method of PV cell inspection is to use a hand-held infrared sensor for visual inspection. The main disadvantages of this method, when applied to a large-scale PV power plant, are that it is time-consuming and costly. This paper presents an algorithm for automatically detecting defective PV panels using images captured with a thermal imaging camera from an UAV (unmanned aerial vehicle). The proposed algorithm uses statistical analysis of thermal intensity (surface temperature) characteristics of each PV module to verify the mean intensity and standard deviation of each panel as parameters for fault diagnosis. One of the characteristics of thermal infrared imaging is that the larger the distance between sensor and target, the lower the measured temperature of the object. Consequently, a global detection rule using the mean intensity of all panels in the fault detection algorithm is not applicable. Therefore, a local detection rule was applied to automatically detect defective panels using the mean intensity and standard deviation range of each panel by array. The performance of the proposed algorithm was tested on three sample images; this verified a detection accuracy of defective panels of 97% or higher. In addition, as the proposed algorithm can adjust the range of threshold values for judging malfunction at the array level, the local detection rule is considered better suited for highly sensitive fault detection compared to a global detection rule. In this study, we used a panel area extraction method that we previously developed; fault detection accuracy would be improved if panel area extraction from images was more precise. Furthermore, the proposed algorithm contributes to the development of a maintenance and repair system for large-scale PV power plants, in combination with a geo-referencing algorithm for accurate determination of panel locations using sensor-based orientation parameters and photogrammetry from ground control points.

• Fire Science and Engineering
• /
• v.29 no.6
• /
• pp.40-44
• /
• 2015

National and international standards for curtain wall glass are focused on wind pressure and insulation performance, but disasters such as fires and earthquakes are not considered. Failure of curtain wall glass during a fire in a skyscraper increases the loss of lives and property due to the spread of fire. Therefore, the fire resistance of curtain wall glass should be investigated, and technology to prevent glass failure should be developed to prevent fire damage due to spreading fire. It is important to predict the starting point of cracks and the cause of glass failure to prevent it effectively using the limited water in a skyscraper. In this study, double glazed glass was exposed to a radiator in an experiment performed to analyze the thermal characteristics. The results show that glass that was not directly exposed to high temperature and pressure was broken. To identify this failure case, numerical analysis was performed. Three glass specimens were installed in an ISO 9705 room and exposed to radiation using a radiator, and a thermocouple was used to measure the temperature on the surface of the glass. Widely used double glazed glass was analyzed for weakness to fire.

• Korean Journal of Remote Sensing
• /
• v.34 no.4
• /
• pp.611-624
• /
• 2018

The percentage of moisture content in rice before harvest is crucial to reduce the economic loss in terms of yield, quality and drying cost. This paper discusses the application of artificial neural network (ANN) in developing a reliable prediction model using the low altitude fixed-wing unmanned air vehicle (UAV) based reflectance value of green, red, and NIR and statistical moisture content data. A comparison between the actual statistical data and the predicted data was performed to evaluate the performance of the model. The correlation coefficient (R) is 0.862 and the mean absolute percentage error (MAPE) is 0.914% indicate a very good accuracy of the model to predict the moisture content in rice before harvest. The model predicted values are matched well with the measured values($R^2=0.743$, and Nash-Sutcliffe Efficiency = 0.730). The model results are very promising and show the reliable potential to predict moisture content with the error of prediction less than 7%. This model might be potentially helpful for the rice production system in the field of precision agriculture (PA).

• Journal of Korean Society of Transportation
• /
• v.34 no.2
• /
• pp.191-206
• /
• 2016

Pedestrian performance measurement has generally used the average values of pedestrian volumes and speeds from a sample, although each individual's pedestrian behavior of the sample is mainly affected by his/her socio-economic and physical characteristics. In particular, if such individual characteristics of the sample have wide variations, the average values are hard to be representative. In this respect, this study found that a platoon of pedestrians had a major effect on their pedestrian flows on sidewalks. The more platoons was mixed on pedestrian roads, the lower pedestrian flow rate was. The indexes such as a pedestrian flow rate and an occupancy space are typically calculated by pedestrian volumes in a given period of time regardless of the existence of a platoon. However, it is plausible that a pedestrian speed and a level of pedestrian congestion can be different under the equal amount of pedestrian volumes. Therefore, this study suggested criteria for determining level of service for pedestrian considering platoon effects and confirmed that two places had different pedestrian LOSs because of the platoon effects, even if they showed the same pedestrian flow rate.

• Journal of Animal Science and Technology
• /
• v.54 no.3
• /
• pp.175-183
• /
• 2012

The present study was conducted to investigate the relationships of muscle fiber characteristics to dietary energy density [3.0(Low-E) vs. 3.2 (Med-E) Mcal DE/kg)] and slaughter weight [SW; 110, 125, and 138 kg] in finishing pigs (gilt vs. barrow) using a $2{\times}3{\times}2$ factorial treatment design. Forty-one longissimus dorsi muscle (LM) samples were analyzed histochemically, with growth performance and physicochemical data for the 41 animals and their LM out of 192 animals and 72 LM used in a previous study retrospectively included. The ADG was less (P<0.01) in the Low-E than in the Med-E group (0.93 vs. 0.73 kg) whereas lightness ($L^*$) and redness ($a^*$) of LM were greater in the Low-E group SW did not influence these variables. The diameter and perimeter of the type I (slow-oxidative), type IIA (fast oxido-glycolytic) and type IIB (fast glycolytic) fibers increased with increasing SW whereas densities of the fibers decreased. However, the number and area percentages of the fiber types were not influenced by SW or dietary energy density. The percentage and per-$mm^2$ density of type IIB fibers were negatively correlated with SW (r = -0.33 and -0.57, with P<0.05 and <0.01, respectively), whereas type I fiber number percentage was positively correlated with SW (r = 0.31; P<0.05). Marbling score was negatively correlated (P<0.05) with type I (r = -0.36) and type IIB (r = -0.39) fiber densities. The $a^*$ was correlated (P<0.01) with both type I and type IIB fiber number percentages in the opposite way (r = 0.42 and -0.47, respectively). However, $L^*$ (lightness), drip loss and $pH_{24h}$ were not correlated with the fiber number percentage or density of any fiber type. Collectively, results indicate that muscle fibers grow by hypertrophy during the late finishing period, but that fiber characteristics other than the size are not significantly influenced by dietary energy density or SW.

• Journal of Biosystems Engineering
• /
• v.37 no.6
• /
• pp.420-428
• /
• 2012

Purpose: Porcine proliferative enteropathy(PPE), caused by the obligate intracellular bacterium Lawsonia intracellularis, is a widely distributed disease throughout the world causing substantial economic loss. The bacterial pathogen invades the intestinal epithelial cells which causes hyperplasia of the infected cells and leads to the process of disease pathogenesis. For diagnosing PPE in a pig farm in earlier stage, a rapid diagnosing test equipment is needed for farmers. To test the equipment appropriately, we prepare the samples and antibodies for rapid detecting the Lawsonia intracellularis in pig feces. Methods : To prepare the PPE infected samples, we sampled PPE suspected pig feces in a pig farm. To manufacture a anti-Lawsonia intracellularis antibody for capturing the Lawsonia intracellularis, the rabbit-anti LsaA synthetic peptide polyclonal antibody was inoculated to rabbits. To select the couple of antibodies which is most well sandwiched with the bacteria, ELISA test was done with PPE infected ileum samples. Finally, to verify the PPE infected feces which would be used to test the rapid kit, PCR test was done on the sampled PPE suspected feces Results : The rabbit-anti LsaA synthetic peptide polyclonal antibody is developed, and is verified to capture the bacterial well through the fluorescence antibody test. Also, we found that the monoclonal antibody and the polyclonal antibody could be used as couples for sandwiching the bacteria. Finally, through the PCR test for samples of pig feces, we could prepare the 150 PPE positive samples and 50 PPE negative samples. Conclusions : The manufactured polyclonal antibody and the imported monoclonal antibody could be used to capture the bacteria using the sandwich techniques. Also, the prepared PPE infected negative and positive samples could be used to test the performance of the rapid kit to capture the bacterium Lawsonia intracellularis.

• Clinics in Shoulder and Elbow
• /
• v.8 no.2
• /
• pp.97-104
• /
• 2005

Purpose: To report the results of surgical treatment of comminuted fractures of distal humerus and to identify factors that affect the results. Materials and Methods: Thirty-two patients who were treated with open reduction and internal fixation for comminuted fracture of distal humerus were enrolled. According to the AO classification, A2.3 was 1 case, A3.2, 2 cases, A3.3, 8 cases, B1.3, 1 case, B2.3, 1 case, C2.2, 5 cases, C2.3, 4 cases, C3.2, 3 cases and C3.3, 7 cases. As fixation technique, 17 cases were fixed by double plates, 4 cases by only K-wires, 4 cases by only screws, 3 cases by K-wires and screws and 4 cases by one plate and screws. The mean age at the time of the operation was 49 years(range, $19{\sim}77$ years). The mean follow-up period was 16 months(range, $8{\sim}51$ months). Results: At the last follow-up, the mean maximum flexion was $116.4^{\circ}\;(range,\;85{\sim}140^{\circ})$ and the mean loss of terminal extension was $11.8^{\circ}\;(range,\;0{\sim}40^{\circ})$. The average Mayo elbow performance score was $91.4^{\circ}\;(range,\;55{\sim}100^{\circ})$. Overall 29 cases(91%) showed good to excellent results. The mean range of motion of extraarticular and intraarticular fracture group was $105.5^{\circ}\;(range,\;65{\sim}140^{\circ})$ and $104^{\circ}\;(range,\;55{\sim}140^{\circ})$, respectively. The average elbow score of both groups was$93^{\circ}\;(range,\;70{\sim}100^{\circ})$ and $90.7^{\circ}\;(range,\;55{\sim}100^{\circ})$. Over 90% showed more than good results. 30 cases(94%) showed complete bony union but two cases, nonunion. One case of the nonunion cases underwent replating with bone graft as revision surgery and total elbow arthroplasty was performed in the other case. At the last follow-up, 27 patients(84.4%) showed subjective satisfaction. Conclusion: Open reduction and internal fixation with appropriate surgical technique for comminuted fractures of distal humerus showed good results, which were not affected by age at the time of operation, fixation methods and anterior transposition of the ulnar nerve. Transolecranon approach may be considered as good choice for intraarticular comminuted fractures of distal humerus.

• Korean Journal of Clinical Laboratory Science
• /
• v.52 no.1
• /
• pp.1-17
• /
• 2020

Three-dimensional microscopic approaches in histopathology display multiplex properties that present puzzling questions for specimens as related to their comprehensive volumetric information. This information includes spatial distribution of molecules, three-dimensional co-localization, structural formation and whole data set that cannot be determined by two-dimensional section slides due to the inevitable loss of spatial information. Advancement of optical instruments such as two-photon microscopy and high performance objectives with motorized correction collars have narrowed the gap between optical theories and the actual reality of deep tissue imaging. However, the benefits gained by a prolonged working distance, two-photon laser and optimized beam alignment are inevitably diminished because of the light scattering phenomenon that is deeply related to the refractive index mismatch between each cellular component and the surrounding medium. From the first approaches with simple crude refractive index matching techniques to the recent cutting-edge integrated tissue clearing methods, an achievement of transparency without morphological denaturation and eradication of natural and fixation-induced nonspecific autofluorescence out of real signal are key factors to determine the perfection of tissue clearing and the immunofluorescent staining for high contrast images. When performing integrated laboratory workflow of tissue for processing frozen and formalin-fixed tissues, clear lipid-exchanged acrylamide-hybridized rigid imaging/immunostaining/in situ hybridization-compatible tissue hydrogel (CLARITY), an equipment-based tissue clearing method, is compatible with routine procedures in a histopathology laboratory.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1797-1806
• /
• 1998

Future satellite communication systems will be developed at Ka-band (20/30 GHz) owing to the relatively wide frequency allocation and current freedom from terrestrial interference for multimedia services. A serious disadvantage of the Ka-band, however, is the very high atmospheric attenuation in rainy weather. Synchronous CDMA drastically redces the effect of self-noise with several interesting features of CDMA for mobile communications such as fixible freuqncy rese, the capability of performin soft-handover and a lower sensitivity to interference. This paper evaluates the performance of a synchronous CDMA reture link for a Ka-band geostationary satellite communication system. For a fixed satellite channel whose characteristics depend on weather conditions, the signal envelope and phase for this channel is modelled as Gaussian. The bit error and outage probability, and the detection loss due to imperfect chip timing synchronization is analytically evaluated and the system capacity degaradation due to the weather condition is estimated. The two cases consist of the general case in which all users are affected by rain condition, and the worst case in which the reference user is only affected by rain attenuation. the results for two cases of rain condition clearly show that synchronous CDMA eases the power control requirements and has less sensitivity to imperfect power control.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.8
• /
• pp.1310-1322
• /
• 2020

Objective: The current study was conducted to evaluate the quality and profile of fatty acid in the breast and thigh, and the performance of broilers fed diets containing seed or oil of chia (Salvia hispanica L.) as a replacement for soybean, in the rearing period from 29 to 42 days of age. Methods: On the 29th day of age, 120 broilers were distributed in four treatments evaluated in five replicates of six birds. The grain or oil of soybean was respectively replaced on a weight-to-weight basis in the formulation by the seed or oil of chia, constituting the experimental diets. The roasted whole soybean and chia seed were included in the feed at 16.4%, whereas the soybean and chia oils were included at 2.5%. Results: The dietary chia oil increased the lipid peroxidation in the thigh meat, and the dietary chia seed increased the cooking loss of the thigh. However, for the other physicochemical parameters evaluated and for the proximate composition of the breast and thigh, in general, the inclusion of chia seed or oil in the diet provided similar or better results than those observed when the diets contained soybean oil or roasted whole soybean. With regard to the fatty acid profile and associated parameters, dietary chia increased the concentrations of α-linolenic, eicosapentaenoic, and docosahexaenoic acids and reduced the Σω-6:Σω-3 ratio and the atherogenicity and thrombogenicity indices of the broiler meat. However, the dietary chia seed worsened the feed conversion ratio. Conclusion: Diet containing 2.5% chia oil supplied to broilers during the period from 29 to 42 days of age improves the feed conversion ratio, increases the deposition of the ω-3 fatty acids in the breast and thigh, in addition to reducing the Σω-6:Σω-3 ratio and the atherogenicity and thrombogenicity indices, thereby resulting in meat with higher nutritional quality.