• Korean journal of food and cookery science
• /
• v.29 no.1
• /
• pp.63-71
• /
• 2013

The purpose of this study was to analyze the gap between importance and performance in perceived sanitation management for general hospital foodservice operations. Data were collected through surveys given to 168 hospital dietitians in the Seoul-Incheon, Gyeonggi-do, Daegu, and North Gyeongsang province. The 65 questionnaires from total questionnaires were usable and the response rate was 38.7%. All statistical analyses were conducted using the SPSS package program (version 20.0) for t-test, ANOVA, and importance-performance analysis (IPA). According to the importance and performance analysis for 26 items, the importance score was significantly higher than the performance score for 22 items. In addition, the results of IPA showed the following areas as improvement priorities: handling foods on working table and management of distribution temperature. In conclusion, the performance level of prerequisite programs applying to the hospital foodservice needs improvement, especially cross-contamination prevention and temperature control for distribution. Additionally dietitians should be educated about sanitation management items that perceived to be less important than the others.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.317-320
• /
• 2004

In this paper, it is analyzed a performance improvement of ACL Packet using turbo code scheme in bluetooth system. In order for segment to improve the transfer capability, the transmission of messages have been simulated using a fragmentation that begins with the total package and incremental fragmentation for each layer using the TCP to define the resultant packet size and the level of fragmentation for each proceeding layer. This turbo code scheme decreases transmission time of L2CAP baseband packets by sending packets. From the results, we were able to obtain packet transmission time, optimal TCP packet size, ACL(DM packet) in AWGN.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.3
• /
• pp.31-35
• /
• 2013

TSOP(Thin Small Outline Package) is the IC package using lead frame, which is the type of low cost package for white electronics, auto mobile, desktop PC, and so on. Its performance is not excellent compared to BGA or flip-chip CSP, but it has been used mostly because of low price of TSOP package. However, it has been issued in TSOP package that thermal deflection of lead frame occurs frequently during molding process and Au wire between semiconductor die and pad is debonded. It has been required to solve this problem through substituting materials with low CTE and improving structure of lead frame. We focused on developing the lead frame structure having thermal stability, which was carried out by numerical analysis in this study. Thermal deflection of lead frame in TSOP package was simulated with positions of anti-deflection adhesives, which was ranging 198 um~366 um from semiconductor die. It was definitely understood that thermal deflection of TSOP package with anti-deflection adhesives was improved as 30.738 um in the case of inside(198 um), which was compared to that of the conventional TSOP package. This result is caused by that the anti-deflection adhesives is contributed to restrict thermal expansion of lead frame. Therefore, it is expected that the anti-deflection adhesives can be applied to lead frame packages and enhance their thermal deflection without any change of substitutive materials with low CTE.

• Korean Journal of Community Nutrition
• /
• v.5 no.3
• /
• pp.522-528
• /
• 2000

The purpose of this study was to provide basic reference materials for improving the quality of the military foodservice so that they can satisfy the customers needs. The questionnaires employed in this study were developed based on the IPA(Importance Performance Analysis). The questionnaires for the military customers(Group A which is the smaller size then Group B which is larger in size ; a criteria for the classification is the number of soldiers served in the foodservice facilities) consist of demographic variables, concerns about the military foodservice, and service practices. A total of 656 military customers answered the questionnaires. A statistical data analysis was conducted using the SPSS/win package program for descriptive analysis, a $\chi$$^2$-test and t-test. The results of this study could be summarized as follows : The IPA in case of Group A showed the following attributes in Quadrant A(\"focus here\") : (1) availability of the meals that the customers prefer, (4) taste of the food, (16) cooking methods that the customers prefer, (17) the overall quality of the breakfast. The IPA in case of Group B showed the following attributes in Quadrant A(\"focus here\") : (11) cleanliness, (12) kindness of the foodservice personnel, (15) the overall quality of the service, (17) the overall quality of the breakfast. The opinion of the Group A on the improvement of military foodservice was significantly different from that of Group B in the areas of meals/service improvement, problems in military foodservice, improvement in service methods, etc.(p < 0.05).ods, etc.(p < 0.05).

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.467-470
• /
• 2005

There are about 10 motors for tile actuator of the automation system in an auto-mobile recently. The performance of the motor-case is much related to the noise and the vibration of an auto-mobile Multi-Forming process is so much the better than existing deep-drawing or Multi-step forming by press by less cost, installation and staff. But there isn't the specific and general process design, so we aren't good at competition. So in the first step, I want to study about the core design for the multi-forming process. We can access by the elasto-plastic theory and the finite element method, and we use a commercial package of the Deform-2D and, Deform-3D which is based on three-dimensional elasto-plastic finite element, evaluated propriety oi the package. The evaluation of the package propriety was simulated by simple bending example. It was found the elasto-plastic theory was mostly in agreement with the simulation. We proposed that three type of section for the core and analyzed by finite element method (Deform-2D). We can get the best result with the ellipse type core. Then we apply the result of the preceding analysis to the finite element method (Deform-3D). In 3D-finite element analysis, we can get the result of 8/100mm-roundness. This result can help the improvement of the multi-forming process.

• 한국경영정보학회:학술대회논문집
• /
• 2007.06a
• /
• pp.582-587
• /
• 2007

ERP system is a good one because it provides required data to the Board of Directors at the right time, but needs to collect many data in this system. Nevertheless, increase in data leads to the system's quality deterioration which makes companies to carry out quality improvement. In order to solve quality deterioration problem, a company's quality improvement director must execute under acknowledgement of the relationships between sectors to be improved, which are DBMS, Application, System, Data Management, Archiving, and Reorganization. But in many cases, these relationships are ignored due to massive size of each of the sectors, resulting fragmental quality improvement operation. This case paper proposes a solution to effectively solve quality deterioration problem created by the massive data produced while operating ERP System(constructed by SAP package and web). First, it defines the sectors where quality improvements are vital, and lists out things to be considered. Then, by analysing the working process of these sectors, proposes the most efficient order of the improvement process. This case will eventually help the company's quality improvement director to execute quality improvement most effectively without trials and errors, which is this paper's ultimate goal.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.5
• /
• pp.32-40
• /
• 2017

Korean construction industry is facing downtime mood and need more productivity. In order to successfully accomplish the construction project with more productivity, systematic and reasonable schedule management techniques should be developed and utilized. Therefore, in this study, first, a current status of the schedule management in the construction site is identified and the improvements in the schedule management are suggested. And, the effective schedule management technique in the construction site is proposed based on the in-site experience of the researcher. In order to find solutions, survey questionnaires designed to measure the understanding of process management and measure perception of the importance of schedule management. Total twenty nine field engineers who are performing schedule management of construction project at domestic civil engineering construction site were participated in the survey, and In-depth interviews were conducted. Eleven construction sites are inspected. Finally, a simple and effective schedule management technique including from WSB classification to schedule analysis, performance management, and performance improvement is proposed based on the inspection of current status of schedule management in civil engineering construction site.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.9
• /
• pp.622-629
• /
• 2007

Compact semi-center type automotive air handling system(AHS) is developed in this study and it's performance is compared with the conventional 3-pieces type air hand-ling system. The pressure drop is measured at component level and system level, and air flow rate and air distribution of discharge air through each ducts from air handling system are measured. System level characteristics of pressure drop at face and windshield discharge mode and air flow rate are investigated, and also temperature control linearities are tested. The volume of the air handling system package is reduced about 20%. And air flow rate increase about 5 to 20% compared to the conventional 3-pieces type air handling system at each discharge mode with significantly improved air pressure drop both component and system level. Also, air distribution and temperature controllability meet to evaluation criteria.

• International Journal of Aerospace System Engineering
• /
• v.1 no.1
• /
• pp.44-47
• /
• 2014

This study proposes a development for the nano silver adhesive, which is applicable to high efficiency LED(light-emitting diode) light. The important issue of LED light is heat exhaust from LED. Generally, the middle area of LED light is increased up to 380K. Therefore, the bottleneck between LED chip and heat sink are caused by high temperature. In this work, the adhesive material between LED Chip and heat sink was newly developed for improvement of bottleneck. The nano silver was adopted to solve heat problem of chip on board package for LED light. In order to evaluate the performance of the nano silver adhesive, the thermal analysis was performed. Moreover both adhesive performance and heat exhaust were verified through the prototype test. From the experimental test results, it is found that the developed nano silver adhesive has the high performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.4
• /
• pp.126-135
• /
• 1989

In this study, in order to perform dynamic design of machine tools reasonably and effectively, a method was formulated to be applicable to the structures connected by joints having elasticity and damping by using substructure synthesis method. And to analyze chatter-free performance, a 3 dimensional cutting dynamics theory was used. Computer program package for the dynamic design of machine tools was developed by combining those and spplied to improvement of performance of NC lathe. Also, the optimization in the structural modifications of machine tool substructure was studied by evaluating the effects of the substructural modifications on total system performance.