• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.3
• /
• pp.156-163
• /
• 2013

Ground Source Heat Pump (GSHP) systems utilize geothermal energy as a thermal source or sink, for heating, cooling and domestic hot water. It is well known that GSHP is environmentally friendly, and saves energy dramatically. For this reason, many investigative researches have been conducted on commercial and governmental buildings. However, studies on residential GSHP are few, because of the small capacity and cost. In this study, we experimented with the characteristic performance of heating, cooling and seasonal performance factor for a residential GSHP system, which consisted of two 180 m deep u-tube ground heat exchangers, a heat pump and measurement instruments. The installed capacity of the heat pump was 5RT, and the conditioning area was $62.23m^2$. From the experimental results, the cooling COP of the heat pump was 4.13, and the system COP was 3.51, while the CSPF was 3.32. On the other hand, the heating COP of the heat pump was 3.87, and the system COP was 3.39, while the HSPF was 3.39. Also, in-situ cooling COP and capacity were 93.7% and 96.4% compared with the EWT certification data, respectively, and that of heating were 98.3% and 95.7%, respectively.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.11
• /
• pp.63-72
• /
• 2018

In this study, we analyzed high-performance building technologies through a case study of 65 high-performance buildings in the U.S., Europe, Asia and Oceania. In detail, we reviewed the international trend of building energy-saving technology and energy consumption per unit area by analyzing buildings constructed within a 10 year period(2008-018). The primary energy consumption was $48-440kWh/m^2$, and the average value was calculated as $169.3kWh/m^2$. Although some buildings received high certification ratings, they did not meet either Korean or international energy evaluation standards. The system analysis revealed that many energy-saving technologies show various application rates in different countries because the technologies possess different properties. Furthermore, small-area building groups tended to have less primary energy consumption than the medium and large-area buildings, but the area-energy relationship $R^2$ value was analyzed as 0.3161, indicating no clear proportional relationship. Therefore, we propose that it is necessary to maximize the energy savings of buildings by taking into consideration a region's code, climate, building usage, area and space-using patterns to reduce energy and greenhouse gas emissions.

• Journal of Navigation and Port Research
• /
• v.47 no.6
• /
• pp.386-393
• /
• 2023

Recently, the demand for autonomous navigation technology has increased, and related research is also increasing. Autonomous ships generally follow the planned route, calculate the avoidance route according to the risk situation while sailing, and follow a calculated route. In general, an automatic steering device is used to follow the route, and among the operational automatic steering device methods, the route control mode is the most appropriate method to apply to autonomous ships. Therefore, in this study, we developed a route-tracking algorithm to apply an avoidance route using the navigation control mode of an automatic steering device. The algorithm was developed by dividing the straight and turning sections. A performance test was conducted to satisfy the performance suggested by IEC 62065, the relevant international standard, using simulator equipment that had acquired international certification to verify its performance. The results of the performance verification confirmed that the cross-track error, which represents the straight distance between the ship and the route, satisfied the performance standards suggested by IEC 62065 when the ship followed the route.

• 한국벤처창업학회:학술대회논문집
• /
• 2018.11a
• /
• pp.165-175
• /
• 2018

Since the 1997 financial crisis, large scale unemployment and poverty have become serious, and public and social job creation projects have been carried out. However, with the limitations of low-wage and short-term jobs, the need for long-term and high quality jobs gradually began to attract attention. In recent years, social enterprises have grown both quantitatively and qualitatively and interest in social enterprises has increased. And also it is interested in the determinants of success and failure of social enterprises in the academic field. In this study, we examined the effects of social enterprise characteristics on financial and social performance, and we analyzed empirically by using social enterprises registered in the Korea Social Enterprise Agency. The financial performance of the social enterprise is measured by the net income ratio, operating income ratio, and the return on asset. The social performance of the social enterprise is measured by total number of workers and the employment rate of the vulnerable social groups. The characteristics of the social enterprise include the CEO characteristics (gender, age, experience in operating the social enterprise), the firm size, and the elapsed time of the authentication. The results of the empirical analysis are as follows. First, as a result of analysis for the effect on financial performance, we found that the financial performance have a statistically significant positive relationship with firm size, organizational form, government subsidies and capital adequacy ratio. And it is found that the social performance have a statistically significant negative relationship with CEO age, credit debt dependence. Second, as a result of analysis for the effect on social performance, we foumd that total number of workers have a significant positive relationships with CEO gender, CEO age, and firm size, government subsidies, while total number of workers have a significant negative relationship with certification type and industry dummy. On the other hand, the employment rate of the vulnerable social groups have a siginificant positive relationship with CEO gender and certification type and It have not statistically significant relationship with the government subsidies and the firm size.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.2
• /
• pp.61-72
• /
• 2019

Since the financial crisis in 1997, large scale unemployment and poverty have become serious, but there has been a surge in public and social job creation projects. However, with the limitations of low-wage and short-term jobs, the need for long-term, high quality jobs gradually began to garner attention. In recent years, social enterprises have grown both quantitatively and qualitatively and interest in social enterprises has increased; more specifically, scholars are interested in the determinants of success and failure of social enterprises in the academic field. In this study, we examined the effects of social enterprise characteristics on financial and social performance. In particular, we empirically analyzed social enterprises registered in the Korea Social Enterprise Agency. The financial performance of the social enterprise was measured using the net income ratio, operating income ratio, and the return on asset. The social performance of the social enterprise was measured by the total number of workers and the employment rate of vulnerable social groups. The characteristics of the social enterprise included CEO characteristics (gender, age, experience in operating the social enterprise), firm size, and the elapsed time of authentication. The results of the empirical analysis are as follows. First, as a result of analysis for the effect on financial performance, we found that the financial performance has a statistically significant, positive relationship with firm size, organizational form, government subsidies, and capital adequacy ratio. And we found that the social performance has a statistically significant, negative relationship with CEO age and credit debt dependence. Second, as a result of analysis for the effect on social performance, we found that the total number of workers had a significant, positive relationship with CEO gender and CEO age, as well as firm size, government subsidies; whereas the total number of workers had a significant, negative relationship with certification type and industry dummy. Comparatively, the employment rate of the vulnerable social groups had a significant, positive relationship with CEO gender and certification type, but there was no statistically significant relationship with the government subsidies or firm size.

• Journal of Convergence Society for SMB
• /
• v.2 no.2
• /
• pp.21-26
• /
• 2012

This paper analyzes business performance that together influence firms to adopt IMS, which is the standard primarily concerned with an IMS. We predict that the firm's financial characteristics will also influence the IMS adoption in our analses. This study tests three hypotheses on management performance of adoption of IMS. The main findings are as follows. The first hypotheses is supported in terms of debt ratio, fixed assets to net worth and fixed liabilities, net sales groth rate respectively at the 1%, 5%, and 5% significance level. The second hypotheses is supportrf in terms of gross margin on sales and total assets turnover at the respective rates of 1% and 10% significance level. The third hypotheses is supported in terms of current ratio, debt ratiom fixed assets to net worth and fixed liabilities at the respective rates of 10% and 1% significance level.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.111-117
• /
• 2017

The National Competency Standards (NCS) was designed to implement a competence-based society and solve the problem of inconsistency between the industrial field and education, training, and certification system. This study designed and developed the Korean NCS core vocational competence system, in accordance with the NCS, as an infrastructure to solve fundamental problems such as re-education and the social costs that are incurred in the workplace. Further, this study designed and developed standard indicators to evaluate the technical performance of the system for the global advancement of the Korean NCS core vocational competence system. The NCS core vocational competence system has been developed as an appropriate response type for multiple devices such as computers, tablet PCs, and cellular phones. For the global advancement of the Korean NCS core vocational competence system, this study designed and developed 10 performance evaluation indicators in accordance with 10 global standards, such as linkage-target operating system, interface protocol, packet format, encryption, class component, simultaneous access number, supervisor-to-testtaker response speed, server-to-admin response speed, auto-recovery speed for test answers, and real-time answer transmission speed.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.3
• /
• pp.172-182
• /
• 2013

In this study we consider a flow line CONWIP system in which two types of product are produced. The processing times of each product type at each station follow an independent exponential distribution and the demands for the finished products of each type arrive according to a Poisson process. The demands that are not satisfied instantaneously are either backordered or lost according to the number of unsatisfied demands that exist at their arrival instants. For this system we develop an approximation method to obtain the performance measures such as steady state probabilities of the number of parts of each product type at each station, mean waiting times of backordered demands and the proportion of backordered demands. For the analysis of the proposed CONWIP system, we model the CONWIP system as a two class closed queueing network with a synchronization station and analyze the closed queueing network using a product-form approximation method for multiple classes developed by Baynat and Dallery. In the approximation method, each subsystem is analyzed using a matrix geometric method. Comparisons with simulation show that the approximation method provides fairly good results for all performance measures.

• Journal of the Korean Institute of Gas
• /
• v.25 no.6
• /
• pp.66-73
• /
• 2021

In this study, The full load test and WHTC mode test were performed to examine the effect on a heavy duty natural gas engine according to the type of standard gas for certification to check engine performance and exhaust characteristics. Two types of standard gas (G_r, G₂₃) and commercially available natural gas were applied as the fuel used. As a result of the test results of three natural gases with different fuel compositions, G₂₃ with a high nitrogen content was inferior in torque, fuel consumption, and thermal efficiency conditions. In addition, when evaluated in the WHTC mode it was possible to obtain a result that satisfies the EURO VI regulation. However, compared to the other two fuels, the emission characteristics of G₂₃ decreased CO2 and CO, but increased CH4, NOx and PN emissions.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.398-408
• /
• 2023

This work developed a hood and filter for antibacterial protective clothing for medical powered air purifying respirators (PAPR) that can be used in medical settings and quarantine against infectious diseases such as Zika virus, Middle East respiratory syndrome (MERS), and coronavirus disease-19 (COVID-19). The hood material of the protective clothing was made of polypropylene spunlace nonwoven fabric (SFS) was used for withstand wind pressure and external physcial pressure. Forthermore, in order to reduce the user's risk of infection, phytoncide-based materials were used on the outer-surface of the hood to achieve a 99.9% antibacterial effect, and the inner-surface were treated with hydro-philic materials to improve absorbency by 25%. In addition to evaluating the artificial blood penetration resistance, dry mi-croorganism penetration resistance, wet bacteria penetration resistance, and bacteriophage penetration resistance required for medical protective clothing hoods, it received a passing evaluation of levels 2-6. Meanwhile, as a result of evaluating the performance of the antibacterial treated spunlace high efficiency particulate air (HEPA) filter, excellent antibacterial properties, dust removal rate, and differential pressure effect were confirmed. All performance evaluations were conducted by an accredited certification body in accordance with the medical PAPR certification standards.