• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.286-292
• /
• 2014

This paper presents the parameters optimization technology for generating the first short stroke lightning current waveform($10/350{\mu}s$) which is necessary for the performance tests of components of lightning protection systems, as required under IEC 62305 and the newly amended IEC 62561. The circuit using the crowbar device specified in IEC 62305 was applied to generate the lightning current waveform. To find the proper parameters of the circuit is not easy because the circuit consists of two parts; circuit I, which relates to the front of current waveform, and circuit II, which relates to the tail. A simulation in PSpise was carried out to find main factors related to the front and tail of $10/350{\mu}s$. The lightning current generator was developed by utilizing the circuit parameters found in the simulation. In the result of experiments, new parameters of the circuits need to be changed because of the difference between the simulation and the experiment results. Using the iterative method, the optimized parameters of the circuits was determined. Also a multistage-type external coil and a damping resistor were proposed to make the efficiency of generation to enhance. According to the result in this paper, an optimized first short stroke lightning current waveform was obtained.

• Journal of Korean Society for Quality Management
• /
• v.38 no.2
• /
• pp.261-275
• /
• 2010

The purpose of this study is to empirically analyze the productivity change of the 10 Single PPM Certification Company in the 3 Industry(Electronics, Motor-Parts, Machines). In this study, Productivity change over the time in Korean small and medium sized firms in the 3 industries by the bootstrapped Malmquist Productivity Index(MPI). The traditional Malmquist Productivity Index(MPI) and Data Envelopment Analysis(DEA) Models have not only bias but also lack statistical confidence intervals. they could lead to wrong evaluations of the efficiency and productivity scores. In this paper, DEA and a MPI are combined with a bootstrap method in order to provide statistical inferences that analyze the performance of the Single PPM Certification Company. The data cover the period between 2004 and 2007. The result of this paper reveals : 1) The Electronics Industry had productivity effect of 17%, but there was not direct effect for other Industries(Motor-Parts, Machines). 2) average productivity Progress of the 7DMU(Electronics), 1DMU(Motor-Parts) and none(Machines).

• Korean Institute of Interior Design Journal
• /
• v.16 no.4
• /
• pp.47-53
• /
• 2007

As more serious environmental problems of buildings, many researchers have recognized the importance of preserving the environment where we live as well as a necessity of developing architecture with eco-environmentally. As a result, our country and some advanced countries have tried to solve these problems in that developed green building assessment tools for estimating environmental performance of buildings. Among many kinds of buildings, hospital which have been relation with human beings has been laking in basic raw materials of researching hospital's environment. Especially, there are few materials about indoor environment of hospital. So, the facilities of patients not only have to depend on the quality of natural environment but be also taken into account of patients. The purpose of this study is to prepare the basic data to develop the items of indoor environmental assessment for hospital to improve the quality of hospital's indoor environment. To come to a conclusion, we used a method of comparing domestic green building certification criteria, LEED v.2.2 and GBTool 2005. Then, we analyzed them for the case studies. Consequently, we could grasp basic data to assist in effecting domestic green building certification criteria for hopital. Furthermore, we have made a progressive research about setting grades of it.

• Current Industrial and Technological Trends in Aerospace
• /
• v.8 no.1
• /
• pp.131-139
• /
• 2010

Avionics technologies have been developed with a development of an airplane since 1903. Historically, radio communication was started in 1910's, radio navigations in 1920's and autopilot was applied first in 1930's. Glass cockpit was initiate on MD-80 in 1979 first and now spreaded widely and similar with GPS navigation. Avionics in modern aircraft has a great deal of importance in view of flight safety and maintaining comfortableness. As avionics develops, so do the certification technologies. This paper introduces update avionics certification technologies developed recently.

• Journal of Environmental Impact Assessment
• /
• v.28 no.6
• /
• pp.556-567
• /
• 2019

As the number of skyscrapers in micro water grid units such as green building and smart building is increasing in the world, the green building certification system is being implemented to solve problems such as increased demand for water resources and energy. However, researches on the use of sustainable water resources like water reuse and water conservation through linkage and continuous use of water resources, while the power and energy sectors are actively conducting R&D projects in the green building certification system on the micro water grid level. Therefore, this paper analyzes the characteristics and limitations of the water resources sector for the continuous utilization of multiple water sources in the green building certification system, due to the inadequate consideration of sustainability. Then investigates whether various water resources such as constants, nature, and alternative water resources are continuously used in and out of the green building or smart building and complex in the micro water grid unit to suggest evaluation methods and performance evaluation standards.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.2
• /
• pp.101-107
• /
• 2013

It is evident that in the wind energy business as an economic activity there is a close relationship between the wind speed and the revenues. The wind turbine test facility for wind turbine accreditation is intended to be used by the industry for testing of both main components and systems. This paper suggest the wind test site for certification of prototype wind turbine with international regulations. The test site has an environmental permit for wind turbines with a maximum hub height of 120m and a rotor diameter up to 120m, and can accommodate prototypes with installed electrical powers up to 5MW each. A wind turbine manufacturer can lease the location for a period of type certification. And also researchers are the development of new methods for measuring the influence, performance and durability of the components, a mathematical and numerical modelling of component responses by using the site.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.1-8
• /
• 2019

Medical information is an important personal information for patients, and it must be protected. In particular, when medical personnel approach electronic medical records, authentication for enhanced security is essential. However, the existing public certificate-based certification model did not reflect the security characteristics of the electronic medical record(EMR) due to problems such as personal key management and authority delegation. In this study, we propose a fingerprint recognition-based authentication model with enhanced security to solve problems in the approach of the existing electronic medical record system. The proposed authentication model is an EMR system based on fingerprint recognition using PEMS (Private-key Escrow Management Server), which is applied with the private key commission protocol and the private key withdrawal protocol, enabling the problem of personal key management and authority delegation to be resolved at source. The performance experiment of the proposed certification model confirmed that the performance time was improved compared to the existing public certificate-based authentication, and the user's convenience was increased by recognizing fingerprints by replacing the electronic signature password.

• Journal of the Society of Disaster Information
• /
• v.16 no.1
• /
• pp.163-177
• /
• 2020

Purpose: While it is very important to maintain facilities recently, the introduction and its application of high technology in the facility maintenance industry has increased. It is necessary for high technology to secure reliability through the verification and certification system of diagnostic equipment to have an effective impact in the field, but there is difference between the industry's perspective and realistic level of technology apart from social demand for the system of the system. This paper dealt with the introduction of a verification and certification system for rational facility diagnostic equipment with the opinion survey on managers about the current situation. Method: Survey is carried out targeting managers in the maintenance and construction regarding the necessity and urgency of introducing a verification and certification system to promote the introduction and its application of high technology of diagnostic equipment and facility inspection. Also, the introduction to a verification and certification system was reviewed for advanced facility diagnostic equipment through foreign research about similar systems and comparative analysis of similar systems related to the certification of 21 domestic equipment. Result: It showed that, regarding the application of high technology, it is necessary for most managers to introduce high technology such as drones, robots, etc., in the maintenance industry, and when high technology is introduced, it will have a considerable effect in the field. On the other hand, the current technology level in Korea is relatively low, so it turned out to take a certain amount of time for the application of technology. Also, it was found that the management of reliable facility diagnostic equipment will be possible through the introduction of the verification and certification system for facility diagnosis equipment. Meanwhile, the survey is conducted on similar systems about foreign and domestic diagnosis and measuring equipment, etc., but there is no system to verify and certify equipment applied with high technology directly to facility diagnosis maintenance. However, because Japan has a system of verifying the performance of diagnostic equipment and South Korea has 21 similar inspection and diagnostic equipment certification systems among 186 certification systems, it is considered to be possible to design systems which utilize them. Conclusion: According to the managers' opinion, it seems that the introduction of the system supporting the application of 4th industrial technology for the equipment and the use of the equipment with high reliability has sufficient validity. However, because our high technology level is undervalued compared to the urgency, the system for checking high technology facilities and certifying diagnostic equipment should be to be implemented in form of escalation considering technical use and verification level. Apart from the introduction of the verification and certification system, it is necessary for special investment, support and efforts to promote advanced facility diagnostic equipment.

• Magazine of the Korea Concrete Institute
• /
• v.17 no.5 s.88
• /
• pp.69-75
• /
• 2005

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.775-776
• /
• 2012