• 한국생산제조학회지
• /
• 제5권4호
• /
• pp.82-89
• /
• 1996

In this study, to choose the drilling m/c with analysis model for dynamic design of machine tool strctures, are used substucture syntheis method for reduction to degrees of freedom of dynamic model and analysis evaluation of substructures The dynamic factors of substurctures are examined by substructure synthesis method. And that dynamic design of structures for energy balancing are performed. The computer program for calculated of the dynamic and energy distribution analysis was developed. Result of numerical analysis by developed program obtained to conclusion as following. The design of machine tool structures by dynamic avoid the resonances, and are known to considered based on the energy balancing. These methods can be used effectively for the performance evaluation, design modification and improvement of dynamic performance evaluation, design modification and improvement of dynamic performance of machine tools.

• 한국분무공학회지
• /
• 제9권4호
• /
• pp.77-82
• /
• 2004

This paper describes the improvement of engine cooling system. To improve engine cooling performance, the authors approached in two ways. One is to increase water pump performance, changing of impeller shape and lightening of material were carried out. The second one is cooling efficiency rise, which were investigated with head gasket coolant flow passage optimization with flow visualization technique. The test results show that water pump performance was increased effectively, reduction of pump drive torque, and increase of pump flow-rate and pressure rise. Gasket hole pattern optimization test results represent an optimized head coolant flow which stands cross flow from exhaust to intake port side and small vortex were removed.

• 조명전기설비학회논문지
• /
• 제17권1호
• /
• pp.45-53
• /
• 2003

본 연구에서는 프래쉬버트 용접에서의 용접성을 향상시키기 위하여 인버터를 대용량 시스템에 적용하여 타당성을 검증하였다. 제안된 시스템은 풀브릿지 인버터방식을 채택하고, DSP제어기를 사용하였다. 인버터시스템으로 동작 주파수를 향상시키면서 기존의 위상 제어형 용접기의 용접성과 비교하여 스패터가 저감되는 등 용접성이 개선되는 것을 여러 가지 금속학적인 방법들을 이용하여 확인하고, 인버터 시스템의 타당성을 검증하였다.

• 한국통신학회논문지
• /
• 제18권4호
• /
• pp.591-601
• /
• 1993

본 논문에서는 기존 차동 복조기의 k개의 연속적인 출력과 k비트 지연된 차동 복조기 출력간의 관계를 MSK 및 GMSK 시스팀에 대하여 고찰하였다. MSK 및 GMSK 의 신호에 대한 k비트 지연 회로를 사용한, k차 복조기의 출력은 기존 차동 복조기의 k개의 연속적인 출력의 곱이다. 이를 수학적인 과정을 통하여 증명하였으며 이러한 관계를 이용하여 Makrakis가 제시한 2비트 지연기를 사용하여 성능을 개선시킬 수 있는 수신기구조를 임의의 비트 지연기를 사용할 수 있는 수신기 구조를 일반화시켰다. 제안된 방식의 오율 성능을 컴퓨터 시뮬레이션을 행하였으며 성능 개선이 됨을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1483-1485
• /
• 2004

Photovoltaic(PV) technology is a popular part of building vocabulary. It can be used today on both existing and new buildings. Its use in the building envelope is very varied and open ways, such as roofing materials, facades, skylights and shading systems, for creative designers. So, to activate this systems demand appropriate sources of information, performance data of elements and design tools offering architects and designer. Therefore this paper describe application elements for BIPV system and then predict improvement in the generated electric power performance of balcony BIPV system.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권5호
• /
• pp.273-278
• /
• 2004

This paper analyzed the phase noise characteristics of frequency-shifting module by figuring out the relationship between the phase noise components of 1st and 2nd local oscillator composing the frequency-shifting module and those of RF output signals shifted in frequency. Also, frequency-shifting module with the improvement of the phase noise performance was designed and implemented by means that the phase noise components of 1st local oscillator were cancelled in the output signal. Output signal has been affected by only phase noise of 2nd local oscillator, which had excellent phase noise performance than that of the 1st local oscillator.

• 한국농공학회논문집
• /
• 제46권1호
• /
• pp.61-71
• /
• 2004

The performance evaluation and deflection of 3 spans concrete simplicity slab bridge analyzed by non-destructive and loading test. Compressive strength of slab and pier appeared in the range of each 353∼366 kgf/$cm^2$ and 152∼215 kgf/$cm^2$ in rebound number test. Also, it appeared that concrete quality of slab was good after performance improvement. The average compressive strength of slab by core picking appeared 229 kg/$cm^2$. In reinforcing bar arrangement test of span and member, it appeared that horizontal and vertical reinforcing bar was arranged to fixed interval. The value of calculation deflection that carried structural analysis with deflection analysis wave in static loading test appeared higher than that of experimental deflection and it appeared that hardness of this bridge was good. Maximum impact factor that estimated from deflection by running speed in dynamic loading test appeared by 0.216 in 10 km/hr running speed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1146-1148
• /
• 2007

This paper proposes a method to improve the charging speed and discharging performance of a high voltage capacitor used in a portable medical device. The improvement of the charging speed was achieved by duty cycle control. The discharging performance was carried out by varying the phase duration and the leading edge voltage of the output according to the transthoracic impdedance of the patient. As a result, the improvement in the charging speed and the performance of the discharging parameters shorten the patient treatment time.

• 정보통신설비학회논문지
• /
• 제3권2호
• /
• pp.5-10
• /
• 2004

In this paper, the hybrid-type current controller for inverter TIG systems was implemented and it was shown that the low-current pulse wave forms with high dynamic performance could be obtained. It is not sri easy to obtain the optimum gain tuning of PID controllers in digital PWM control methods. Hybrid control methods which uses automatic tuning techniques after adding fuzzy control methods to traditional PID controllers are chosen to improve the dynamic performance of PID controller's. To demonstrate the practical significance and dynamic performance improvement of the results, some simulation and experimental results are presented.

• Journal of information and communication convergence engineering
• /
• 제2권2호
• /
• pp.61-66
• /
• 2004

This paper presents a way to maximize transmission efficiency and reception ability through transmission diversity technology, which can be adapted to wireless multimedia Wireless LAN system. The presented method is a comparative analysis between a case where parameter a for time average is 0.3.1 with consideration of channel presumption with two types of rms delayed spread, which is 50nsec. 150nsec, for the performance analysis of STTC (Space-Time Trellis Code) adopting time-space ciphering method appropriate for MIMO channel, and performance in the case where presumed channel value from long training column section is applied to according frame in a single frame. The result showed that BER brought SNR improvement of l.0dB in $10^{-3}$ when a was 0.3 than adopting only the long training column, and showed increase of general performance improvement for the sake of time average rather than the case without.