• 한국공간구조학회논문집
• /
• 제21권4호
• /
• pp.57-64
• /
• 2021

This paper conducted a comparative analysis of the shear buckling characteristics of trapezoidal and sinusoidal corrugated steel plates considering of their initial imperfection. Initial imperfection refers to the state where the shape of the corrugated plate is initially not perfect. As such, an initially imperfect shape was assumed using the eigen buckling mode. To calculate the buckling stress of corrugated steel plates, the linear buckling analysis used a boundary condition which was applied to the plate buckling analysis. For the comparison of trapezoidal and sinusoidal corrugation, the shape parameters were assumed using the case where the length and slope of each corrugation were the same, and the initial imperfection was considered to be from 0.1% to 5% based on the length of the steel plate. Here, for the buckling analysis, ANSYS, a commercial FEA program, was used. From the results of buckling analysis, the effect of overall initial imperfection showed that the larger the initial imperfection, the lower the buckling stress. However, in the very thin model, interaction or local buckling was dominant in the perfect shape, and in this case, the buckling stress did not decrease. Besides, the sinusoidal model showed higher buckling stress than the trapezoidal one, and the two corrugation shapes decreased in a similar way.

• 한국생산제조학회지
• /
• 제7권1호
• /
• pp.51-57
• /
• 1998

In order to minimize vibration problems of rotating machinery rotors have been assembled through balancing machines. Since perfect balancing is impossible, residual unbalances cause serious vibration while the rotor is in high speed region. To minimize unbalance effects of magnetic bearing systems (AMB) during rotation on-line balancing methodology was studied. Unbalances were considered as disturbances of the system. The disturbance observer was used to estimate unbalance force from measurable state and input variables. Balancing inputs computed according to LQR and outputs of the observer were applied to eliminate unbalances during high speed rotation of the AMB. the effectiveness of the on-line balancing was verified through numerical simulations.

• 보존과학연구
• /
• 통권7호
• /
• pp.48-55
• /
• 1986

The gold crown unearthed from the ancient tombs at Imdang-dong, Kyongsan-gun, Kyongsangbuk-do was in a state of severe corrosion that its original pattern couldn't be identified. Therefore, for the conservation of the relics, the following methods are employed :1. With 10% formic acid are used for the elimination of the bronze-rust and then plated them with gold.2. As a rust-proof treatment, 1% Benzotriazole is used for stem corrosion as well3. For protection and reinforcement of the surface of the relics, 30% incralac agentsare used.4. Pieces of fragments are bonded together by cyanoacrylate and on the backside are coated partially with Araldite for the reinforcement of the glass-wool.5. Silica-gels are kept into the acryl box for perfect maintenance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.299-302
• /
• 1996

A control algorithm is proposed for nonlinear multi-input multi-output(MIMO) batch processes by combining quadratic iterative learning control(Q-ILC) with model predictive control(MPC). Both controls are designed based on output feedback and Kalman filter is incorporated for state estimation. Novelty of the proposed algorithm lies in the facts that, unlike feedback-only control, unknown sustained disturbances which are repeated over batches can be completely rejected and asymptotically perfect tracking is possible for zero random disturbance case even with uncertain process model.

• 콘크리트학회논문집
• /
• 제11권6호
• /
• pp.129-135
• /
• 1999

Reinforced concrete structures are constructed under the basic assumption of perfect bonding between steel and concrete. The corrosion of steel in the reinforced concrete beams results in the excessive cracks and gradual deterioration of concrete. This paper are concerned about the slip characteristics of reinforced concrete between steel and concrete. The accelerated test by external power supply was conducted with the three corrosion rates in the laboratory. As a result, it was obtained as follows: (1) the yield strength of steel was reduced according to corrosion states. (2) the equivalent steel area should be considered for detailed analysis. (3) According to the use of corroded steel or not, slip amounts between concrete and steel in test beams increased as the corrosion rate increased. These results can be explained from the bond loss between concrete and steel in test beams.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2002년도 춘계학술대회 및 임시총회
• /
• pp.211-214
• /
• 2002

In this paper, we propose a robust indirect adaptive fuzzy state feedback regulator based on Takagi-Sugeno fuzzy model. The proposed adaptive fuzzy regulator is less sensitive to singularity than the conventional one based on the feedback linearization method. Furthermore, the proposed control method is applicable to not only plants with a perfect model but also plants with an imperfect model, which causes uncertainties. We verify the global stability of the proposed method by using Lyapunov method. In order to support the achievement, the application of the proposed adaptive fuzzy regulator to the control of a nonlinear system under the external disturbance is presented and the performance was verified by some simulation result.

• 한국해양공학회지
• /
• 제15권3호
• /
• pp.58-62
• /
• 2001

The objective of research is to clarify the interaction between dislocations and precipitates during high temperature creep deformation behaviors of high n austenitic steels. After measuring the internal stress in minimum creep rate state under applied stress of 236MPa at 873K, a transmission electron microscope (TEM) observation was performed to investigate the interaction between dislocations and precipitates during high temperature creep deformation. The band widths and values of internal stress increased when the nitride precipitates distribute more densely. Fine nitrides disturbed the dislocation movement with pinning the dislocations and perfect dislocations were separated into Shockley partial dislocations by fine nitrides. Coarse nitrides disturbed the dislocation movement with climb mechanism.

• 셀메드
• /
• 제8권1호
• /
• pp.1.1-1.4
• /
• 2018

We have various understandings regarding health. Various medical systems being practiced in India other than conventional medicine i.e. Ayurveda, Yoga & Naturopathy, Unani, Siddha and Homoeopathy have defined health in their own way. From physical level up to spiritual level health has so many aspects which affect our overall personality. Some says that one who is established in self is healthy but some other says that in a perfect state of health physical homeostasis and mental equanimity occur in a balanced and healthy harmony. Another concept believes that health is normal and harmonious vibration of the elements and forces composing the human entity on the physical, mental, moral and spiritual planes of living in accordance with the constructive principles in Nature. At one place it is stated that good health means existence in harmony with evolution. The authors have reviewed various concepts and definitions of health and trying to conclude that health is a feeling which may be experienced only if you are really healthy. So, health is more and more balancing of all elements of your life in harmony with the universe.

• 한국정보통신학회논문지
• /
• 제2권4호
• /
• pp.553-558
• /
• 1998

We present in this paper the ture union bound of the performance of chip level detection for coded DS/CDMA system operating in Rician fading channels such as LEO satellite mobile radio where the maximum doppler frequency is very high. The main objective of this paper is to calculate the exact doe union bound of BER performance of different performance of different quadrature detectors and to find a optimum spreading factor as a function of fade rate. The rationale of using multiple chip detection is to reduce the effective fade rate or variation. We considered chip level differential detection, chip level maximum likelihood sequence estimation, noncoherent detection and coherent detection with perfect channel state information as a reference.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전력기술부문
• /
• pp.328-330
• /
• 2007

Recently, the research of PM (Preventive Maintenance) method on the RCM(Reliability-Centered Maintenance) of the system equipment is being actively advanced for a few years. The state of the power equipment is maintained like the states of the between 'as good as new ones' and 'as bad as old ones' by imperfect Maintenance that implies the life decrease of the equipment by frequent breakdown, the error of maintenance process, and so on. So, the Maintenance method considering the real case has to reflect Imperfect maintenance than perfect maintenance. This paper suggests the Preventive Maintenance method by using Quasi - Renewal Theory for the gas turbine equipment as deliberating the imperfect maintenance for the real cases.