• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.221-224
• /
• 2001

A new code: LS code was proposed for IMT-2000 CDMA system. The code has special properties during a certain time of interval: 1) perfect autocorrelation 2) perfect crosscorrelation. The perfect autocorrelation means that the autocorrelation has nMaximum for zero time-offset and zero for other times during a certain time. Moreover the perfect crosscorrelation means that the crosscorrelation has zero during a time of interest. In the LAS-DMA system, the LS code is only used in the spreading of data bits in contrast to the conventional CDMA system. Therefore the LS code pair setting and allocation order should be dealt with carefully considering the special properties of LS code. This paper is intended as an investigation of the setting LS code pair and the sequential allocation method. Firstly, the optimum LS code pair set is proposed in order to minimize PAPR. Secondly, the sequential allocation method is studied to either minimize PAPR or expand IFW.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.2
• /
• pp.9-17
• /
• 2008

When the stagnation temperature of the combustion chamber or ambient air increases, the specific heats and their ratio do not remain constant any more, and start to vary with this temperature. The gas remains perfect, except, it will be calorically imperfect and thermally perfect. A new generalized form of the Prandtl Meyer function is developed, by adding the effect of variation of this temperature, lower than the threshold of dissociation. The new relation is presented in the form of integral of a complex analytical function, having an infinite derivative at the critical temperature. A robust numerical integration quadrature is presented in this context. The classical form of the Prandtl Meyer function of a perfect gas becomes a particular case of the developed form. The comparison is made with the perfect gas model for aim to present a limit of its application. The application is for air.

• Journal of Communications and Networks
• /
• v.5 no.1
• /
• pp.19-24
• /
• 2003

A new code, LS code, was proposed for the IMT-2000 CDMA system. The code has special properties during a specific time interval: 1) perfect autocorrelation, and 2) perfect crosscorrelation. Perfect autocorrelation means maximum autocorrelation for zero time-offset and zero autocorrelation for all other times during a specific time interval. Moreover, perfect crosscorrelation means that the crosscorrelation has zero value during a certain time, you can remove all the MAI within that time. However, the detailed properties of LS code and its exact generation method have been previously unknown. Therefore, we investigate the LS code in regards to its exact generating method, properties, and performances in this paper.

• Kyungpook Mathematical Journal
• /
• v.48 no.1
• /
• pp.143-154
• /
• 2008

Lomp [9] has studied finitely generated projective modules over semilocal rings. He obtained the following: finitely generated projective modules over semilocal rings are semilocal. We shall give necessary and sufficient conditions for finitely generated modules to be semilocal modules. By using a lifting property, we also give characterizations of right perfect (semiperfect) rings. Our main results can be summarized as follows: (1) Let M be a finitely generated module. Then M has finite hollow dimension if and only if M is weakly supplemented if and only if M is semilocal. (2) A ring R is right perfect if and only if every flat right R-module is lifting and every right R-module has a flat cover if and only if every quasi-projective right R-module is lifting. (3) A ring R is semiperfect if and only if every finitely generated flat right R-module is lifting if and only if RR satisfies the lifting property for simple factor modules.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.11 no.3
• /
• pp.65-75
• /
• 2007

A graph G is self-complementary (sc) if it is isomorphic to its complement. G is perfect if for all induced subgraphs H of G, the chromatic number of H (denoted ${\chi}$(H)) equals the number of vertices in the largest clique in H (denoted ${\omega}$(H)). An sc graph which is also perfect is known as sc perfect graph. A comparability graph is an undirected graph if it can be oriented into transitive directed graph. An sc comparability (scc) is clearly a subclass of sc perfect graph. In this paper we show that no two non-isomorphic scc graphs with n vertices each, (n<13) have same spectrum, and that the smallest positive integer for which there exists hyper-energetic scc graph is 13.

• Bulletin of the Korean Mathematical Society
• /
• v.58 no.4
• /
• pp.829-836
• /
• 2021

In this paper, we consider several domination parameters like perfect domination number, locating-domination number, open-locatingdomination number, etc. in the Mycielski graph M(G) of a graph G. We found upper bounds for locating-domination number of M(G) and computational formulae for perfect locating-domination number and open locating-domination number of M(G). We also showed that the perfect domination number of M(G) is at least that of G plus 1 and that for each positive integer n, there exists a graph G_n such that the perfect domination number of M(G_n) is equal to that of G_n plus n.

• ETRI Journal
• /
• v.45 no.6
• /
• pp.929-938
• /
• 2023

The detection of all the symbols transmitted simultaneously in multiuser systems using limited wireless resources is challenging. Traditional model-based methods show high performance with perfect channel state information (CSI); however, severe performance degradation will occur if perfect CSI cannot be acquired. In contrast, data-driven methods perform slightly worse than model-based methods in terms of symbol error ratio performance in perfect CSI states; however, they are also able to overcome extreme performance degradation in imperfect CSI states. This study proposes a novel deep learning-based method by improving a state-of-the-art data-driven technique called deep soft interference cancellation (DSIC). The enhanced DSIC (EDSIC) method detects multiuser symbols in a fully sequential manner and uses an efficient neural network structure to ensure high performance. Additionally, error-propagation mitigation techniques are used to ensure robustness against channel uncertainty. The EDSIC guarantees a performance that is very close to the optimal performance of the existing model-based methods in perfect CSI environments and the best performance in imperfect CSI environments.

• Bulletin of the Korean Mathematical Society
• /
• v.32 no.2
• /
• pp.145-152
• /
• 1995

From now on, we assume that a ring R has an identity 1. We have the following Lemma from Park[2].

• The KIPS Transactions:PartA
• /
• v.14A no.2
• /
• pp.107-116
• /
• 2007

In this paper, we present a method on the construction of multiple-valued circuits using Reed-Muller Expansions(RME). First, we discussed the input output interconnection of multiple valued function using Perfect Shuffle techniques and Kronecker product and designed the basic cells of performing the transform matrix and the reverse transform matrix of multiple valued RME using addition circuit and multiplication circuit of GF(4). Using these basic cells and the input-output interconnection technique based on Perfect Shuffle and Kronecker product, we implemented the multiple valued logic circuit based on RME. The proposed design method of multiple valued RME is simple and very efficient to reduce addition circuits and multiplication circuits as compared with other methods for same function because of using matrix transform based on modular structures. The proposed design method of multiple valued logic circuits is simple and regular for wire routing and possess the properties of concurrency and modularity of array.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.2
• /
• pp.191-199
• /
• 2000

Wettability of addition silicone impression material is very important property for making an accurate restoration. This study examined the impression quality in clinical condition and the wettability of impression and die material. Four commercially available addition silicone impression material (Express, Examix, Contrast, Perfect) and three die materials (Die-Keen, Vel-Mix, Fuji-Rock) were studied. A total of 50 putty/wash and heavy body/wash impressions of wet intact permanent molar teeth were examined for definition of the gingival sulcus reproduction and then classified in quality ranking. The percentage of the sulcus reproduction ability of each material was calculated from the sulcus depths of cross-sectioned epoxy resin casts from the impressions and clinically measured sulcus depths, The same impression materials were used to produce 3 groups of die stone casts form void entrapment die had been exposed to milk. Voids in the impression body and stone casts ere counted under a stereoscopic microscope. From the experiment, the following results were obtained : 1. Sulcus reproduction ability of additional silicone impression material were diminished in order of Express, Examix, Perfect, Contrast. The significant difference was found between Perfect and other material. Heavy body/wash combination was superior In putty/wash method n Perfect impression material. 2. In direct observation, Contrast showed least void in impression body but correlations ere not found between sulcus reproduction and void production. 3. In void entrapment laboratory test, wettability were diminished in order of Examix, Contrast, Express, Perfect. Clinical impression recording seems not to correlate with laboratory test. 4. The wettability of die material to impression material was not different in Express, Examix, Contrast. But, in Perfect, Die-Keen had superior wettability to others.