• Industry Promotion Research
• /
• v.2 no.1
• /
• pp.69-75
• /
• 2017

In this study, 62 questionnaires were surveyed from November 3 to November 25, 2016 for workers who received more than one skill improvement training at Korea Polytechnic University. Factor analysis was done by removing 11 items out of 27 items and using the final 16 items, five factors were derived and the validity was confirmed with significance probability p = .000. Durbin-Watson values were 1.787 and 1.780, respectively. The results of this study were as follows: First, the effects of skill enhancement training on job attitude of Korea Polytechnic University were found as follows. First, the effects on job satisfaction were consistency of contents (p <.05, ${\beta}=.434$) (P <.05, p = .328), and the sense of belonging was significant (p <.05, p = .338). Second, the correlation between the skill improvement training and the turnover attitude shows that the efficiency of method - job satisfaction (.311), efficiency of method - clarity of purpose (.350), efficiency of method - suitability of content (.771) - content fit (.467), job satisfaction - content fit (.191), but the sense of belonging was not correlated. Third, the results of the difference in perception of turnover attitude according to years of service of technical improvement training at Korea Polytechnic University did not have a statistically significant effect. In this study, it is meaningful to investigate the effect of the skill improvement training on the attitude of turnover and its effectiveness.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.5
• /
• pp.799-810
• /
• 2022

Welding work is a production work method widely used throughout the industry, and various types of welding technologies exist. In addition, many methods are being studied to automate these welding operations using robots, but in the ship manufacturing field, welding such as painting, cutting, and grinding is also the most common operation, but the manual operation ratio is higher than in other industries. Such a high manual labor ratio in the field of ship manufacturing not only causes quality problems and production delays according to the skill of workers, but also causes problems in the supply and demand of manpower. Therefore, this paper analyzed the reason why the automation rate is low in welding work at ship manufacturing sites compared to other industries, and analyzed the production process and field environment for small and medium-sized ship manufacturing companies that repeatedly manufactured with a small quantity production method. Based on the analysis results, it is intended to propose a robot system that can easily move between workplaces and secure uniform welding quality and productivity by collaborating simple welding tasks with humans. Finally, the simulation environment is constructed and analyzed to secure the suitability of robot system application to current production site environment, work process, and productivity, rather than to develop and apply the proposed robot system. Through such pre-simulation and robot system suitability analysis, it is expected to reduce trial and error that may occur in actual field installation and operation, and to improve the possibility of robot application and positive perception of robot system at ship manufacturing sites.

• Journal of Digital Convergence
• /
• v.19 no.7
• /
• pp.1-9
• /
• 2021

The core competencies such as technology have been rapidly developing with advent of the fourth industrial revolution. One of the representative technologies in the era of the 4th Industrial Revolution is artificial intelligence(AI). In particular, AI makes human life richer and more comfortable and has many positive aspects. The negative aspect is that AI is likely to replace the organizational members' job and has the ability to replace skills associated with it. These threats may increase the level of perception that organizational members may loss their job. Moreover, it may lead to a sense of anxiety. In addition, organizational members who perceive job uncertainty highly, the job substitution anxiety may be become highly. According to this, their job satisfaction can be lower. Overall, this research emphasized the negative aspects of AI in contrast to the positive aspects of the fourth industrial era. It is also emphasized that the organization should need to recognize such problems and seek solutions to reduce workers' anxiety. Finally, practical implications and research directions of future study were presented through the research results.

• Journal of Distribution Science
• /
• v.13 no.1
• /
• pp.35-46
• /
• 2015

Purpose - This paper attempted to investigate the relationships among the perception of job insecurity and organizational effectiveness, and it examines these relationships while considering the moderating effect of trust in the manager and self-efficacy. Job insecurity is an independent variable, organizational effectiveness aspects (job satisfaction, organizational commitment, and turnover intention) are dependent variables, and trust and self-efficacy are moderators. Research design, data, and methodology - Regression analysis was used to verify the effects. The measurement items were already deemed as reliable and valid in the previous study, but for this purpose, some modifications were made. To examine the model, this study relied on the samples chosen from Korean employees in the six franchise business firms. The survey was conducted on 288 workers. Each question is based on a 5-point Likert type scale. The data were analyzed using SPSS 18.0. Results - The results of the study are summarized as follows. First, job insecurity has an influence on organizational effectiveness aspects (negatively on job satisfaction, negatively on organizational commitment, and positively on turnover intention). Second, analyzing the moderating effect of trust, trust in manager is mediated between job insecurity and organizational effectiveness aspects (on organizational commitment and on turnover intention). However, employees' trust in manager had no significant moderating effect on the job insecurity-job satisfaction relationship. Third, self-efficacy is mediated between job insecurity and organizational effectiveness aspects (on job satisfaction, on organizational commitment, and on turnover intention). Conclusions - First, it is necessary to be aware of the seriousness of employees' job insecurity in franchise firms, which have played a pivotal role in national economic growth, and to create a detailed plan for reducing insecurity and actively implementing it. To this end, the franchise companies should implement efficiency efforts such as obtaining an appropriate capacity of equipped personnel and a training program. Second, there are moderating effects of self-efficacy and trust in the relationship between job insecurity and organizational effectiveness. Depending on business conditions, stability and instability can only be experienced in the organizations of franchise companies. This can give rise to instability in employment. Therefore, it is necessary to develop and utilize a system that can be minimized with a change in the new awareness of employment instability. After all, a good leader (manager) must accumulate personal trust and build up a core competence that is necessary to become competent in the field himself. Even if you lack the material resources to improve performance, if the leader with the core competencies (e.g., technical/management /organization/marketing/design) can gain the trust of the supervisor, you can get a good organizational performance. Therefore, you should foster a healthy organizational culture through education such as leadership training and employee training to be built on trust between the leaders and the employees. In addition, you need to focus on HRD&M training in order to increase the self-efficacy of the supervisor.

• 대한공업교육학회지
• /
• v.36 no.2
• /
• pp.239-256
• /
• 2011

The purpose of this study is to deduce the effective improvement plans of engineering education system and to provide the base materials by analyzing satisfaction and problems in the perception survey of stakeholders related in engineering education system including Engineering Education Accreditation System. Engineering education system improvement plans from the results of study are as follows. First, government and university should provide more financial support to the college in order to improve education environment such as laboratories and equipment. Second, in order to improve links among engineering education stakeholders, student-professor, student-faculty, and colleges should operate effective mentoring program and consultation plan. Third, according to service quality evaluation, colleges need to give rewards to distinguished faculties for their outstanding work and build up job training about services in order to enhance satisfaction of students and professors, Also, business related to Engineering Education Accreditation System should be simplified and needs to increase the number of workers exclusively responsible for this work. Forth, in order to enhance comprehension of learning outcome and outcome of Engineering Education Accreditation System, it is necessary to improve Engineering education innovation center's status, to establish active systematic promotion system and to operate engineering education evaluation expert committee such as 'Engineering education system evaluation council'. Fifth, because of the stakeholder's shortage of benefits and tiredness accumulation, the issue of effectiveness in engineering education institutions has raised controversy. Thus, engineering education institutions needs to take measure necessary. Moreover, engineering education improvements should be improved by reflecting opinions from professors, faculties and students who are practically planning, operating and participating engineering education programs.

• Journal of the Korea Convergence Society
• /
• v.11 no.7
• /
• pp.25-33
• /
• 2020

This research is to identify the status of the curriculum based on dental hygiene programs, the awareness about medical service technologists, etc. act and job demands of students in the department of dental hygiene. The data was collected by self-reported questionnaires from 536 dental hygiene students. This data was analyzed using SPSS 19.0K program for Windows with a statistical significance level of 0.05. The level of objective awareness of the current Medical Service Technologists Act was higher for females(9.14±1.11) than for males(8.56±1.79)(p=0.043). Meanwhile, there was little difference between college and university(p=0.639), whereas the level dropped as the number of clinical practice experiences went up(p=0.045). Therefore, the law in convergence needs to be revised to reflect the reality of dental hygienists' work, and the dental community needs to change its perception that dental hygienists are not only recognized as assistant workers but also as business partners.

• 대한공업교육학회지
• /
• v.45 no.1
• /
• pp.84-102
• /
• 2020

During the period of rapid industrial growth, specialized high schools were important vocational education institutions trained specialists and technicians. But now, specialized high schools turned into high schools where the low-ranking students who were pushed out of the competition for admission due to a decline in the education population, changes mostly in labor demand in the labor market, and discrimination against skilled workers. In order to solve this problem, the middle school 3rd grade teachers in charge of the middle school can provide early career guidance, so that they can decide to go to the specialized high school according to their aptitude and talent rather than their grades. The purpose of this study is to investigate the relationship between general characteristics and perception of middle school 3rd grade teachers, and the rate of decision to enter specialized high school. In 2018, The middle school 3rd grade teachers in charge in Daejeon metropolitan city were selected. The results of this study were as follows: When 3rd grade teachers in charge are the male teachers 21.01%(M=.2101) of their students go to specialized high schools. When they are teachers who have not graduated from college of education(M=.2110), with doctoral degree(M=0.3064), of their students go to specialized hight schools. Finally, there was a significant positive relationship between perceptions of high school teachers (β1 = .245, p = .000) and high school graduates (β2 = .149, p = .027). The regression equation derived from this is y = -0.56 + 0.037 * β1 + 0.025 * β2 10.1% (R² = 0.101).

• Asia Marketing Journal
• /
• v.15 no.1
• /
• pp.83-105
• /
• 2013

During recent decades, the number of mixed attribute products (henceforth mixed products), which have both utilitarian and hedonic benefits, has increased dramatically. Despite these products' growing popularity, academic research has paid little attention to them, and there remains a gap between theory and the real world. Hence, our study was undertaken to understand consumers' perceptions about and behaviors toward mixed products, as well as factors affecting the evaluation and choice of these products. We divided mixed attribute products into two categories: mixed utilitarian products (utilitarian products adding hedonic attributes) and mixed hedonic products (hedonic products adding utilitarian attributes). We then showed how adding different attributes affects consumers' perception, willingness to pay (WTP), and the choice of mixed attribute products compared to pure utilitarian or pure hedonic products. We conducted an experiment using a within-subject design. A total of 160 office workers and college students participated in the study. The pure utilitarian product used in the study was orange juice, and the mixed utilitarian product was carbonated orange juice. The pure hedonic product was chocolate, and the mixed hedonic product was polyphenol enriched chocolate. Results showed that consumers perceived a mixed utilitarian product to be less utilitarian, less pleasurable and more guilty than a pure utilitarian product. On the other hand, a mixed hedonic product was perceived to be more utilitarian, less pleasurable and less guilty than a pure hedonic product. Also, WTP for a mixed hedonic product was higher than WTP for a pure hedonic product, but WTP was lower for a mixed utilitarian product than for a pure utilitarian product. Furthermore, mixed hedonic products were likely to be evaluated more favorably when they were presented together with pure hedonic products, more so than when they were presented alone. Finally, when compared to low self-control participants, high self-control participants chose mixed hedonic products more frequently. The present study contributes to the existing literature on utilitarian and hedonic consumption by adding to the sparse literature on the consumption of products that have both utilitarian and hedonic purposes. Also, our research findings provide several useful implications for practitioners in related fields. First, the current study provides marketers with a useful guide for understanding consumers' perceptions of these types of products, and helps to predict how adding different attributes influences these products. Second, this study has examined the conditions that may moderate the evaluation and choice of hedonic base products and this finding will serve as a good reference for marketers of mixed hedonic products in marketing communication strategy, in-store marketing and targeting. Specifically, comparative advertising with a pure hedonic product will be beneficial for a mixed hedonic product. Also, displaying mixed hedonic products near pure hedonic products may enhance the effectiveness of in-store marketing of mixed hedonic products.

• The Journal of the Korea Contents Association
• /
• v.22 no.9
• /
• pp.217-233
• /
• 2022

This study was conducted with the purpose of deriving a revitalization plan by analyzing the factors influencing the characteristics and perception of self-employment and self-employment selection of young people. To this end, discussions on self-employment and the size of workers were reviewed, and the characteristics, determinants, and difficulties of self-employment youth were analyzed based on data from a survey of youth in Seoul and Gyeonggi-do. The support plan proposed through the analysis should first strengthen the program so that the government, local governments, and schools can all gain experience in the practice of developing ideas, producing, and selling based on aptitude and competency to solve youth employment problems. Next, compared to support for technology-based start-ups, there are no suitable programs in the fields of knowledge, manufacturing, and distribution, and there is almost no support for freelancers in which the majority of young people are engaged. Therefore, it is necessary to diversify support projects so that the diversity of young people can be expressed in self-employment. Finally, it was found that entrepreneurship had an important influence on self-employment. However, Korean teenagers do not know what entrepreneurship is and have no experience in education, so they should focus on cultivating entrepreneurship in the regular curriculum and establishing a cultural foundation to foster young leaders with creative ideas and execution.

• Information Systems Review
• /
• v.15 no.3
• /
• pp.71-87
• /
• 2013

Companies as well as the Korean government show growing attention to the Smart Work which is enabled by the ongoing development of information and communication technologies (ICTs). Smart Work can be regarded as an extended version of telecommuting or distance work and defined as "working efficiently and conveniently regardless of time and place utilizing ICTs." Smart Work currently puts its emphasis on the work and life balance by changing the ways of working. Despite its emphasis on work and life balance, it is expected the boundaries between work and nonwork would blur, work and nonwork boundaries may become more permeable, and role conflicts would occur more times than before. To find ways to enhance work and life balance while escaping from expected conflicts in the context of Smart Work, we investigate the work and nonwork boundary strengths and the factors affecting them. In the course, we consider asymmetries between the work and nonwork boundary strengths and bidirectional nature of work and nonwork permeability. We develop two research models having work and nonwork boundary strengths as respective dependent variables. We empirically found that work role identification and nonwork-to-work permeability had influences on the boundary strength at work and that work-to-nonwork permeability affected the boundary strength at nonwork. However, nonwork role identification did not show any significant influence on the boundary strength at nonwork.