• 한국안전학회지
• /
• 제14권2호
• /
• pp.155-162
• /
• 1999

reliability from components reliability. In this case, it assumes that components failure is mutually independent, but it may not true in real systems. In this study, the mean cost per unit time is computed as the ratio of mean life to the mean cost. The mean life is obtained by the reliability function under power rule model. The mean cost is obtained by the mathematical model based on the inspection interval. A heuristic method is proposed to determine the optimal number of redundant units and the optimal inspection interval to minimize the mean cost per unit time. The assumptions of this study are as following : First, in the load-sharing k-out-of-n:G system, total loads are applied to the system and shared by the operating components. Secondly, the number of failed components affects the failure rate of surviving components as a function of the total load applied. Finally, the relation between the load and the failure rate of surviving components is set by the power rule model. For the practical application of the above methods, numerical examples are presented.

• KDI Journal of Economic Policy
• /
• 제39권1호
• /
• pp.83-102
• /
• 2017

Price control can restore efficiency in some cases, but an uncarefully designed policy fails to restore efficiency, yields side effects, or even exacerbates efficiency losses. This paper shows that the copyright royalty rule, which takes the greater of ad valorem royalties and perunit royalties, tends to fix the prices of final goods at a specific level. Such a rule weakens competition as it prevents prices from decreasing even when market conditions change, having negative effects on social welfare as well as consumer surplus. Counterfactual analyses using estimation results in the Korean online music service industry show that firms could have profitably reduced prices if the ad valorem rule had been applied instead, although they did not have an incentive to do so under the original combination rule.

• 대한안전경영과학회지
• /
• 제2권2호
• /
• pp.85-94
• /
• 2000

This paper deals with the selection of a proper dispatching rule for an one-process Job scheduling that follows a particular distribution of an order production. That is, it makes a distribution on an order per unit period and applies to simulation model that uses it. This study consists of two purposes either seeks adequately production scheduling using priority rule or seeks extension of the facilities that increase current production efficiency through computer simulation in scheduling.

• 한국경영과학회지
• /
• 제23권1호
• /
• pp.97-107
• /
• 1998

This paper is concerned with a parallel system that sustains a time-independent load and consists of n components with exponential lifetimes. It is assumed that the total load is shared by the working components and the failures of components increase higher failure rates in the surviving components according to the relationship between the load and the fialure rates. The power rule model among several load-failure rate relationships is considered. We consider the system efficiency meausre as the expected profit earned by the system per unit time. The high load causes high gain but it also occurs frequent system failures. The expected profit per unit time is used as criterion to evaluate the system efficiency. The goal of system engineer is to determine the optimal load and redundant units maximizing the expected profit per unit time. First, the system reliability function is obtained and the optimization problem of the load-sharing parallel system is considered. Given the redundant units, the existence of the optimal load can be proved analytically and given the load, the optimal redundant units can be solved also analytically. The optimal load and redundant units are obtained simultaneously by numerical computation. Some numerical examples are studied.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.406-408
• /
• 2004

It is very necessary to adopt bad data processing in order to maintain the security and the reliability of data acquisition and management in the substation. This paper presents a bad data processing method of per module unit by using rule based system. The propriety of this method has been verified by the case study

• 한국컴퓨터정보학회논문지
• /
• 제17권10호
• /
• pp.25-33
• /
• 2012

본 논문에서는 모바일 환경에서 음성인식한 결과에 포함된 오류를 교정하는 규칙기반 접근방법을 제안한다. 제안하는 방법은 처리시간이나 메모리에 제약을 받는 모바일 환경을 고려하여 다음과 같이 구성된다. 오류 교정 속도를 최소화하기 위해서, 음절 해체 및 조합 과정이나 형태소 분석 등의 처리를 줄이고, 최장일치 규칙 선택기준을 바탕으로 오류 발생 추정 지점에서 교정 후보도 하나만 생성한다. 제안하는 방법은 메모리를 효율적으로 사용하기 위해서, 어절사전이나 형태소분석기를 사용하지 않고, 규칙도 유형별로 따로 구분하지 않고 통합하여 저장한다. 제안하는 방법은 모델의 수정 및 유지보수가 용이하도록, 오류교정규칙을 학습말뭉치에서 자동으로 추출하여 구축한다. 실험결과 제안하는 방법은 음성인식 결과에 대하여 정확률을 5.27% 정도 재현율을 5.60% 정도 개선하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.1071-1076
• /
• 2001

As a rule, in case of CFT for high-rise building, high strength concrete is required since it should have high fluidity, segregation resistance and large proportion of cement per unit considering the filling beneath the diaphragm. However, regarding the low-rise building under 20 stories, it is somewhat difficult to use high strength concrete. This is a fundamental study to develop a concrete with normal strength and high fluidity for CFT of low-rise building, whose Purposes are in speculating several kinds of changes in concrete's characteristics through various experiments and offering basic documents for practicalization in site and production through mock-up test.

• 대한조선학회논문집
• /
• 제34권4호
• /
• pp.84-90
• /
• 1997

무개형 콘테이너 선박에 대한 구조 설계 과정에 최적화 기법을 적용하여 최적 구조 시스템을 개발하였다. 중앙 단면 설계 기법으로는 L.R rules을 이용하였고 목적 함수는 중앙 단면 모든 종강도 부재 단면적의 합, 즉 최소 중량을 선택하였다. 최적화 기법으로는 직접탐색법에 SUMT방법을 결합시켜 사용하였다. 최소 중량 설계를 수행한 결과 실적선과 비교하여 8.0%의 중량감소를 보인 최적화 설계를 도출하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2001년도 학술논문발표회
• /
• pp.46-51
• /
• 2001

As a rule, in case of CFT for high-rise building, high strength concrete is required since it should have high fluidity, segregation resistance and large proportion of cement per unit considering the fi11ing beneath the diaphragm. However, regarding the low-rise building under 20 stories, it is somewhat difficult to use high strength concrete. This is a fundamental study to develop a concrete with normal strength and high fluidity for CFT of low-rise building, whose purposes are in speculating several kinds of changes in concrete's characteristics through various experiments and offering basic documents for practicalization in si to and production through mock-up test.

• 대한전자공학회논문지
• /
• 제24권2호
• /
• pp.254-259
• /
• 1987

This paper describes the CMOS standard cell library implemented in double metal single poly gate process with 3\ulcornerm design rule, and its results of testing. This standard cell library contains total 33 cells of random logic gates, flip-flop gates and input/output buffers. All of cell was made to have the equal height of 98\ulcornerm, and width in multiple constant grid of 9 \ulcornerm. For cell data base, the electric characteristics of each cell is investigated and delay is characterized in terms of fanout. As the testing results of Ring Oscillator among the cell library, the average delay time for Inverter is 1.05 (ns), and the delay time due to channel routing metal is 0.65(ps)per unit length.