• Journal of the Health Care and Life Science
• /
• v.8 no.2
• /
• pp.121-125
• /
• 2020

People counting has always been a method of interest for maximizing energy saving by identifying the congestion level or amount of use of a specific facility to efficiently manage the facility, or automatically implementing a power saving function by identifying the number of people entering and exiting a specific place such as a toilet. The method of counting people by image processing is very expensive and has the disadvantage of being severely affected by the surrounding environment of the lighting. In the case of the area sensor, there is a disadvantage of counting as one person when the number of people passes close with arms folded. In order to solve the existing method, which is expensive, affected by lighting, or inaccurate the number of people in certain cases, this paper proposes a new method of counting people using the principle of LiADAR. Accurate counting of the number of people entering the hospital will help manage hospital facilities, but it will also help to establish effective quarantine measures at the present time when Corona 19 is prevalent.

• International journal of advanced smart convergence
• /
• v.12 no.4
• /
• pp.147-153
• /
• 2023

In recent times, an absence of effective crowd management has led to numerous stampede incidents in crowded places. A crucial component for enhancing on-site crowd management effectiveness is the utilization of crowd counting technology. Current approaches to analyzing congested scenes have evolved beyond simple crowd counting, which outputs the number of people in the targeted image to a density map. This development aligns with the demands of real-life applications, as the same number of people can exhibit vastly different crowd distributions. Therefore, solely counting the number of crowds is no longer sufficient. CSRNet stands out as one representative method within this advanced category of approaches. In this paper, we propose a crowd counting network which is adaptive to the change in the density of people in the scene, addressing the performance degradation issue observed in the existing CSRNet(Congested Scene Recognition Network) when there are changes in density. To overcome the weakness of the CSRNet, we introduce a system that takes input from the image's information and adjusts the output of CSRNet based on the features extracted from the image. This aims to improve the algorithm's adaptability to changes in density, supplementing the shortcomings identified in the original CSRNet.

• Journal of Broadcast Engineering
• /
• v.21 no.4
• /
• pp.493-505
• /
• 2016

Among modern computer vision and video surveillance systems, the pedestrian counting system is a one of important systems in terms of security, scheduling and advertising. In the field of, pedestrian counting remains a variety of challenges such as changes in illumination, partial occlusion, overlap and people detection. During pedestrian counting process, the biggest problem is occlusion effect in crowded environment. Occlusion and overlap must be resolved for accurate people counting. In this paper, we propose a novel pedestrian counting system which improves existing pedestrian tracking method. Unlike existing pedestrian tracking method, proposed method shows that average filter tracking method can improve tracking performance. Also proposed method improves tracking performance through frame compensation and outlier removal. At the same time, we keep various information of tracking objects. The proposed method improves counting accuracy and reduces error rate about S6 dataset and S7 dataset. Also our system provides real time detection at the rate of 80 fps.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.10
• /
• pp.1361-1368
• /
• 2020

The system for counting the number of people has traditionally been implemented in various ways. Existing systems include infrared sensors, lasers, cameras, etc. In the case of such an existing system, there are restrictions on space such as ceilings and sides of walls. In this paper, we propose a method of detecting the footsteps of pedestrians using a piezoelectric mat containing a number of piezoelectric sensors and counting the number of pedestrians passing simultaneously by using the data collected from the piezoelectric mat. When pedestrians pass over piezoelectric mats, the collected sensor data was aggregated using SPI communication and transmitted to PC server using TCP/IP communication. Performance analysis shows that approximately 600 step data can be recognized with 99% accuracy. This is to overcome the shortcomings of other counting systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.7
• /
• pp.935-941
• /
• 2020

People estimation is important to provide IoT services. Most people counting technologies use camera or sensor data. However, the conventional technologies have the disadvantages of invasion of privacy and the need to install extra infrastructure. This paper proposes a method for estimating the number of people using a Wi-Fi AP. We use channel state information of Wi-Fi and analyze that using deep learning technology. It can be achieved by pre-installed Wi-Fi infrastructure that reduce cost for people estimation and privacy infringement. The proposed algorithm uses a k-binding data for pre-processing process and a 1D-CNN learning model. Two APs were installed to analyze the estimation results of six people. The result of the accurate number estimation was 64.8%, but the result of classifying the number of people into classes showed a high result of 84.5%. This algorithm is expected to be applicable to estimate the density of people in a small space.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1441-1446
• /
• 2017

In recent, the studies on the systems have been progressing that count the number of people passing through passageway or count people who exist in specific space. The existing people counting systems count the number of people using ultrared sensors, ultrasonic sensors or camera sensors, which can be installed only on pillar or around wall. Though ultrared sensors and ultrasonic sensors is low cost, they are inadequate to detect incoming/outgoing when several pedestrians pass through passageway concurrently. In this paper, we designed a sensor mat using piezoelectric sensors to complement the above-mentioned disadvantage. Also, we implemented the system that detects direction of progress and counts the number of people. The sensor mat detects direction of progress using pressure given on sensors and timing information and counts the number of people when pedestrians pass through on a sensor mat.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.1
• /
• pp.28-37
• /
• 2019

In this paper, we propose a real-time system for counting people. The proposed system uses an impulse radio ultra-wideband(IR-UWB) radar to estimate the number of people in a given location. The proposed system uses learning-based classification methods to count people more accurately. In other words, a feature vector database is constructed by exploiting the pattern of reflected signals, which depends on the number of people. Subsequently, a classifier is trained using this database. When a newly received signal data is acquired, the system automatically counts people using the pre-trained classifier. We validated the effectiveness of the proposed algorithm by presenting the results of real-time estimation of the number of people changing from 0 to 10 in an indoor environment.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1416-1419
• /
• 2002

This paper describes an implementation method for the people counting system which detects and tracks moving people using a fixed single camera. This system counts the number of moving objects (people) entering the security door. Moreover, the detected objects are tracked by the proposed tracking algorithm before entering the door. The proposed system with In-tel Pentium IV operates at an average rate of 10 frames a second on real world scenes where up to 6 persons come into the view of a vertically mounted camera.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.19 no.1
• /
• pp.39-46
• /
• 2024

In this paper, we propose an efficient method for estimating the number of people and their locations using multiple IR-UWB radar sensors. Using three IR-UWB radar sensors in the indoor space, the measured signal from the target is processed to remove the clutter using rejection methods. Then, to further remove the clutter and to determine the presence of the human, the time-frequency image representing the micro-Doppler is obtained and classified by a convolutional neural network. Finally, the system finds the number of human objects and estimates each position in a two-dimensional space. In experiments using the measured data, the system successfully estimated the location and number of individuals with a high accuracy ≈ 88.68 %.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.5 s.311
• /
• pp.22-29
• /
• 2006

In this paper, we propose a block-based real-time people counting system that can be used in various environments including showing mall entrances, elevators and escalators. The main contributions of this paper are robust background subtraction, the block-based decision method and real-time processing. For robust background subtraction obtained from a number of image sequences, we used a mixture of K Gaussian. The block-based decision method was used to determine the size of the given objects (moving people) in each block. We divided the images into $6{\times}12$ blocks and trained the mean and variance values of the specific objects in each block. This was done in order to provide real-time processing for up to 4 channels. Finally, we analyzed various actions that can occur with moving people in real world environments.