• International Journal of Concrete Structures and Materials
• /
• v.7 no.1
• /
• pp.79-93
• /
• 2013

One of the biggest problems affecting bridges is the transverse cracking and deterioration of concrete bridge decks. The causes of early age cracking are primarily attributed to plastic shrinkage, temperature effects, autogenous shrinkage, and drying shrinkage. The cracks can be influenced by material characteristics, casting sequence, formwork, climate conditions, geometry, and time dependent factors. The cracking of bridge decks not only creates unsightly aesthetic condition but also greatly reduces durability. It leads to a loss of functionality, loss of stiffness, and ultimately loss of structural safety. This investigation consists of field, laboratory, and analytical phases. The experimental and field testing investigate the early age transverse cracking of bridge decks and evaluate the use of sealant materials. The research identifies suitable materials, for crack sealing, with an ability to span cracks of various widths and to achieve performance criteria such as penetration depth, bond strength, and elongation. This paper also analytically examines the effect of a wide range of parameters on the development of cracking such as the number of spans, the span length, girder spacing, deck thickness, concrete compressive strength, dead load, hydration, temperature, shrinkage, and creep. The importance of each parameter is identified and then evaluated. Also, the AASHTO Standard Specification limits liveload deflections to L/800 for ordinary bridges and L/1000 for bridges in urban areas that are subject to pedestrian use. The deflection is found to be an important parameter to affect cracking. A set of recommendations to limit the transverse deck cracks in bridge decks is also presented.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.359-360
• /
• 2009

This Study is performed Mock-up test accounting for height of placement to review behavior of mass concrete according to kinds of cement & form. First, we measured hydration heat and show a different hydration heat generation characteristics as compared with each other. And we measured mortar outflow, the strength of concrete core and standard specimens, concrete's ability to resist chloride ion penetration in order to durability estimation of concrete. This study was aims to improve quality of mass concrete under marine environment.

• Journal of Information Technology Applications and Management
• /
• v.22 no.1
• /
• pp.61-76
• /
• 2015

In general universal service in telecommunications means a regulatory tool to secure the availability of basic communication services like fixed telephony at an affordable price throughout a country. A re-evaluation of the scope of existing universal service, however, is becoming a core issue as the penetration and usage of broadband and mobile communications matures and a new ICT ecosystem emerges. This study examined whether the universal service polices in Korea need adapting and updating to include broadband and mobile telephony in the universal service, which is based on the necessary and sufficient conditions derived from previous research and foreign countries' experiences : geographical ubiquity of a certain service and the market's ability to provide the service. The result shows the nationwide ubiquity of broadband and mobile communications exists but the ultimate goal pursued by universal service polices trying to make them available and affordable for all is being fulfilled by market dynamics in Korea. Thus, the inclusion of both services in the scope of universal service is regarded as an unnecessary regulation at present time and the expansion of universal service could be addressed as a long-term issue depending on market conditions in the future.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1528-1537
• /
• 2005

The purpose of this study is investigated the method for estimation of the liquefaction on the reclaimed land, located in Incheon and assessed the ability of liquefaction under the condition of criteria, which is the magnitude '6.5' of seismic on the basis of the domestic seismic characteristics. Performed not only field test but the experiment as well to study how the fine content would affect into the dreging and reclaimed land and also estimated the safety factor through the empirical method and anticipated detail method based on the results. Within the reclaimed land, there are many sized soils which are almost extended from well-graded silty sand(SM) to poor-graded fine grained sand, and which have the condition, so called, the liquefaction which is easily to bring into under the circumstances within the ground. However, partly, now that the soil is mixed with silt and silty clay which include the content of fine grained dust quite a bit, the difficulties and inconveniences has been expected while trying to find the ratio of cyclic resistance, but finally Seed and Idriss method showed the most way when we estimate the safety factor on the liquefaction.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.805-814
• /
• 2016

Electric-field coupled power transfer (ECPT) systems have been proposed as an alternative wireless power transfer (WPT) technology in recent years. With the use of capacitive plates as a coupling structure, ECPT systems have many advantages such as design flexibility, reduced volume of the coupling structure and metal penetration ability. In addition, wireless communications are effective solutions to improve the safety and controllability of ECPT systems. This paper proposes a power and signal shared channel for electric-field coupled power transfer systems. The shared channel includes two similar electrical circuits with a band pass filter and a signal detection resistor in each. This is designed based on the traditional current-fed push-pull topology. An analysis of the mutual interference between the power and signal transmission, the channel power and signal attenuations, and the dynamic characteristic of the signal channel are conducted to determine the values for the electrical components of the proposed shared channel. Experimental results show that the designed channel can transfer over 100W of output power and data with a data rate from 300bps to 120 kbps.

• KIEAE Journal
• /
• v.16 no.5
• /
• pp.21-28
• /
• 2016

Purpose: The Objective of this study is to explore the capabilities of an integrated modelling and simulation workflow when applied to an experiment-based research process, aimed at deriving daylight optimization strategies specific to tall buildings. Methods: Two methods were devised to apply this workflow with the help of DIVA and Rhino/Grasshopper. The first method is a multiple variant analysis by setting up an appropriate base case and analysing its daylight and energy performance, forming the basis of comparison for subsequent cases for design variants. The second method involved setting up the base case within a site context and conducting a solar irradiation study. An architectural variables such as overhang and shading device, were then defined as inputs in the parametric definition in Grasshopper to control the selected variable. Results: While the first method took advantage of the speed and efficiency of the integrated workflow, the second method was derived based on the ability to directly process simulation data within the integrated, single-software platform of the proposed workflow. Through these methods, different architectural strategies were explored, both to increase daylight penetration and to reduce radiant heat gain. The focus is on methods by which this workflow can be applied to facilitate the experimental derivation of daylight optimization strategies that are specific to tall building design.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.536-542
• /
• 1996

Water-based acrylic sizing agent(GSW-7000) was prepared by emulsion copolymerization for sizing polyester yarns. Ammonium salt version of the acrylic sizing agent offered greater abrasion resistance to weaving forces and water resistance for water jet loom. GSW-7000 exhibited proper viscosity for sizing, high penetration ability and excellent adhesion to polyester yarn. It was possible to reduce the size pick-up to 70~80% of ordinary solvent-based sizing agent due to excellent adhesive strength of GSW-7000.

• Transactions of the Korean hydrogen and new energy society
• /
• v.15 no.4
• /
• pp.317-323
• /
• 2004

We fabricated a MISFET using Pd/NiCr gate for the detecting of hydrogen gas in the air and investigated its electrical characteristics. To improve stability and high concenntration sensitivity and remove the blister generated by the penetration of hydrogen atoms Pd/NiCr catalyst gate metal are used as dual gate. To reduce the gate drift voltage caused by the inflow of hydrogen, the gate insulators of sensing and reference FFET were constructed with double insulation layers of silicon dioxide and silicon nitride. The hydrogen response of MISFET were amplified with the difference of gate voltages of both MISFET. To minimize the drift and the noise, we used a OP177 operational amplifier. The sensitivity of the Pd/NiCr gate MISFET was lower than that of Pd/Pt gate MISFET, but it showed good stability and ability to detect high concentration hydrogen up to 1000ppm.

• Clinical and Experimental Reproductive Medicine
• /
• v.25 no.1
• /
• pp.1-8
• /
• 1998

To investigate the influences on semen parameters and fertilizing capacity of immunoglobulin (Ig) isotypes and regional distribution of antisperm antibody (ASA) on the human sperm surface. Sixty-seven ASA-positive patients were compared with 96 ASA-negative donors. ASAs in semen showed significant negative effects on both semen parameters and fertilizing capacity; in those with ASAs in the sperm head and/or tail, the reductions were significant. In the head as well as the tail, there was close correlation between fertilizing capacity and both IgG and IgA. Both semen parameters and fertilizing capacity are significantly affected by the presence of ASA in semen. In particular, antibodies IgG to sperm head and/or tail, and antibodies IgA to sperm tail appeared to have a highly detrimental effect on fertilizing capacity.

• Laser Solutions
• /
• v.18 no.1
• /
• pp.1-6
• /
• 2015

High welding speed and narrow weld seam are favorable for welding of magnesium alloy. Magnesium alloy is recommended for the smart frame because it has several advantages such as low density, high thermal conductivity, EMI shielding capability and good cast ability. This study is for the assembly welding of the magnesium smart frame with high productivity, good performance and low cost. The window for battery on AZ91D frame produced by die-casting was prepared by CNC machining. Corresponding AZ31 blank of 0.2mm thickness was prepared by die-blanking cut. All system set was fixed at the stationary bed but the laser beam was manipulated by scanner up-to 1,000mm/s speed. The weld joint between AZ31 sheet and AZ91D frame was welded by fiber laser on 850~1,000W output power. The joint showed penetration enough but some humping bead. The distortion by the weld heat was almost free because of the quick dissipation of the heat by small beam size and fast welding. Consequently, the thinner magnesium foil was assembled successfully to the magnesium frame of mobile phone.