• Geomechanics and Engineering
• /
• 제33권1호
• /
• pp.91-99
• /
• 2023

To test the effect of various pile tip shape series of model scale loading tests were carried out on test piles with special pile tips. Special pile tips were made using the 3D printer and were attached to the bottom end of the test pile for loading tests. The pile tips were made to have 30°, 45°, 60° inclined tips, as well as a rounded tip. The main objective of the test was to observe the effect of various pile tip shapes on settlement and penetrability of the pile. Moreover, a numerical model simulating the pile loading test carried out in this study was established and verified based on the loading test results. From this, the stress concentration around the pile tip was investigated. This will allow us to analyze the decrease of stress concentration around the pile tip which is the main cause of the pile tip damage during pile installation. However, modifying the pile tip shape will eventually increase the settlement of the pile. By estimating the degree of increase in pile settlement, the viability and the efficiency of the pile shape modification was judged. In addition, case studies on the effect of different pile tip shape and ground conditions on pile settlement and stress dispersion was conducted.

• 수산해양기술연구
• /
• 제50권4호
• /
• pp.511-519
• /
• 2014

This study is aimed to analyze the three-dimensional underwater irradiance using an optical simulation software and to clarify the propriety and operation method under considering luminous intensity distribution of the luring lamp and penetrability in the seawater, when we use the light diffuser type 300W high powered LED and the metal halide lamp (MHL) on a coastal squid jigging vessel in the 10-ton class, simultaneously. For their attenuation characteristics of each wavelength in relation to the sea, LED lamp was to be effective in the 1.9-fold at 50 m depth and 2.1-fold at 80 m for underwater irradiance more than MHL according to the power consumption. In addition, the underwater irradiance distribution using the LED and MHL combination was rather increased even when reducing total power usage up to 20% depending on the simulation with changing the configuration and lighting angle of the lamp. These results can be utilized as an evaluation method of the operation and performance of the LED lamp according to adjusting its arrangement and lighting angle.

• 한국전자통신학회논문지
• /
• 제8권6호
• /
• pp.923-931
• /
• 2013

RFID(Radio Frequency Identification)는 버스카드, 출입문 카드, 물류유통, 건축자재 관리 등 일상생활에서 다양하게 사용되는 태그의 일종으로 ID정보를 무선 주파수(RF, Radio Frequency)를 사용하여 인식하는 무선인식장치이다. RFID는 투과성과 인식률, 메모리 크기, 다중태그 인식률, 외부 오염 먼지, 외부 충격 등에 따라 크기와 성능이 달라지고, 이와 같은 요소들을 고려한 RFID 보호를 위한 패키징이 필요하다. 현재 RFID는 건축자재의 효과적인 관리를 위해서도 다양하게 사용되고 있는데, 건축자재에 RFID를 부착하기 위해서는 외부로 부터의 충격에 강건한 건축자재용 RFID 패키징 제작이 요구되고 있다. 본 논문에서는 외부 충격에 강하고, 고장 시 RFID의 교체가 가능하도록 패키징 틀과 본체를 분리하여 설계된 건축자재용 RFID 패키징을 제안한다. 제안된 RFID 패키징을 위한 상세한 설계도를 제시하였으며, 3D 프린터를 사용하여 설계된 패키징을 직접 제작하여 성능 평가를 실시하였다.

• Computers and Concrete
• /
• 제14권3호
• /
• pp.299-313
• /
• 2014

Effects of polypropylene (PP) fibers, steel fibers (SF) and hybrid on the properties of highstrength fiber reinforced self-consolidating concrete (HSFR-SCC) under different volume contents are investigated in this study. Comprehensive laboratory tests were conducted in order to evaluate both fresh and hardened properties of HSFR-SCC. Test results indicated that the fiber types and fiber contents greatly influenced concrete workability but it is possible to achieve self consolidating properties while adding the fiber types in concrete mixtures. Compressive strength, dynamic modulus of elasticity, and rigidity of concrete were affected by the addition as well as volume fraction of PP fibers. However, the properties of concrete were improved by the incorporation of SF. Splitting tensile and flexural strengths of concrete became increasingly less influenced by the inclusion of PP fibers and increasingly more influenced by the addition of SF. Besides, the inclusion of PP fibers resulted in the better efficiency in the improvement of toughness than SF. Furthermore, the inclusion of fibers did not have significant effect on the durability of the concrete. Results of electrical resistivity, chloride ion penetration and ultrasonic pulse velocity tests confirmed that HSFR-SCC had enough endurance against deterioration, lower chloride ion penetrability and minimum reinforcement corrosion rate.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.7-15
• /
• 2017

PURPOSES : Infiltration of moisture, polluted material, and deicer into concrete, accompanied by freeze and thaw can cause significant deterioration of concrete pavement. In order to protect concrete from deterioration, it is necessary to prevent the infiltration of these concrete external materials. The moisture-repellent agent, which is a surface treatment and maintenance material added to concrete structures to render them water resistant, has advantages such as prevention of water infiltration and security against air permeation. Nano-coat, which is referred to as silicon hydride, is typically used as a moisture-repellent agent. Therefore, in this study, an attempt is made to use penetration-type Nano-coat as an alternative in order to evaluate its applicability through environmental resistance tests. METHODS : This study aimed to evaluate the applicability of penetration-type Nano-coat, which can provide water repellency to concrete, in concrete pavements, through various environmental resistance tests such as freezing and thawing resistance, chloride ion penetration resistance, and surface scaling resistance tests. The applicability of penetration-type Nano-coat was demonstrated based on the specification of KS F 2711, KS F 2456, and ASTM C 672. RESULTS :In the case of penetration-type Nano-coat applied on sound concrete, an increase in concrete durability was demonstrated by the negligible chloride ion penetrability and the absence of scaling, as revealed by visual observation of the surface, after 50 cycles of scaling resistance test. In addition, test result of the application of penetration-type Nano-coat on deteriorated concrete established that concrete surface pretreated by grinding provided improved durability than non-treated concrete. CONCLUSIONS :This study indicates that penetration-type Nano-coat is applicable as an effective alternative, to increase the durability of concrete structures. In addition, it was known that pretreatment of deteriorated concrete surface, such as grinding, is required to improve the long-term performance of concrete pavement.

• Radiation Oncology Journal
• /
• 제5권2호
• /
• pp.119-129
• /
• 1987

With the introduction of X-rays of higher energy that have higher penetrability, it has become possible to treat the deep-seated tumor with increased local control rate. But at the same time it has incrased the damage to the deep seated organs, especially to the lung which is known to be the less radiotolerable tissue in the body. This study analyses the 66 patients who were exposed to the irradiation of the lung, and examines the development of radiation pneumonitis and its related factors. The results of the study are summarized as follows: 1, The 66 patients were consisted of 40 cases of lung cancer, 15 cases of breast cancer and 11 cases of mediastinal tumors. There were 37 males and 29 females with the male to female ratio 1.3: 1. A male to female ratio in the lung cancer was 3: 1. 2. Among 66 patients, 26 patients $(39\%)$ developed the radiographical changes of acute radiation pneumonitis and 13 out of 26 patients $(50\%)$ showed the clinical features of acute radiation pneumonitis. 3. The onest of acute radiation pneumonitis ranged from 10 days to 6 months after the completion of radiotherapy. 4. There was a statistically significant close relationship between the development of radiation pneumonitis and the radiation dose. 5. As the irradiated lung volume increased, the development of radiation pneumonitis increased. But the statistical significance was not strong. 6. The increased incidence of radiation pneumonitis was observed when the chemotherapy was given before or concomittantly with radiotherapy. 7 There was no significant correlation between the development of radiation pneumonitis and the age, smoking and the presence of underlying lung disease.

• 폴리머
• /
• 제35권4호
• /
• pp.325-331
• /
• 2011

침투 가능한 수형 모델 유체의 방정식을 고찰하는 다양한 범위의 입자 충전 분을 ${\phi}$ 및 척력적 에너지 상수 ${\varepsilon}^*$에 대하여 분자 동력학 방법을 이용한 전산 모사를 수행하였다. 전산 모사로부터 얻어진 결과는 문헌에 보고된 고침투 근사식 및 저침투 근사식으로 알려진 두 가지의 한계적 이론식들과 직접 비교하였다. 낮은 척력적 에너지를 갖는 ${\varepsilon}^*$ <3.0의 경우 전산 모사 결과는 이들 두 이론식들과 일치하였으나, 반면 입자간 상호 포텐셜 에너지가 입자 자체 평균 운동 에너지의 두 배 이상 높은 척력적 에너지를 갖는 ${\varepsilon}^*{\geqq}3.0$의 경우 이들 이론식들 모두 전산 모사 결과를 재현하지 못하였다. 이는 특히 높은 입자 밀도와 높은 척력적 에너지를 갖는 ${\phi}{\geqq}0.7$ 및 ${\varepsilon}^*$=6.0의 경우 입자들의 클라스터 형성 및 자체 입자 배제 부피에 따른 비연속적 크기 효과에 기인되었다.

• 한국지반환경공학회 논문집
• /
• 제24권6호
• /
• pp.13-20
• /
• 2023

본 연구는 강섬유(SF) 혼입률에 따른 고유동 흙막이 벽체 재료(RWM)의 역학적 성능 및 내구성을 평가하기 위한 것으로써, 흙막이 벽체 재료의 재료분리저항성, 유동성, 연행공기량을 확보하기 위하여 적정량의 고성능감수제(SP), 공기연행제(AEA) 및 증점 안정화제(VMA)를 사용하였다. 흙막이 벽체 재료 경화체의 압축 및 쪼갬 인장강도를 소정의 재령에서 측정하였으며, 흙막이 벽체 재료의 역학적 성능은 표면전기저항성 및 흡수율 실험을 통하여 고찰하였다. 또, 염소이온 침투저항성 및 동결융해 저항성 실험을 통하여 흙막이 벽체 재료의 내구성능을 고찰하였다. 실험결과에 의하면, 강섬유를 적용한 배합이 강섬유 무혼입 배합에 비하여 우수한 성능을 나타내었으며, 2% 적용 배합이 경제성 및 성능 관점에서 상대적으로 효과적인 것으로 관찰되었다. 따라서, 적절한 SF의 적용은 흙막이 벽체 재료의 성능 향상에 기여할 것으로 판단된다.

• 농약과학회지
• /
• 제14권3호
• /
• pp.272-279
• /
• 2010

KNF-1002는 strobilurin계 합성 살균 활성물질로 여러 가지 식물병에 대하여 예방효과가 우수한 것으로 보고되었지만, 작물의 경엽 침투성이 매우 약하여 보랴 흰가루병 등에 대한 치료효과는 거의 없는 것으로 나타났다. 따라서 Congo Red 방법을 이용하여 KNF-1002의 보리와 밀의 경엽 침투성과 부착량을 동시에 증진할 수 있는 물질을 선발하고 이를 이용하여 보리 흰가루병에 대한 방제 효과가 증진된 제제를 개발하고자 하였다. KNF-1002를 100 mg/L 함유하는 acetone 수용액으로 보리 잎에 분무하였을 때 24시간 동안 유효성분의 0.1%가 침투하였지만, heptaethylene glycol monooctadecenyl cther(OE-7), dodccacthylene glycol monohexadecyl ethcr(CE-12) 등의 계명활성제를 500 mg/L 첨가하였을 때는 침투율이 최고 48.5%까지 증가하였다. 계면활성제를 함유하는 KNF-1002 분무용 용액은 밀에 대해서도 침투성과 부착성을 매우 증진하였으며, 그 효과는 polyoxyethylene계 계면활성제의 지방족 알콜의 종류와 ethylene oxide 부가몰수에 따라 달랐다. 침투성과 부착량을 동시에 증진할 수 있는 보조제로써 nonacthylene glycol monododccyl ether(LE-9)틀 함유하는 KNF-1002 제제는 보리 흰가루병에 대한 방제효과를 뚜렷하게 증진하는 것으로 나타났다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제29권2호
• /
• pp.123-127
• /
• 2003

Chemical burns onto oral mucosa which are infrequent, may result from contact with a wide variety of chemical agents. The degree of injury depends on the chemical, its concentration, duration of contact, and the natural penetrability and resistance of the tissues involved. Chemicals do not usually "burn" in that they do not cause destruction by hyperthermic activity. Rather, they damage tissue by causing coagulation of protein by one of several processes, reduction, oxidation, desiccation, corrosion, or vesication. Paraquat(Gramoxon) is the most frequently agricultural chemicals that induce the severe toxic reactions onto the organs of human body in Korea. The toxic reaction are composed of pulmonary edema and fibrosis, formation of hyaline membrane, inflammatory reaction and bleeding tendency, owing to the cell damage by the production of superoxide radicals. The contents of essential treatment in paraquat intoxication are commonly airway and breathing maintenance, gastric lavage, much hydration and diuresis, hemoperfusion and medications for the removal of the chemicals and the prevention of various complications. The sedative oral dressings, such as, orabase ointment application, warm saline gargling, lidocaine viscous gargling and oral gargling by the mixed solutions(tetracycline, prednisolone and 10% dextrose water) are important for the improvement of chemical oral mucositis and the comfortable feeding of diet. The authors managed properly two cases of oral chemical mucositis that were occurred by the incorrect use of agricultural chemicals(paraquat) and report the cases with the review of literatures about care of the chemical intoxication and oral mucositis.