• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1099-1100
• /
• 2008

In this paper, we would like to introduce a simple and low cost wired pointing device by using a electromagnetic induction. A number of patents of Wacom describe electronic drawing devices or styluses. The movement of the stylus over a tablet is traced electronically and used applied to a resonant circuit in the stylus. Electromagnetic radiation emitted by the resonant circuit is detected by a sensing mechanism and location processing is used to locate the stylus. In this research, difference coil principle is used to detect the emitted radiation of the resonant circuit in the pen. This detection device shows good performance to detect the location of the pen on the tablet.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.100-104
• /
• 2005

Researchers of oriental color ink painting have concentrated on physical models such as brushes, papers, and ink diffusion. These models can be effective when painter depict a painting by tablet pen. If a painter has poor skill to use tablet pen or drawing ability, result should be not satisfied. In this paper, we propose an automatic painting method for oriental color ink painting. We use a computational approach to abstract landscape image and reproduce a painting by oriental color ink painting method. The reason why we use landscape image, landscape painting is a major theme of oriental ink painting.

• Journal of Korea Multimedia Society
• /
• v.14 no.5
• /
• pp.691-702
• /
• 2011

Recently, several researchers have attempted to combine human visual perception and computer graphics. Cole et. al. suggest the study results in which line drawing algorithm in computer graphics characterize the properties of line drawing made by artists. The paper also evaluates CG line drawing algorithms depending on whether people recognize effectively specific 3D shape from the image made by those CG line drawing algorithms. However, human recognizes the shape of objects more effectively in image made by BRDF shading model than line drawing algorithm. It means that the shading factor is important to recognize shape with human perception. In this paper, we analyze the correlation between shading made by human artists and that made by CG shading algorithms. The study is to characterize the mathematical properties of artists' shading and CG shading. This type of analysis can guide the future development of new CG shading algorithm in computer graphics for the purpose of shape perception.

• Journal of Korea Multimedia Society
• /
• v.6 no.4
• /
• pp.565-575
• /
• 2003

This paper proposed context based annotation model and annotation ambiguity correction methods. The proposed model provides various annotation types, semantic models, and pen-based free drawing interface. Annotation correction method that is specifically based on the context which includes various textual and structure information between free-form marking and annotation. Also, interface for XML environment using the proposed model and correction methods is proposed and possibilities of application is looked at. The results from the implementation of the proposed method show that the annotated areas included in the free-form marking information are more accurate, achieving more accurate exchange results amongst multiple users in a heterogeneous document environment

• Journal of KIISE:Software and Applications
• /
• v.33 no.2
• /
• pp.231-242
• /
• 2006

Accurate proofreading Interface requires resolving the ambiguity that occurs when the system determines the relations between the free-form by the user and editing scopes of the document. Proofreading for structure documents such as XML/XHTML involves modification of document structures and modified document also should follow the pre-defined DTD. This paper present a CPI (Context-based Proofreading Interface) based on the XML. The CPI supports free-form drawing of correction marks and provides context-based scope recognition and revision methods. CPI provides both implicit and explicit modification methods for document structures. As a result, the correction mark information produced in this paper includes more accurate scope information than that in other systems.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.425-428
• /
• 2009

We have researched and developed the caricature generation system PICASSO. PICASSO outputs the deformed facial caricature by comparing input face with prepared mean face. We specialized it as PICASSO-2 for exhibiting a robot at Aichi EXPO2005. This robot enforced by PICASSO-2 drew a facial caricature on the shrimp rice cracker with the laser pen. We have been recently exhibiting another revised robot characterized by a brush drawing. This system takes a couple of facial images with CCD camera, extracts the facial features from the images, and generates the facial caricature in real time. We experimentally evaluated the performance of the caricatures using a lot of data taken in Aichi EXPO2005. As a result it was obvious that this system were not sufficient in accuracy of eyebrow region extraction and mouth detection. In this paper, we propose the improved methods for eyebrow region extraction and mouth detection.

• The Korean Journal of Nuclear Medicine
• /
• v.21 no.1
• /
• pp.9-16
• /
• 1987

It is well-known that hepatic scintigraphv have been found to be less sensitive and specific in the detection of the diffuse hepatocellular diseases than that of the space-occupying lesions. To obtain the higher diagnostic specificity and sensitivity, we, using the computer quantitation, have attempted to analyze hepatic and extrahepatic $^{99m}Tc-tin$ colloid uptake patterns in various diffuse hepatocellular diseases retrospectively. The studied groups consisted of 116 cases of normal, 67 cases of acute hepatitis, 112 cases of chronic hepatitis, 61 cases of liver cirrhosis, 47 cases of fatty liver, 12 cases of hepatoma and 9 cases of metastasis, making total 424 cases. Scintigraphic imagings were obtained in the anterior, right lateral and posterior projections using high-resolution collimation, and simultaneously these gamma data were acquisited into the computer system. Both large region of interest (ROI) using light pen and ROI computer program were placed over right lobe, left lobe of liver, spleen and cardiac blood pool. Total counts in ROI were divided by the number of pixels in the ROI, and mean count rate per pixels calculated. Mean right-lobe counts were divded by mean-left lobe counts to determine right-to-left hepatic lobe ratio and mean spleen counts were divided by mean liver counts to determine spleen to liver ratio. The results were as follows. 1) Of 424 cases, 292 were male and 132 were female. The majority of age distribution was in $30\sim49$ (54.5%). 2) Inter-observer between two independant operators and inter-method between drawing by light-pen and ROI computer program variations were not significant. 3) The uptake count values (per pixel) determined at each area in normal group were $106.53{\pm}18.35$ in right lobe, $79.00{\pm}13.82$ in left lobe, $17.52{\pm}8.31$ in spleen and $8.09{\pm}3.43$ in cardiac blood pool. 4) In liver cirrhosis, right lobe uptake was decreased but spleen and cardiac blood pool uptakes were increased (p<0.01). 5) Right-to-left hepatic lobe uptake ratio was $1.37{\pm}0.24$ in normal group and significantly low in chronic hepatitis, liver cirrhosis and fatty liver, and more or less low in acute hepatitis. 6) Spleen-to-right hepatic lobe uptake ratio was $0.17{\pm}0.09$ in normal group and high in chronic hepatitis and liver cirrhosis. 7) The computer-quantitation of hepatic and extrahepatic uptake patterns thought to be sensitive and useful method in the interpretation of liver scintigram.

• Journal of Elementary Mathematics Education in Korea
• /
• v.18 no.3
• /
• pp.459-474
• /
• 2014

The purpose of this study was to investigate the effects of mathematical instruction using GSP program on the symmetrical figures learning and self-directed learning attitude. According to the pretest result, the experiment group and the comparison group showed to be homogeneous groups. The experiment group has learned symmetrical figures for 9 hours using the GSP program and the comparison group has learned for 9 hours using the traditional method(paper and pen lesson). As the posttests, self-directed learning attitude test and symmetry figure understanding test were performed. The results obtained in this research are as follows; First, there was a significant difference in symmetry figure understanding test between the experiment group which learned through GSP program and the comparison group which learned through traditional method. Since there showed a very high achievement in the experiment group which learned using GSP, it can be inferred that GSP was very effective in the lessons of symmetrical movements. Second, there was a significant difference in self-directed learning attitude test between the experiment group and the comparison group. This seems to be because the length of the sides of the figures, size of the angles of the figures etc can be verified instantly and the students can correct by themselves and give feedbacks when they use GSP program. Students preferred drawing using the GSP over drawing using rulers and pencils, and they showed interest in the GSP program and they did not have burden in being wrong in their study and studied in various methods. And as they become familiar with the GSP program, they even studied other contents beyond the scope presented in the textbook.

• Journal of Korean Medical classics
• /
• v.22 no.2
• /
• pp.85-99
• /
• 2009

This book was completed in the 33rd year of Gang-hui-gapsul(康熙 甲戌) in the Cheong(淸) dynasty(1694), and was first inscribed in the 55th year of Geonryung(乾隆). In this first edition named 'Daechudangbon(大雅堂本)', his descendant Jinbonghui(陳鳳輝) wrote the postscript. There are also other editions such as 'Ga-gyeong-ganchwihyeondangbon(嘉慶間聚賢堂本)', 'Wimundanggeonsangbon(緯文堂巾箱本)' and 'Guangseo-ganseonseongdangbon(光緒間善成堂本)' Second, this book was called "Oe-gwabirok(外科秘錄)" and used the pen name 'Gibaekchunsasojeon(岐伯天師所傳)'. There are 16 volumes in total. The beginning of volume one, is a drawing of the 14 meridians. Volumes 1$\sim$4 are on the symptoms and treatment of abscesses and sores and ulcers[癰疽瘡瘍]. Volumes 5$\sim$13 are on surgery, dermatology and 156 diseases such as wounds by contusion, sharp objects and insects and beasts[跌撲, 金刃, 蟲獸傷]. Volumes 14$\sim$16 list the internal treatments, external medicine, acupuncture and moxibustion and surgery of sores and ulcers. Third, the book stressed early detection and treatment of diseases, emphasized inner resolving[內消] being cautious about using medicine, and further deepened the syndrome differentiation and treatment[辨證施治] of sores and ulcers[瘡瘍] by dividing fire toxin(火毒) into Eumhwa and Yanghwa(陰火/陽火). Also, it established the cause of sores and ulcers development as the deficiency of Gi(氣) and blood[血] and focused especially on the liver and kidney's involvement in the process. It also asserted that the pathogen[邪] is the tip[標], so one should eliminate and reinforce[攻補] to balance it out. The sore and ulcer surgery[瘡瘍外科] part is mostly based on detoxifying[解毒] and resolving[消散]. Although the meridians were mentioned, they were not emphasized, while moxibustion treatment of sores and ulcers[瘡瘍] were thoroughly analyzed. Also, of all 550 formulas in this book, 90% are experience-based which frequently use Geum-eunhwa(金銀花), Pogong-yeong(蒲公英) and Jahwajijeong(紫花地丁). The usages are unique, and the formulas have good adaptability. The symptoms of the diseases are explained first, followed by according main and sub treatments.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1295-1302
• /
• 2021

As the market size of 3D printers increases, the precision of the printout and the speed of operation by the motor are very important issues. In this parer, G-code of each output was generated using a CURA program to compare whether the output of the PLC equipment is the same as that of the Arduino CNC. And after conversion to NC File, a pen was attached to each device to output a result to A4 paper. As a result, the output time was measured to be 1m 39s for PLC equipment and 2m 5s for Arduino CNC. In addition, it was confirmed that the 2D output was equally from the two equipments.