• Journal of Powder Materials
• /
• v.22 no.4
• /
• pp.271-277
• /
• 2015

As wrought stainless steel, sintered stainless steel (STS) has excellent high-temperature anti-corrosion even at high temperature of $800^{\circ}C$ and exhibit corrosion resistance in air. The oxidation behavior and oxidation mechanism of the sintered 316L stainless was reported at the high temperature in our previous study. In this study, the effects of additives on high-temperature corrosion resistances were investigated above $800^{\circ}C$ at the various oxides ($SiO_2$, $Al_2O_3$, MgO and $Y_2O_3$) added STS respectively as an oxidation inhibitor. The morphology of the oxide layers were observed by SEM and the oxides phase and composition were confirmed by XRD and EDX. As a result, the weight of STS 316L sintered body increased sharply at $1000^{\circ}C$ and the relative density of specimen decreased as metallic oxide addition increased. Compared with STS 316L sintered parts, weight change ratio corresponding to different oxidation time at $900^{\circ}C$ and $1000^{\circ}C$, decreased gradually with the addition of metallic oxide. The best corrosion resistance properties of STS could be improved in case of using $Y_2O_3$. The oxidation rate was diminished dramatically by suppression the peeling on oxide layers at $Y_2O_3$ added sintered stainless steel.

• Journal of Aerospace System Engineering
• /
• v.13 no.2
• /
• pp.43-50
• /
• 2019

Satellite and aircraft components are greatly affected by the possibility for missions and safety due to temperature effects. In the field of fuel cells, research is actively carried out for UAV. For the efficiency and stability of the fuel cells, the temperature for operations must be confirmed. In this paper, a smart paint was fabricated with $BaTiO_3$ and $SrTiO_3$ ceramics in order to take advantage of the rapid characteristics of the PTC thermistor, which is the resistance changes abruptly above the Curie point. A coating agent was prepared to prevent the paint from peeling off the samples and the coated models were checked for resistance changes. Moreover, the resistance change of the $BaTiO_3$ and $SrTiO_3$ with temperature conditions was measured before and after coating.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.2
• /
• pp.43-48
• /
• 2022

Effect of temperature/humidity (T/H) treatment conditions on the peel strength of screen-printed Ag/polyimide (PI) structures was evaluated by peeling PI films in 90° peel test. Initial peel strength was 25.99±1.47 gf/mm, and then decreased to 6.05±0.54 gf/mm after 500 h at 85℃/85% relative humidity T/H condition. And, the peeled locus was changed from Ag/PI interface to shallow cohesive inside PI near interface. X-ray photoelectron spectroscopy analysis on the peeled surfaces showed that the long-term moisture penetration into the Ag/PI interface during T/H treatment led to hydrolytic degradation of PI to form weak boundary layer inside PI near Ag/PI interface, which are responsible for large decrease in peel strength.

• The Korean Journal of Pesticide Science
• /
• v.20 no.1
• /
• pp.14-22
• /
• 2016

A trial of combining and quantifying the effects of food processing on various pesticides was carried out using a meta-analysis. In this study, weighted mean response ratios and confidence intervals about the reduction of pesticide residue levels in fruits and vegetables treated with various food processing techniques were calculated using a statistical tool of meta-analysis. The weighted mean response ratios for tap water washing, peeling, blanching (boiling) and oven drying were 0.52, 0.14, 0.34 and 0.46, respectively. Among the food processing methods, peeling showed the greatest effect on the reduction of pesticide residues. Pearsons's correlation coefficient (r=0.624) between weighted mean response ratios and octanolwater partition coefficients ($logP_{ow}$) for twelve pesticides processed with tap water washing was confirmed as having a positive correlation in the range of significance level of 0.05 (p=0.03). This means that a pesticide having the higher value of $logP_{ow}$ was observed as showing a higher weighted mean response ratio. These results could be used effectively as a reference data for processing factor in risk assessment and as an information for consumers on how to reduce pesticide residues in agricultural products.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.28 no.4
• /
• pp.390-395
• /
• 2014

Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, Listeria. monocytogenes and Bacillus cereus are pathogenic bacteria that should not be detected in cosmetics and foodstuffs. Therefore, we first investigated the antimicrobial activities of extracts of Scutellariae Radix(SR), Coptidis Rhizoma (CR) and salicylic acid(SA) in these pathogenic microorganisms. Although SA has been known to exhibit anti-inflammation and antimicrobial activity against pathogenic microorganisms, a high concentration of SA may cause serious side effects such as skin redness, skin burning, peeling or tissue damage. Hence, we focused on diminishing side effects followed by treatment of a high concentration of SA and investigated whether the combinations of SA with various concentrations(25-400 mg/mL), SR and CR with a concentration(100 mg/mL) which did not show antimicrobial activity against E. coli and P. aeruginosa exhibited meaningful antimicrobial effect against both strains. In our results, the combinations of SA with the lowest concentration(25 mg/mL), SR(100 mg/mL) and CR(100 mg/mL) exhibited significant antimicrobial activity against E.coli in comparison to SA alone(25 mg/mL) showing no antimicrobial activity. Moreover, the combinations of SA (100 mg/mL), SR and CR showed seven times higher antimicrobial activity against E. coli than SA alone(100 mg/mL) and exhibited a significant antimicrobial activity in comparison to ampicilin (p<0.05). The combinations of SA(100 mg/mL), SR and CR showed two times higher antimicrobial activity against P. aeruginosa than SA alone. Therefore, these results indicated that the combinations of SR, CR and SA with low concentration expressed the synergistic antimicrobial effect against E. coli and P. aeruginosa and showed great potential as an antimicrobial agent.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.4
• /
• pp.413-420
• /
• 2016

Hydroxy acid has been used to enhance anti-aging and skin moisturization by peeling effect on the skin stratum corneum, and thus it has been widely used in topical products and cosmetic products. Among them, the effect that appears most effectively in a short period of time has been reported to be effected by the pH of the cosmetic formulations. However, there are many difficulties in use due to irritation caused by pH and concerns about side effects. The purpose of this study was to evaluate the effect of applying cosmetics with (1) varying concentrations, (2) types and (3) pH of hydroxy acid on human skin. 22 healthy adults were stained with DHA (dihydroxyacetone) and DC (dansyl chloride) on the forearm, and the skin exfoliation effect was measured after application of the test products. (1) The application of GA (glycolic acid) increased the desquamation by concentration dependent. (2) the test product prepared with neutral pH showed no exfoliation effect. In contrast, SA (salicylic acid) showed a statistically significant exfoliation effect at both acidic pH and neutral pH. (3) The neutral pH SA showed excellent exfoliation effect on bot DHA and DC stained stratum corneum. These results suggest that it is possible to manufacture safe cosmetics without damaging the skin barrier, providing an opportunity to use cosmetics that are expected to exfoliate to people, whose skin is sensitive to pH.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.478-478
• /
• 2012

Recently, there are many researches in order to increase the deposition rate (D/R) and improve film uniformity and quality in the deposition of microcrystalline silicon thin film. These two factors are the most important issues in the fabrication of the thin film solar cell, and for the purpose of that, several process conditions, including the large area electrode (more than 1.1 X 1.3 (m2)), higher pressure (1 ~ 10 (Torr)), and very high frequency regime (VHF, 40 ~ 100 (MHz)), have been needed. But, in the case of large-area capacitively coupled discharges (CCP) driven at frequencies higher than the usual RF (13.56 (MHz)) frequency, the standing wave and skin effects should be the critical problems for obtaining the good plasma uniformity, and the ion damage on the thin film layer due to the high voltage between the substrate and the bulk plasma might cause the defects which degrade the film quality. In this study, we will propose the new concept of the large-area multi-electrode (a new multi-electrode concept for the large-area plasma source), which consists of a series of electrodes and grounds arranged by turns. The experimental results with this new electrode showed the processing performances of high D/R (1 ~ 2 (nm/sec)), controllable crystallinity (~70% and controllable), and good uniformity (less than 10%) at the conditions of the relatively high frequency of 40 MHz in the large-area electrode of 280 X 540 mm2. And, we also observed the SEM images of the deposited thin film at the conditions of peeling, normal microcrystalline, and powder formation, and discussed the mechanisms of the crystal formation and voids generation in the film in order to try the enhancement of the film quality compared to the cases of normal VHF capacitive discharges. Also, we will discuss the relation between the processing parameters (including gap length between electrode and substrate, operating pressure) and the processing results (D/R and crystallinity) with the process condition map for ${\mu}c$-Si:H formation at a fixed input power and gas flow rate. Finally, we will discuss the potential of the multi-electrode of the 3.5G-class large-area plasma processing (650 X 550 (mm2) to the possibility of the expansion of the new electrode concept to 8G class large-area plasma processing and the additional issues in order to improve the process efficiency.

• Korean Journal of Food Science and Technology
• /
• v.35 no.1
• /
• pp.84-91
• /
• 2003

The effects of different dehydration conditions for the removal of ginkgo nut inner coat on peeled ginkgo nuts were examined using physical and sensory methods. Dehydration of ginkgo nuts at $90^{\circ}C$ for 120 min resulted in greater hardness, lightness (L), redness (a), yellowness (b), and firmness. Higher roasted flavor and larger holes were observed with dehydration at $150^{\circ}C$ for 30 min and greater cooked ginkgo flavor and green color with dehydration at $120^{\circ}C$ for 50 min. Based on these findings, dehydration at $120^{\circ}C$ for 50 min was determined as the adequate hot air dehydration condition for the removal of ginkgo nut inner coat. Ginkgo nuts stored at $25^{\circ}C$ maintained overall desirability up to 4 weeks. In ginkgo nuts stored at $4^{\circ}C$, all sensory desirabilities evaluated were reasonably high until 60 days of storage; desirability of appearance decreased moderately at 80 days of storage, and appearance became very undesirable at 180 days. Ginkgo nuts stored at $-18^{\circ}C$ showed little changes until 10 months of storage, but slight decreases in overall desirability, flavor, and texture were noted at 12 months.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.4
• /
• pp.667-671
• /
• 2015

This study investigated the antioxidant capacities and inhibitory activity of peeled lotus root (Nelumbo nucifera) as a food material on angiotension-converting enzyme (ACE). The antioxidant effects on total polyphenol and total flavonoid contents were not signicant. However, DPPH radical scavenging activity decreased from 85.07% to 80.70% by peeled treatment. SOD-like activity decreased from 20.84% to 17.97%, and ACE inhibitory activity decreased from 53.4% to 50.1% by peeled treatement. Thus, consumption of non-peeled lotus root should increase.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.84-84
• /
• 2012

소자가 고집적화 됨에 따라, 비저항이 낮고 electro migration (EM), Stress Migration (SM) 특성이 우수한 구리(Cu)를 배선재료로서 사용하고 있다. 그러나, 구리는 Si과 $SiO_2$의 내부로 확산이 빠르게 일어나, Si 소자 내부에 deep donor level을 형성하고, 누설 전류를 증가시키는 등 소자의 성능을 저하시킬 수 있는 문제점을 가지고 있다. 그러나, electroplating 을 이용하여 증착한 Cu 박막은 일반적으로 확산 방지막으로 쓰이는 TiN, TaN, 등의 물질과의 접착 (adhesion) 특성이 나쁘다. 따라서, Cu CMP 에서 증착된 Cu 박막의 벗겨지거나(peeling), EM or SM 저항성 저하 등의 배선에서의 reliability 문제를 야기하게된다. 따라서 Cu 와 접착 특성이 좋은 새로운 확산방지막 또는 adhesion layer의 필요성이 대두되고 있다. 본 연구에서는 이러한 Cu 배선에서의 접착성 문제를 해결하고자 Metal organic chemical vapor deposition (MOCVD)을 이용하여 제조한 코발트(Co) 박막을 $Cu/TaN_x$ 사이의 접착력 개선을 위한 adhesion layer로 적용하려는 시도를 하였다. Co는 비저항이 낮고, Cu 와 adhesion이 좋으며, Cu direct electroplating 이 가능하다는 장점을 가지고 있다. 하지만, 수소 분위기에서 $C_{12}H_{10}O_6(Co)_2$ (dicobalt hexacarbonyl tert-butylacetylene, CCTBA) 전구체에 의한 MOCVD Co 박막의 경우 탄소, 산소와 같은 불순물이 다량 함유되어 있어, 비저항, surface roughness 가 높아지게 된다. 따라서 구리 전착 초기에 구리의 핵 생성(nucleation)을 저해하고 핵 생성 후에도 응집(agglomeration)이 발생하여 연속적이고 얇은 구리막 형성을 방해한다. 이를 해결하기 위해, MOCVD Co 박막 증착 시 수소 반응 가스에 암모니아를 추가로 주입하여, 수소/암모니아의 분압을 1:1, 1:6, 1:10으로 변화시켜 $Co/TaN_x$ 박막의 특성을 비교 분석하였다. 각각의 수소/암모니아 분압에 따른 $Co/TaN_x$ 박막을 TEM (Transmission electron microscopy), XRD (X-ray diffraction), AES (Auger electron spectroscopy)를 통해 물성 및 조성을 분석하였고, AFM (Atomic force microscopy)를 이용하여, surface roughness를 측정하였다. 실험 결과, $Co/TaN_x$ 박막은 수소/암모니아 분압 1:6에서 90 ${\mu}{\Omega}-cm$의 낮은 비저항과 0.97 nm 의 낮은 surface roughness 를 가졌다. 뿐만 아니라, MOCVD 에 의해 증착된 Co 박막이4-6 % concentration 의 탄소 및 산소 함량을 가지는 것으로 나타났고, 24nm 크기의 trench 기판 위에 약 6nm의 $Co/TaN_x$ 박막이 매우 균일하게 형성된 것을 확인 할 수 있었다. 이러한 결과들은, 향후 $Co/TaN_x$ 박막이 Cu direct electroplating 공정이 가능한 diffusion barrier로서 성공적으로 사용될 수 있음을 보여준다.