• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.568-573
• /
• 2010

Adhesive strength was evaluated for the polyester fabric treated with various concentration of polymeric isocyanate to introduce functional group on the surface. Also experiments were performed to find out the type of latex, F/R mole ratio, and FR resin/latex weight ratio for the RFL solution to optimize adhesion between HNBR compound and the treated polyester fabric. Optimum adhesion strength was obtained when 7 wt% of the concentration of polymeric isocyanate, NBR latex because of the compatibility of HNBR compound, 1/1 of F/R mole ratio, and 20 wt% of FR resin/latex were applied. Optimum cure temperature for the RFL solution was $200^{\circ}C$ according to the results of peel test and the reason was determined by analyzing the ATR FTIR spectra of the RF resin according to the curing temperature.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.3
• /
• pp.133-138
• /
• 2013

Acrylonitrile-butadiene-styrene (ABS) plastic is a polymer material extensively used in electrical and electronic applications. Nickel (Ni) thin film was deposited on ABS by electroless plating, after its surface was treated and modified with atmospheric plasma generated by means of dielectric barrier discharges (DBDs) in air. The method in this study was developed as a pre-treatment for electroless plating using DBDs, and is a dry process featuring fewer processing steps and more environmentally friendliness than the chemical method. After ABS surfaces were modified, surface morphologies were observed using a scanning electron microscope (SEM) to check for any physical changes of the surfaces. Cross-sectional SEM images were taken to observe the binding characteristics between metallic films and ABS after metal plating. According to the SEM images, the depths of ABS by plasma are shallow compared to those modified by chemically treatment. The static contact angles were measured with deionized (DI) water droplets on the modified surfaces in order to observe for any changes in chemical activities and wettability. The surfaces modified by plasma showed smaller contact angles, and their modified states lasted longer than those modified by chemical etching. Adhesion strengths were measured using 3M tape (3M 810D standard) and by 90° peel-off tests. The peel-off test revealed the stronger adhesion of the Ni films on the plasma-modified surfaces than on the chemically modified surfaces. Thermal shock test was performed by changing the temperature drastically to see if any detachment of Ni film from ABS would occur due to the differences in thermal expansion coefficients between them. Only for the plasma-treated samples showed no separation of the Ni films from the ABS surfaces in tests. The adhesion strengths of metallic films on the ABS processed by the method developed in this study are better than those of the chemically processed films.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.5
• /
• pp.445-450
• /
• 2011

We studied the adhesion characteristics of polymer films (PC, PET, EVA) treated by atmospheric pressure plasma. The process parameters were the frequency, gas flow, and treatment time; we studied the effects of these parameters on the adhesion characteristics of the polymer materials. We used de-ionized water and diiodomethane as the polar and nonpolar solvents, respectively, for measuring the contact angles, and subsequently calculated the surface free energy of each polymer film. The adhesion characteristics were studied by carrying out a $180^{\circ}$ peel-off test. The polymer films treated with plasma developed a hydrophilic surface, which led to increased surface free energy and improved adhesion properties. From the results for contact angle, surface free energy, and adhesion strength, we obtained the optimal plasma-treatment conditions.

• Polymer(Korea)
• /
• v.31 no.2
• /
• pp.130-135
• /
• 2007

To enhance the thermo-mechanical properties of polyimide films which have potential application for the FCCL, we have synthesized the poly (amic acid) s composed of 4-components PMDA/BTDA and PDA/ODA as monomer system, u4 then they were effectively converted into 4-component polyimide films by thermal imidization process. It has been found that CTE values in the range of $100\sim200^{\circ}C$ decreased with the amount of PDA, which also caused 36% and 59% increases in tensile modulus and strength respectively. And also, peel test results on 3-layered copper clad laminate using 4-component polyimide films showed excellent adhesion strength above 1.8 kgf/cm. On the basis of obtained results it can be concluded that 4-component polyimide films may be applied for the high performance FCCL base films.

• Food Science of Animal Resources
• /
• v.20 no.2
• /
• pp.93-100
• /
• 2000

Effects of onion peel (OP) components (quercetin and rutin) in press ham on TBARS, pH, redness (a*) and flavor (panel test) were investigated during cold storage. TBARS in OP samples of high concentration was significantly (P〈0.05) lower than control during cold storage. This result suggests that OP components have an antioxidant activity in press ham. Also, redness of OP samples was significantly (P〈0.05) higher than control after three weeks of cold storage. Cured ham redness could be improved through lower pH of OP samples compared to that of control. However, flavor score of OP samples was not significantly (P〉0.05) different with control during cold storage. It could be possible that OP components plays role as an antioxidant without any negative effects on plavor of press ham.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.4
• /
• pp.461-469
• /
• 2010

Polyurethane adhesive is used in various fields as flexible packaging materials including a food packaging field. Therefore, the purpose of this study is synthesis of polyurethane adhesive which uses aliphatic isocyanate, and compares with aromatic isocyanate. The isocyanates for this test are toluene-2,4-diisocyanate(TDI), hexamethylene diisocyanate(HDI), 4,4-dicyclohexyl ethane diisocyanate($H_{12}MDI$), and isophorone diisocyanate(IPDI). And, the effect of any other diisocyanate are evaluated by several methods as for curing rate test, accelerate weathering test, and peel strength test. The polyurethane adhesive using curing catalyst and HDI has adhesion strength of about 560 g/15 mm between aluminium foil and nylon, about 1,520 g/15 mm between nylon and CPP. Those parameters are similar to polyurethane adhesive with TDI. Also, in case of curing rate, those are similar to TDI type polyurethane adhesive. Moreover, data of ${\Delta}E$ as color variation by QUV tester is equal to 4.12, as 48% against those of TDI type.

• Journal of Adhesion and Interface
• /
• v.12 no.3
• /
• pp.99-104
• /
• 2011

Currently, automotive pre-primed coatings has been developed to overcome environmental regulations and to reduce manufacturing cost in automotive industry. By these reasons, an automotive pre-primed system has been investigated to remove the wash and pre-treatment process using a roll coating application. It is required to develop non-weldable pre-primed system for automotive structural adhesives, because pre-primed sheet coated with organic compounds is hard to be assembled by welding process. Primer 1 (polyester type) and primer 2 (urethane type) were designed to satisfy flexibility and formability for non-weldable pre-primed system. According to the results of physical property test of the primers, adhesion test such as single-lap shear test and T-peel test, primer 1 (polyester type) had better physical properties such as pencil hardness, solvent resistance, flexibility and adhesion with automotive adhesive than that of primer 2 (polyurethane type). In addition, the possibility of the non-weldable pre-primed system was applicable to automotive assembly process in place of welding process.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.3
• /
• pp.442-450
• /
• 2011

Numerous studies have suggested that dietary flavonoids contribute to prevent cardiovascular disease. Onion contains many functional phytochemicals such as quercetin. The aim of this study was to examine whether onion peel extracts supplementation affect blood lipid profiles and blood coagulation in animal model. Total 48 Sprague-Dawley male rats at 5 weeks old were divided into 6 groups with different diets(C: control, HF: high fat diet, HFOE 0.01%: high fat+onion peel extract 0.01% diet, HFOE 0.02%, HFOE 0.05%, HFOE 0.1%) for 8 weeks. Onion peel extract supplementation significantly decreased serum levels of LDL-cholesterol and increased HDL-cholesterol, while total cholesterol and triglyceride levels were not affected. Hematological parameters(hematocrit, white blood cell, red blood cell, and platelet count) and blood coagulation parameters(prothrombin time, activated partial thromboplastin time, thrombin time, and fibrinogen) were not significantly different among 6 groups. However, activated partial thromboplastin time of HFOE 0.05% group was significantly longer than that of HF group. These results indicate that onion peel extract supplementation displays hypocholestrolemic effects but does not seem to have anti-coagulation effects in high fat fed SD rats.

• Journal of Welding and Joining
• /
• v.21 no.5
• /
• pp.513-517
• /
• 2003

Resistance welding processes are widely used in automotive applications. In particular, Mash-Seam resistance welding is typically used in Tailored Blank process. If spot welds are changed to a continuous weld, it's easy to reduce noise and to be more stable in cars. A arc welding, laser welding, seam welding using wheel electrode are available to make continuous welds on a car body, but they demand operator with advanced skills and expensive cost to develop. Therefore, flat electrode continuous mash-seam resistance welding process has been used to improve the weak points in currently available system in lap seam welding. This developed process has much more strength and air tightability, and also has much better plastic workability than laser welding. Moreover, commercial RSW machine can be readily used in this welding process.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.3
• /
• pp.8-13
• /
• 2002

In order to obtain the basic informations for the development of high strength and high weldability aluminum alloy sheets, the experimental study was carried out to evaluate resistance spot welding characteristics and welding parameters (welding current, welding time, electrode force) far the aluminum alloy sheets. The mechanical properties of spot weld of aluminum alloy were evaluated by tensile shear test and by peel test at room temperature and also the welding possible zone was established through variation of current electrode force and welding time.