• Journal of the Korean Vacuum Society
• /
• v.16 no.2
• /
• pp.79-90
• /
• 2007

Prototype of $800{\ell}$ vacuum web coater (Vic Mama) consisting of ion source with low energy less than 250 eV for high speed surface modification and 4 magnetron sputter cathodes was designed and constructed. Its performance was evaluated through fabricating the adhesiveless flexible copper clad laminate (FCCL). Pumping speed was monitored in both upper noncoating zone pumped down by 2 turbo pumps with 2000 l/sec pumping speed and lower surface modification and sputter zone vacuumed by turbo pumps with 450 1/sec and 1300 1/sec pumping speed respectively. Ion current density, plasma density, and uniformity of ion beam current were measured using Faraday cup and the distribution of magnetic field and erosion efficiency of sputter target were also investigated. With the irradiation of ion beams on polyimide (Kapton-E, $38{\mu}m$) at different fluences, the change of wetting angle of the deionized water to polyimide surface and those of surface chemical bonding were analyzed by wetting anglometer and x-ray photoelectron spectroscopy. After investigating the deposition rate of Ni-Cr tie layer and Cu layer was investigated with the variations of roll speed and input power to sputter cathode. FCCL fabricated by sputter and electrodeposition method and characterized in terms of the peel strength, thermal and chemical stability.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.3
• /
• pp.253-259
• /
• 2008

Soil environmental conditions can affect nutrient availability during growth stage of tree fruit. We investigated the cause of disorderd fruit by the influence of soil chemical properties in orchard soil, composition of mineral nutrient in leaves and fruit to occur physiological disorderd fruit at four locations (Ulsan, Gyeongju, Pyeongtaek, Ansung) compared to healthy. There were significantly different (P=0.05) in exchangeable Ca, K, Mg and total nitrogen content in orchard soil between physiological disordered fruit and healthy fruit. The exchangeable Ca content in orchard soil caused by physiological disordered fruit was statistically lower than that of healthy fruit. However, exchangeable K, Mg and total nitrogen contents were higher than that healthy (P=0.05). There was a significant difference (P=0.05) in Ca content between physiological disordered fruit and healthy. Ca content in fruit flesh of physiological disorderedfruit was statistically lower than that of healthy. The physiological disordered fruit was a higher ratio of Mg/Ca in fruit flesh and peel compared to healthy fruit and also the ratios of N/Ca and K/Ca in a leaf were higher. The negative correlation between Ca and K, and Ca and Mg was detected in the fruit flesh of physiological disordered fruit. Therefore, we concluded that insufficient Ca content in fruit may cause 'the physiological disorder' pomelo disease and high content of N, exchangeable K and Mg ion in the soil solution might be disturbs exchangeable Ca ion to be absorbed in fruit.

• Journal of the Korean Ceramic Society
• /
• v.41 no.10 s.269
• /
• pp.728-734
• /
• 2004

The effect of microstructure of WC-Co substrates which have different WC grain sizes from submicron to 5 $\mu$m on the diamond-substrate adhesion strength was investigated. The substrates were pre-treated by two methods : chemical etching with Murakami's solution and subsequently with $H_2SO_4$, and thermal heat-treatment. The adhesion strength was estimated by degree of peeling after Rockwell indentation. Diamond films of 20 $\mu$m thickness deposited on the heat-treated substrates showed an excellent adhesion strength at the load of 100 kg, which ascribed to the large and elongated WC grains. However, the cutting edge of insert was deformed after heat treatment and the surface morphology of heat treated substrate strongly affected on the surface roughness of the deposited diamond films. On the contrary, the diamond film of 10 $\mu$m in thickness on the chemically etched substrates of average WC grain size over 2 $\mu$m showed good adhesion strength enough not to peel-off under a load of 60 kg. Especially, the substrate of average WC grain size over 5 $\mu$m exhibited much improved reliability of adhesion comparing with the substrate of average grain size under 2 $\mu$m. No substrate deformation was observed in this case after the chemical etching, which is more advantageous and more practical in terms of precious machining than the heat treatment case.

• Journal of Bio-Environment Control
• /
• v.19 no.2
• /
• pp.82-87
• /
• 2010

To investigate effects of kind of pot for raising of seedling (single plastic pot, double plastic pot, circular peat pot, square peat pot) and planting method of the pot (3/3, 2/3, and 1/3 by the buried degree of pot height) on watermelon (Citrullus lanatus) growth, this research was conducted under plastic film house. Since planting of seedlings, number, area and photosynthesis rate of leaves, plant height and weight were superior in seedling grown in double plastic pot than those grown in the others. In fruit characteristics harvested at 12 weeks after planting, fruit height, diameter and weight were longer in double plastic pot than in the others, also fruit peel thickness and hilum diameter were thicker and shorter. Initial growth of the plant after planting with seedling grown in double plastic pot was superior in method buried the 2/3 degree of the pot height than the other methods.

• Journal of Conservation Science
• /
• v.25 no.4
• /
• pp.347-361
• /
• 2009

The Pohang Chilpori is the area with abundant petroglyphs in Korea. The form of the shield, female sex organs, and yut board on the outcrops or float rocks which are composed of the rhyolitic rock are engraved on Chilpori and Shinheungri Petroglyphs. The rhyolitic rock is composed of the phenocryst and groundmass with quartz and feldspar. The rock surface shows mostly yellowish brown color and the rock surface is very irregular by serious weathering, and illite and kaolinite, a kind of the clay minerals, are produced. Deterioration aspects are mainly of surface exfoliation, grain peel-off, damages, scribbling. Chilpori Petroglyph (1) plane has been eroded by running water, in (2) plane has been abrased is on the rock surface, in (3) plane shows surface exfoliation and the various part of the rock surface in plane (4) has become the soil. The corrasion and black phenomenon of the Shinheungri Petroglyph (1) plane was formed by running water, and surface exfoliation and scribbling in plane (2) is serious. Deterioration factors are geomorphologic states, plants, rock of weak to weathering, and artificial influence such as a scribbling and a forest fire. For conservation of the these petroglyphs, study for rock surface conservation and the arrangement of around petroglyphs and construction of water wall are necessary.

• Journal of Food Hygiene and Safety
• /
• v.19 no.3
• /
• pp.126-131
• /
• 2004

This study was conducted to investigate of inhibition activity of yuza (Citrus junos) extracts and juice on nitrite scavenging and N-nitrosodimethylamine (NDMA) formation in model system. Yuza juice was separated into organic acid, ascorbate and phenolic portion using sep-pak $C_{18}$ cartridge, respectively. Nitrite scavenging activity and inhibition of NDMA formation from yuza extract has shown higher inhibition with pH of reaction condition lower and amount of added sample more. And peel extract of yuza was higher than those of flesh extract. Nitrite scavenging activity was excellent juice portion rather that 3 portions. Of the 3 portions, it activity was the highest in the organic acid portion, and decreased in the following order; phenolic acid, ascorbate portion. Therefore, organic acid of yuza was suggested to expect effective ihhibitor of NDMA formation.

• Korean Journal of Food Science and Technology
• /
• v.43 no.5
• /
• pp.577-582
• /
• 2011

Greenhouse satsuma mandarins (Citrus unshiu Marc., cv. Gungchun) of an early harvesting cultivar were treated by hot water showering at 65$^{\circ}C$ for 10 s at a commercial scale in a packing house and then stored at 5$^{\circ}C$ for 3 weeks and subsequently at 18$^{\circ}C$ for 1 week (simulated shelf-life) to examine the potential use of hot water treatment (HWT) as an environmentally benign method to maintain mandarin quality characteristics during postharvest storage and sale. The respiration rate just after heat treatment or during storage was at a similar level in both the treated and untreated fruit. HWT also had no detrimental effects on quality attributes including pH, titratable acidity, soluble solids content, weight loss, firmness, and peel color. The development of stem-end rot, mold decay, and black rot was lower in the heat-treated fruit compared to those in the untreated control. A sensory evaluation showed that HWT markedly improved fruit appearance, making the fruit cleaner and glossier. The results suggested that HWT can be applied to satsuma mandarin as an effective pretreatment to maintain postharvest quality during storage and marketing.

• Applied Biological Chemistry
• /
• v.40 no.4
• /
• pp.313-317
• /
• 1997

To assess the physiochemical characteristics of greenhouse Satsuma mandarin (Citrus unshiu Marc. var, miyakawa) produced in Cheju, were analyzed chemical compositions for fruits, external and internal factors influencing the edible quality. Changes in organoleptic value according to brix and acid content were also evaluated. The ratios of sucrose : glucose : fructose in citrus juice were 2 : 2 : 1.5. Citric acid as the main acid in the juice represented about 70% of total organic acid. Most of the amino acids were found to be nonessential amino acids. Deep yellow color of the citrus peel showed a significant relationship(r=0.563) with brix/acid ratio of the citrus juice, indicating the ripeness of the fruit. Since the acid content showed highly negative statistical relationship(r= -0.882) with the pH value of the juice, the pH value appears to be a simple indicator for the sourness of the fruit in the field test. The fruits were divided into 9 groups based on the brix/acid contents for sensory evaluation. The palatability patterns of each group changed depending on the acid content. The optimal ranges of brix/acid content for acceptable taste were 11 and $0.5{\sim}1.0$, respectively.

• Journal of Korea Multimedia Society
• /
• v.11 no.10
• /
• pp.1409-1419
• /
• 2008

Inauthentic resources can be easily spread by P2P (Peer-to-Peer) participants due to the openness and anonymity of P2P networks. A possible way to restrict the distribution of inauthentic resources and prevent malicious peers from joining P2P networks is to exploit peers' reputation which reflect their past behaviors and are also helpful to predict peers' future behaviors. There is a possibility that some peers intentionally plays along with other peers in order to increase/decrease its reputation through false feedback exchanges. Therefore, we propose a new reputation management scheme, called TrustRRep (Trustable Resource sharing service using Reputation) scheme, which improves the trustworthiness and efficiency of P2P networks by identifying peers who give false feedback. The TrustRRep scheme is also capable of providing peers with the trustworthiness of shared resources by discriminating resources distributed by malicious peers. We implement the proposed TrustRRep scheme on the NS-2 simulator for evaluating its performance compared to the recent reputation management work available in literature. A case study on simulations shows that the proposed reputation management scheme yields efficient performance in terms of the minimal download ratio and dissemination of inauthentic resources, the efficient identification of peers who give false feedback, and the provisioning of the trustworthiness of peers' reputation. It also shows that the proposed TrustRRep scheme imposes the restrictions of participating P2P networks on a malicious peers by diminishing its trust value.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.709-716
• /
• 2015

In this study, structural developments of polypropylene / ionomer / clay ternary composites were investigated depending on the dispersion and localization of clay. The changes in physical properties were observed adding organoclays 1~10wt% to 90% polypropylene and 10% ionomer blends. The organoclays were localized inside of the dispersed phase under the composition of 3wt%, however, over that composition, clay particles formed stiff network structure in the dispersed phase and additional clays were localized at the interface between two phases. According to the developments of microstructure, the interaction of ternary composites changed from polypropylene-ionomer to polypropylene-ionomer and ionomer-clay which affected rheological properties. The storage modulus (G') of the composites was similar to the blends when clays were localized inside of dispersed phase but increased when clays were localized at interface. Also, the fractured morphology of the composites showed phase boundary and growing radius of dispersed phase depending on addition of fillers when clays were found inside. However, when fillers found at the interface between blends, the radius of the dispersed phase decreased and compatibilized morphology were observed. The interfacial interaction of the ternary composite was quantified depending on the structural development of dispersed phase and localization of clay particles by the rheological properties. The interaction of composites at solid state which was measured through peel adhesion strength increased by growth of interfacial interaction of each component. Furthermore, the crystallinity of the composites was decreased when the clay particles were localized at the interface.