• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.12 s.103
• /
• pp.1229-1238
• /
• 2005

OFDM(Orthogonal Frequency Division Multiplexing) communications system is very attractive for the high data rate wireless transmission. However, it may be distorted in the nonlinear HPA(High Power Amplifier) since OFDM signal has hish PAPR(Peak-to-Average Power Ratio). In this paper, a new method using control tone is studied for reducing the PAPR and we call it PCT(PAPR Control Tone) method. This proposed PCT method is to assign control tones for PAPR reduction at the predefined sub-carriers. After IFFT(Inverse Fast Fourier Transform) and PAPR calculation, the OFDM data signal of the lowest PAPR is selected to transmit. Unlike the conventional method, it can cut down the computational complexity because it does not require the transmission and demodulation process of side information about the phase rotation. Furthermore, if this method is made up in parallel configuration, it can solve the time delay problem so that it can be processed in real time processing. This proposed method is compared with the conventional selected mapping(SLM) technique. We find out the PAPR reduction performance and BER when the number of control tone is 6 and nonlinear HPA is considered.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5A
• /
• pp.571-575
• /
• 2008

Orthogonal Frequency Division Multiplexing(OFDM) is one of the most promising techniques for 4th generation communication systems. One of the main disadvantages of OFDM is the Peak to Average Power Ratio(PAPR). In this paper, a recoverable peak cancellation(RPC) technique that recovers the cancelled part for the peak-cancelled OFDM signal is introduced. Using the RPC technique, the bit error rate(BER) performance can be greatly improved and the efficiency of the PAPR reduction is nearly that of the clipping method, at a cost of slightly reducing the transmission data rate.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.7
• /
• pp.677-684
• /
• 2003

This paper addresses the subblock phase weighting(SPW) method to reduce the PAPR in OFDM system. This method divides the input block of OFDM signal into many subblocks and lower the peak power by weighting the phase of each subblocks properly. SPW method can be realized by only one IFFT. PAPR reduction performance is novelly examined when the adjacent, interleaved and random subblock partitioning schemes are used in the SPW system. The random subblock partition scheme has the most effective. More subblocks can effectively reduce the PAPR, but there is a problem that the processing time of iteration is increased. We propose a new weighting factor combination of the complementary sequence characteristic with threshold technique. OFDM data can be recovered by the inserted side information of weighting factor in the feed forward type. Also, BER performance of this SPW system is analyzed when error happens in the side information.

• Journal of electromagnetic engineering and science
• /
• v.7 no.4
• /
• pp.169-174
• /
• 2007

This paper presents a method of superimposing the rotation phases over the pilot and data symbols in order to reduce the peak-to-average power ratio(PAPR) in orthogonal frequency division multiplexing(OFDM). The phases of the rotation vector are added to those of the pilot symbols and those of the data symbols by interlaying them between any two pilot symbols. The receiver restores the data symbols by utilizing the channel estimation of the pilot symbols. Therefore, the bandwidth efficiency is improved by not using the subcarriers that are assigned for the reduction of the PAPR. Also, the enormous increase of the bit error rate which would be caused by incorrectly receiving the side information, i.e. the phases of the rotation vector, is prevented. The simulation results of the bit error rate performance for the BPSK are given using the COST-207 channel model.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.42-48
• /
• 2008

Next generation wireless communication systems require RF transceivers that enable multiband/multimode operations. Polar transmitters are known as good candidates for high data rate systems such as EDGE (Enhanced Data Rates for GSM Evolution), WCDMA (Wideband Code Division Multiple Access), and WLAN (Wireless Local Area Network) because they can obtain high efficiency by using efficient switched-mode RF power amplifiers. In this paper, we investigate the performance of a simple peak windowing scheme for the OFDM (Orthogonal frequency Division Multiplexing) polar transmitter, which requires no change of a receiver structure or no additional information transmission. The approach we employed is to apply the peak windowing scheme to the amplitude modulated signals of the polar transmitter to reduce the PAPR (Peak-to-Average Power Ratio). The BER (Bit Error Rate) and EVM (Error Vector Magnitude) performances are measured for various window types and lengths. The simulation results demonstrate that the proposed algorithm mitigates out-of-band distortion introduced by clipping along with PAPR reduction.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1589-1595
• /
• 2007

Recently many communication systems ate adapting the OFDM(Orthogonal Frequency Division Multiplexing) for multimedia data services. However, OFDM has some problems that PAPR is increased when sub-carries are summed up with same phases. This problem causes severe signal distortions while the signal is passing through non-linear system such as power amplifier resulting in performance degradation of transmission system. In this paper, we use IF-Clipping method to solve PAPR problem and the signal distortion caused by clipping is limited by use of SAW (Surface Acoustic Wave) filter and power amplifier(TWTA). And we derive the optimal parameter(PAPR, Backoff) values to meet the spectrum mask of WiBro system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.1
• /
• pp.200-220
• /
• 2016

Orthogonal frequency division multiplexing (OFDM) signals suffer from the problem of large peak-to-average power ratio (PAPR) which complicates the design of the analog front-end of the system. Companding is a well-known PAPR reduction technique that reduces the PAPR by transforming the signal amplitude using a deterministic function. In this paper, a novel piecewise linear companding transform is proposed. The design criteria for the proposed transform is developed by investigating the relationships between the compander and decompander's profile and parameters with the system's performance metrics. Using analysis and simulations, we relate the companding parameters with the bit error rate (BER), out-of-band interference (OBI), amount of companding noise, computational complexity and average power. Based on a set of criteria developed thereof, we formulate the design of the proposed transform. The main aim is to preserve the signal's attributes as much as possible for a predetermined amount of PAPR reduction. Simulations are carried out to evaluate and compare the proposed scheme with the existing companding transforms to demonstrate the enhancement in PAPR, BER and OBI performances.

• Journal of Communications and Networks
• /
• v.11 no.1
• /
• pp.11-19
• /
• 2009

Multicarrier direct sequence code division multiple access (MC DS-CDMA) is an attractive technique for achieving high data rate transmission. This is valid regardless of whether or not the potentially large peak-to-average power ratio (PAPR) is an important factor for its application. On the other hand, code select CDMA (CS-CDMA) is an attractive technique with constant amplitude transmission of multicode signal regardless of subchannels. This is achieved by introducing a code select method. In this paper, we propose a new multiple access scheme based on the combination of MC DS-CDMA and CS-CDMA. The proposed scheme, which we call MC CS-CDMA, includes as special cases the subclasses of MC DS-CDMA and CS-CDMA. This paper investigates the performance of these systems over a multipath frequency selective fading channel using a RAKE receiver with maximal ratio combiner. In addition, the PAPR of the proposed system is compared with that of both MC DS-CDMA and CS-CDMA. Simulation results demonstrate that the proposed system provides better PAPR reduction than MC DS-CDMA, at the expense of the complexity of the receiver and the number of available users. The numerical result demonstrates that the proposed system has better performance than MC DS-CDMA due to the increased processing gain and time diversity gain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1059-1066
• /
• 2009

In this paper, we propose the precoder with superimposed pilots for orthogonal frequency-division multiple access (OFDMA) systems in order to enhance the transmission efficiency of the system and reduce peak-to-average power ratio (PAPR) which is the problem in OFDMA uplink. In wireless communication systems, the way to improve transmission efficiency is 1) to reduce bit error rate (BER) or 2) to increase data rate. In the proposed scheme, we design the precoder and superimposed pilots in the transmitter and use them in the receiver for increasing data rate, caused by the saved transmission bandwidth thanks to the superimposed pilots. In addition, we improve BER performance with the help of the frequency diversity gain caused by precoding. Also using superimposed pilots, we enhance the PAPR performance by increasing the average output power of the signal.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.12 s.103
• /
• pp.1171-1178
• /
• 2005

Multi-code code division multiple access(MC-CDMA) has been proposed for providing the various service rates with different quality of service requirement by assigning multiple codes and increasing the capacity. However, it suffers from the serious problem of high peak to average power ratio(PAPR). So, it requires large input back-off, which causes poor power consumption in high power amplifier(HPA). In this paper, we propose a new method that can reduce PAPR efficiently by constraint codes based on the opposite correlation to the incoming information data in MC-CDMA. PAPR reduction depends on the length and indices of constraint codes in MC-CDMA system. There is a trade-off between PAPR reduction and the length of constraint codes. From the simulation results, we also investigate the BER improvement in AWGN channel with HPA. The simulation results show that BER performance can be similar with linear amplifier in two cases: 1) Using exact constraint codes without input back-off and 2) a few constraint codes with small input back-off.