• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.63-66
• /
• 2004

본 논문에서는 채널간간섭 자기소거를 위한 부대역 부호화기법에 따른 직교 주파수분할다중화의 첨두전력대 평균전력비가 분석된다. 인접부대역에 대척신호를 할당하는 기존 상관부호화의 경우 전송신호열에서 형상성분이 발생되며, 이로 인하여 직교 주파수분할다중화 시스템의 첨두전력 대 평균전력비가 최대 3dB 가량 증가됨을 이론적$\cdot$실험적으로 검증한다. 그리고 이와 같은 형상성분을 제거할 수 있는 새로운 부대역 부호화기법이 제시된다. 여기서는 인접부대역에 할당되는 신호쌍의 위상차가 신호사상기의 출력에 따라 변화된다. 그 결과, 새로운 부대역 부호화기법이 적용된 시스템은 기존의 시스템보다 $2\~3dB$ 적은 첨두전력 대 평균전력비를 가지는 것을 확인할 수 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.795-802
• /
• 2005

Binary CDMA(B-CDMA) is a new modulation scheme that employs a constant envelope modulation scheme By quantizing the envelope of multi-codes CDMA signal into a small number of levels, the B-CDMA can reduce the peak-to-average power ratio, while preserving the advantages of CDMA signaling such as the soft capacity and robustness to interference. In this paper, we analyze the performance of B-CDMA systems in multi-path channel assuming that the spreading factor is not too small. Finally, the analytic results are verified by computer simulation.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.3007-3009
• /
• 2005

본 논문에서는 selective mapping(SLM)과 partial transmit sequence(PTS)기법을 결합하여 othogonal frequency division multiplexing(OFDM) 신호들의 peak-to-average power ratio(PAPR)감소 성능을 향상 시키며 SLM과 PTS기법의 결합으로 인한 증가된 복잡성을 inverse fast Fourier transform(IFFT)의 어떤 중간 단계 이후 위상 시퀀스를 곱함으로써 낮추었다. 이와 같이 새로운 알고리듬을 제안하고 제안한 기법과 기존의 SLM과 PTS 기법의 PAPR 감소 성능을 simulation을 통하여 비교, 분석하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.2
• /
• pp.159-165
• /
• 2010

The Multi-code (Mc) modulation has been developed for high-speed data transmission over the wireless environments, but it suffers two critical problems due to the limited resource of Orthogonal Codes (OC) and high Peak-Average Power Ratio (PAPR). In this paper, we propose a novel modulation technique called AOCG [1] (Advanced Orthogonal Code Group)-OFDM (Orthogonal Frequency Division Multiplexing) to solve the above problems and obtain the variable high bit rates which can be controlled by the four parameters depending on the quality of services (QoS) required by users.

• Journal of the Optical Society of Korea
• /
• v.20 no.4
• /
• pp.451-463
• /
• 2016

The misalignment errors and fluctuations in irradiance due to atmospheric turbulence can severely degrade the performance of free-space optical (FSO) systems. In this paper, we investigate the asymptotic bit error rate (BER) performance and diversity orders of FSO links using parallel transmit-diversity schemes. The BER expressions of FSO links with the switch-and-examine transmit (SET), switch-and-examine transmit with post-selection (SETps), dual-branch transmit laser selection (Dual-TLS), and group transmit laser selection (Group-TLS) schemes are derived, based on an approximate channel model. Then numerical simulations for these four schemes in the region of high average signal-to-noise ratio (SNR) are presented under different channel conditions. The results show that the four transmit-diversity schemes can reduce system complexity and overcome the limitation of peak power, without much BER deterioration.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5A
• /
• pp.521-526
• /
• 2004

OFDM is a very attractive technique for achieving high-bit-rate data transmission and high spectrum efficiency. However, one of disadvantages of OFDM signal is the high PAPR characteristic when multi-carriers are added up coherently. In this Paper, we propose-scrambling scheme using correlator for PAPR reduction and reducing the amount of PAPR calculations. The simulation results show that this scheme has less computational complexity and reasonable PAPR reduction capability compared to PTS technique.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9A
• /
• pp.649-655
• /
• 2009

The peak-to-average power ratio (PAPR) regrowth after the clipping is one main disadvantage of space-frequency block coded orthogonal frequency-division multiplexing (SFBC-OFDM). In this paper, we propose a relay assisted low PAPR technique for SFBC-OFDM transmission. For low PAPR at the source (mobile equipment), the relay processes SFBC encoding, which enables the source to transmit clipped single-input single-output (SISO)-OFDM signals without any increase of PAPR. Simulation results show that the clipped signal of proposed scheme is effectively recovered, and the proposed scheme achieves the diversity of SFBC without the complexity of multiple antennas at the source.

• ETRI Journal
• /
• v.41 no.3
• /
• pp.298-307
• /
• 2019

This paper investigates the use of the inverse-free sparse Bayesian learning (SBL) approach for peak-to-average power ratio (PAPR) reduction in orthogonal frequency-division multiplexing (OFDM)-based multiuser massive multiple-input multiple-output (MIMO) systems. The Bayesian inference method employs a truncated Gaussian mixture prior for the sought-after low-PAPR signal. To learn the prior signal, associated hyperparameters and underlying statistical parameters, we use the variational expectation-maximization (EM) iterative algorithm. The matrix inversion involved in the expectation step (E-step) is averted by invoking a relaxed evidence lower bound (relaxed-ELBO). The resulting inverse-free SBL algorithm has a much lower complexity than the standard SBL algorithm. Numerical experiments confirm the substantial improvement over existing methods in terms of PAPR reduction for different MIMO configurations.

• Nuclear Engineering and Technology
• /
• v.56 no.5
• /
• pp.1895-1901
• /
• 2024

The fission model, G4ParaFissionModel, was enhanced in this study, mainly focusing on refining the energy dependence of the peak-to-valley ratio in the mass distribution and the energy dependence of the average total kinetic energy (TKE). The enhanced model was employed to investigate the characteristics of fission products from ²³⁵U(n, f) reaction. The calculated results, including fission yield, TKE distribution, prompt fission neutron and gamma spectra, were compared with both evaluated and experimental data. The comparison shows that these physical observables related nuclear data, which are of importance for developments of the nuclear power and physics, can be reasonably well reproduced.

• Geomechanics and Engineering
• /
• v.30 no.5
• /
• pp.401-411
• /
• 2022

To obtain the dynamic mechanical properties, fracture modes, energy and brittleness characteristics of Furong Baijiao coal rock, the dynamic impact compression tests under 0, 4, 8 and 12 MPa confining pressure were carried out using the split Hopkinson pressure bar. The results show that failure mode of coal rock in uniaxial state is axial splitting failure, while it is mainly compression-shear failure with tensile failure in triaxial state. With strain rate and confining pressure increasing, compressive strength and peak strain increase, average fragmentation increases and fractal dimension decreases. Based on energy dissipation theory, the dissipated energy density of coal rock increases gradually with growing confining pressure, but it has little correlation with strain rate. Considering progressive destruction process of coal rock, damage variable was defined as the ratio of dissipated energy density to total absorbed energy density. The maximum damage rate was obtained by deriving damage variable to reflect its maximum failure severity, then a brittleness index BD was established based on the maximum damage rate. BD value declined gradually as confining pressure and strain rate increase, indicating the decrease of brittleness and destruction degree. When confining pressure rises to 12 MPa, brittleness index and average fragmentation gradually stabilize, which shows confining pressure growing cannot cause continuous damage. Finally, integrating dynamic deformation and destruction process of coal rock and according to its final failure characteristics under different confining pressures, BD value is used to classify the brittleness into four grades.