• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.6
• /
• pp.17-22
• /
• 2004

A study for investigating the effects of the cutting conditions (radial depth of cut feed per tooth) and the number of tooth on the side wall of prismatically milled workpiece is described. This study is available not only for understanding the geometrical characteristics of the end milled side wall but also for finding the optimal cutting conditions. In this work, the side wall geometry was characterized by the straightness and the location of maximum peak point. Through this study, it was revealed that the geometrical characteristics of the end milled side wall are strongly related to the material removal per tooth and the number of tooth.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.23-28
• /
• 2003

We report a switchable RGB color filters for Lab on a chip. Ink color filter devices are fabricated by PDMS patterning process. The optical transmission in the ultra-violet and visible wavelengths of color filters have been investigated. The ink color filters are characterised by the slope and shape of the spectrum. The transmission of red/yellow filter consists of curves with a sharp cut-off spectrum at 600 and 500 nm. The blue output of the ink filter has 80% peak transmission and weak red-leak, while the green ink filter has 48% peak transmission and red-leak.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.68-74
• /
• 2004

The use of digital filters in the signal processing field is increasing rapidly with development of the modem industrial society, and generally digital filter is classified into FIR (infinite impulse response) fillers and FIR (finite impulse response) filters. The FIR digital filter has the phase linearity and the easiness of creation. In the design of the FIR digital filter, the window function is used to alleviate ripples caused by Gibbs Phenomenon around the cut-off frequency of the passband. In this paper, we designed a new window function and compared with existing Manning, Hamming and Blackman window functions. And we used peak side-lobe and transient characteristics as standard of judgement.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.87-96
• /
• 1993

In this study, the peak stress of a fuillet in elastic structure was optimized to have minimum value by using quadratic isoparametric element. The method of auomatic gridding was also developed along with shape algorithm and design element technique was adopted in selecting design variables. The computer program developed was combined with the Hooke-Jeeves direct algorithm of optimization techniques in order to minimize the peak stress of the fillet. The imployment of design element technique significantly cut down computer time by the reduction in design variables, and the opitmum fillet shape with uniform minimum stress was obtained by varying design variables along x and y directions in improving the shape compared to other results. By using automatic gridding, in which Bezier surfaces and Coons surfaces of cubic interpolation were employed, the irregular boundary was removed resulting in smoother anbd more accurate fillet shape possessing uniform minimum stress.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.221-223
• /
• 1991

In order to evaluate degradation of the aged power cables, thin slices(200m) cut from the aged cables were prepared for thermally stimulated current measurements. Throughout the temperature range, 140 to $280^{\circ}C$ the TSC is greater for the aged material, and sharp peak is observed at $158^{\circ}C$ and $210^{\circ}C$.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2528-2530
• /
• 2000

In general, Diode makes a major role in electronic circuit. For example, switching of rectifier, cross current of switching rectifier, energy transfer of electronic element and reverse charge of capacitor, voltage insulation, energy feedback from load to power supply, and such as recovery of storaged energy. Generally, We regard power diode as ideal element, but it has a certain boundary actually, specially, We use diode for detecting circuit peak hold voltage signal. It has cut in voltage. It occurs error of measurement value namely. This error, below in region diode voltage drop (0.7v) measurement value is wholesome signal, Specially, We can not get precision data. Therefore, precision level is low between theoretical and measurement data because of error in actual circuit. Conclusionally, In this paper, We define the error concerning to the power diode characteristics which is used detecting of the minute signal, and recommend the method that minimize measurement error.

• KIISE Transactions on Computing Practices
• /
• v.23 no.2
• /
• pp.110-115
• /
• 2017

We propose a new indoor positioning algorithm named Cut-off algorithm. This algorithm cuts off candidates of beacons and reference points in advance, before looking for K neighbor reference points which are guessed to be closest to the user's actual location. The algorithm consists of two phases: off-line phase, and on-line phase. In the off-line phase, RSSI and UUID data from beacons are gathered at reference points placed in the indoor environment, and construct a fingerprint map of the data. In the on-line phase, the map is reduced to a smaller one according to the RSSI data of beacons received from the user's device. The nearest K reference points are selected using the reduced map, which are used for estimating user's location. In both phases, relative ranks of the peak signals received from each beacon are used, which smoothen the fluctuations of the signals. The algorithm is shown to be more efficient in terms of accuracy and estimating time.

• Journal of the Korean Magnetics Society
• /
• v.27 no.2
• /
• pp.49-53
• /
• 2017

Metamaterials composed of split cut wire (SCW) on grounded polyimide film substrate have been investigated for the aim of electromagnetic wave absorbers operated in THz frequency band. Reflection loss and current density distributions are numerically simulated with variations of the SCW geometries using the commercial software. The minimum reflection loss lower than -20 dB has been identified at 5.5~6.5 THz. The simulated resonance frequency and reflection loss can be explained on the basis of the circuit theory of an inductance-capacitance (L-C) resonator. Dual-band absorption can be obtained by arrangement of two SCWs of different length on the top layer of the grounded substrate, which is due to multiple magnetic resonances by scaling of SCWs. With increasing the side spacing between SCWs, a more enhanced absorption peak is observed at the first resonance frequency that is shifted to a lower frequency.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.1
• /
• pp.1-13
• /
• 2022

A weighted linear combination of seismic fragility models previously developed for cut-and-cover railway tunnels was presented and the appropriateness of the combined model was evaluated. The seismic fragility function is expressed in the form of a cumulative probability function of the lognormal distribution based on the peak ground acceleration. The model uncertainty can be reduced by combining models independently developed. Equal weight is applied to four models. The new seismic fragility function was developed for each damage level by determining the median and standard deviation, which are model metrics. Comparing fragility curves developed for other bored tunnels, cut-and-cover tunnels for high-speed railway system have a similar level of fragility. We postulated that this is due to the high seismic design standard for high-speed railway tunnel.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.1
• /
• pp.1-7
• /
• 1985

The leaf anatomy, seasonal growth and regrowth of Miscanthus sinensis were studied at Wonju, 1984. The results are summarized as follows: 1. The leaf of M. sinensis showed typical Kranz anatomy. 2. Seasonal change of standing crop was rapidly increased from May to August and reached its peak in early October. The highest rate of net productivity was $510gdw/m^2$ in late July and the lowest was $80gdw/m^2$ in September. 3. The LAI was continuously broadened and reached its peak, 6.3 in July then decreased. The number of leaves per plant rapidly increased from April to July, and gradually decreased thereafter. 4. High cut of M. sinensis in late April has brought better regrowth than cut and that of in late May has no more regrowth.