• Tunnel and Underground Space
• /
• v.11 no.3
• /
• pp.217-224
• /
• 2001

Rock masses are usually discontinuous in nature due to various geological processes and contain rock joints and bridges. Crack propagation and coalescence processes in rock bridge mainly cause rock failures in slopes, foundations, and tunnels. In this study, we focused on the crack initiation, propagation and coalescence process of rock materials containing two pre-existing open cracks arranged in different geometries. Specimens of 120${\times}$60${\times}$25 mm in size, which were made of Yeoman Marble, were prepared. In the specimens, two artificial cracks were cut with pre-existing crack angle ${\alpha}$, bridge angle ${\beta}$, pre-existing crack length 2c and bridge length 2b. Wing crack initiation stress, wing crack propagation angle, and crack coalescence stress were measured and crack initiation, propagation and coalescence processes were observed during uniaxial compression. Crack coalescence types were classified and analytical study using Ashby and Hallam model (1986) was performed to be compared with the experimental results.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.2
• /
• pp.57-62
• /
• 2008

Electrochemical properties of Ti-30Ta-$(3{\sim}15)$Nb alloys coated by HA/Ti compound layer have been studied by various electrochemical method. Ti-30Ta binary alloys contained 3, 7, 10, and 15 wt% Nb contents were manufactured by the vacuum furnace system. The specimens were homogenized for 24 hrs at $1000^{\circ}C$. The samples were cut and polished for corrosion test and coating. It was coated with HA/Ti compound layer by magnetron sputter. The HA/Ti non-coated and coated morphology of Ti alloy were analyzed by x-ray diffractometer(XRD) and filed emission scanning electron microscope(FE-SEM). The corrosion behaviors were investigated using potentiodynamic method in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The homoginazed Ti-30Ta-$(3{\sim}15wt%$)Nb alloys showed the ${\alpha}+{\beta}$ phase, and ${\beta}$ phase peak was predominantly appeared with increasing Nb content. The microstructure of Ti alloy was transformed from needle-like structure to equiaxed structure as Nb content increased. HA/Ti composite surface showed uniform coating layer with 750 nm thickness. The corrosion resistance of HA/Ti composite coated Ti-alloys were higher than those of the non-coated samples in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. Especially, corrosion resistance of Ti-Ta-Nb system increased as Nb content increased.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.4
• /
• pp.373-379
• /
• 2016

The thermal control device for the periodic working component combined solid-liquid phase change material (PCM) with heat pipes is designed and numerically studied. Due to high latent heat and retaining constant temperature during melting process the component peak temperature, not withstanding small radiator size, is reduced. The warm-up heater power consumption to keep the minimum allowed temperature is also cut down since the accumulated thermal energy is released through the solidification. The thermal buffer mass (TBM) made of Al can give the similar effect but the mass and power consumption of warm-up heater should increase compared to PCM. The amount of PCM can be optimized depending on the component heat dissipation and on/off duty time.

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.1 s.22
• /
• pp.17-23
• /
• 2004

Aeroacoustic characteristics of sirocco fan used in Over-The-Range (OTR) has been analyzed in this paper. A microwave hood combination over the gas range is short for the OTR. The flow phenomena of the double-sided sirocco fan was analyzed numerically and experimentally by using commercial code and three dimensional PIV for flow visualization. Also, microphone array is used in order to understand acoustic characteristics of OTR. Two dimensional unsteady flow and acoustic simulation is tried to qualitatively estimate the effects of tonal noise and broadband noise on the overall sound pressure level. It is found that tonal sound is generated from the strong interaction between the impeller and cutoff while broadband sound is generated from the strong secondary flows along the scroll surface. To reduce the noise level, the V-shape cut-off was applied to improve the sound quality by reducing tonal noise. So the peak noise at BPF (Blade Passing Frequency) was almost reduced. The shape of flow-guide to suppress the secondary flow over the scroll surface was carefully checked. It is found that this affects flow pattern at the fan exit and reduces the broad band noise. Through this numerical and experimental study, the sound pressure level was lowered by 4dBA compared to that of the previous fan at the operating point.

• Korean journal of food and cookery science
• /
• v.33 no.3
• /
• pp.292-299
• /
• 2017

Purpose: The present study explored cookie making performance using Jeju magma seawater to elucidate the effects of minerals in water on quality of baked goods. Methods: Seven water samples were analyzed for their mineral content, pH and water hardness. Starch pasting properties of flour in water samples was analyzed using RVA, and cookie making performance using water samples was evaluated with the AACCI wire-cut cookie baking method. Quality of cookies was measured by weight loss during baking, cookie geometry, color, and firmness. Results: Hardness of water samples ranged from 0-4200, and mineral content was in the order of magma seawater > 100% ED mineral water > 50% ED mineral water > 10% ED mineral water > tap water > Samdasoo > distilled water. RVA results showed that water hardness exhibited significant relationships with pasting temperature (p<0.05, R=0.863), peak viscosity (p<0.001, R=0.944), final viscosity (p<0.05, R=0.861), and setback (p<0.05, R=0.782). Cookie baking results showed that cookie diameter increased in the order of magma seawater < 100% ED mineral water < 50% ED mineral water < 10% ED mineral water $\approx$ tap water < Samdasoo < distilled water. Conclusion: As mineral content in water increased, flour pasting temperature and viscosity increased, whereas cookie diameter decreased with color fading. However, cookies formulated with 50% ED mineral water showed similar cookie geometry and texture to those with tap water. Therefore, controlling the mineral content of water can be successfully applied to produce mineral-enriched cookies.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.4
• /
• pp.28-38
• /
• 2004

Korean goral (Nemorhaedus caudatus raddeanus) is one of the endangered species in Korea, and the rugged terrain of the Soraksan National Park (373㎢) is a critical habitat for the species. But the goral population is threatened by habitat fragmentation caused by roads and hiking trails. The objective of this study was to develop a potential habitat suitability model for Korean goral in the park, and the model was based on the concepts of fuzzy set theory and multi-criteria evaluation. The process of the suitability modeling could be divided into three steps. First, data for the modeling was collected by using field work and a literature survey. Collected data included 204 points of GPS data obtained through a goral trace survey and through the number of daily visitors to each hiking trail during the peak season of the park. Second, fuzzy set theory was employed for building a GIS data base related to environmental factors affecting the suitability of the goral habitat. Finally, a multiple-criteria evaluation was performed as the final step towards a goral habitat suitability model. The results of the study were as follows. First, characteristics of suitable habitats were the proximity to rock cliffs, scattered pine (Pinus densiflora) patches, ridges, the elevation of 700∼800m, and the aspect of south and southeast. Second, the habitat suitability model had a high classification accuracy of 93.9％ for the analysis site, and 95.7％ for the validation site at a cut off value of 0.5. Finally, 11.7％ of habitatwith more than 0.5 of habitat suitability index was affected by roads and hiking trails in the park.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4A
• /
• pp.288-295
• /
• 2005

OFDM communications system is very attractive for the high data rate wireless transmission. However, it may be distorted in the nonlinear HPA since OFDM signal has high PAPR. So, a new SLM method using dummy sequence is studied for reducing the PAPR, and we call it DSI-SLM method. Unlike the conventional SLM method using the phase rotation, dummy sequences for PAPR reduction are assigned at the predefined sub-carriers. After IFFT, the OFDM data signal of the lowest PAPR is selected to transmit. So, it can cut down the computational complexity because it does not require the transmission and demodulation process of side information about the phase rotation. This proposed method can solve the time delay problem so that PAPR reduction can be made in real time processing.

• Korean Journal of Metals and Materials
• /
• v.46 no.10
• /
• pp.691-699
• /
• 2008

Electrochemical characteristics of Ti-30Ta-xZr alloys coated with HA/TiN by using magnetron sputtering method were studied. The Ti-30Ta containing Zr(3, 7, 10 and 15wt%) were 10 times melted to improve chemical homogeneity by using a vacuum furnace and then homogenized for 24hrs at $1000^{\circ}C$. The specimens were cut and polished for corrosion test and coating, and then coated with HA/TiN, respectively, by using DC and RF-magnetron sputtering method. The analyses of coated surface and coated layer were carried out by using optical microscope(OM), field emission scanning electron microscope(FE-SEM) and X-ray diffractometer(XRD). The electrochemical characteristics were examined using potentiodynamic (-1,500 mV~ + 2,000 mV) and A.C. impedance spectroscopy(100 kHz ~ 10 mHz) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The microstructure of homogenized Ti-30Ta-xZr alloys showed needle-like structure. In case of homogenized Ti-30Ta-xZr alloys, a-peak was increased with increasing Zr content. The thickness of TiN and HA coated layer showed 400 nm and 100 nm, respectively. The corrosion resistance of HA/TiN-coated Ti-30Ta-xZr alloys were higher than that of the non-coated Ti-30TaxZr alloys, whic hindicate better protective effect. The polarization resistance($R_p$) value of HA/TiN coated Ti-30Ta-xZr alloys showed $8.40{\times}10^5{\Omega}cm^2$ which was higher than that of non-coated Ti-30Ta-xZr alloys.

• Korean Journal of Exercise Nutrition
• /
• v.25 no.3
• /
• pp.16-22
• /
• 2021

[Purpose] Exercise-associated hyponatremia (EAH) is a well-known condition among endurance athletes at low altitudes. The incidence of EAH during ultramarathons at high altitudes warrants further investigation. This prospective observational study was conducted on the participants of the Leadville Trail 100 run, a 161-km race held at a high altitude (2,800 m-3,840 m). [Methods] Venous blood samples were collected before and immediately after the race. The participants completed an electronic survey after the race. Our main outcome measure was the post-race serum sodium ([Na⁺]) level. [Results] Of the 672 athletes who started the race, 351 (52%) successfully completed the event within the 30-hour cut-off. Post-race blood samples were collected from 84 runners (66 finishers). Both pre- and post-race blood samples were collected from 37 participants. Twenty percent of the post-race participants had EAH. Only one post-race participant had a [Na⁺] level of <130 mmol/L. All participants with EAH were asymptomatic. One participant had an abnormal pre-race [Na⁺] level (134 mmol/L). Female participants had a significantly higher rate of EAH than male participants (40% vs. 16%; p=0.039). Age, body mass index, weight changes, race completion status, nonsteroidal anti-inflammatory drug use, and urine specific gravity were not associated with the development of EAH. Lower postrace [Na⁺] levels were associated with higher serum creatine kinase values (R²=0.1, p<0.005). [Conclusion] High altitude (3,840 m peak) does not appear to enhance the incidence of EAH after an ultramarathon footrace. This suggests that ambient temperature (low temperatures reduce risk), sex (female predilection), endurance running, and overhydration are more prominent risk factors for EAH than high altitude.

• Korean journal of applied entomology
• /
• v.48 no.4
• /
• pp.527-533
• /
• 2009

This study was performed to investigate the escape of pine wood nematode (PWN), Bursaphelenchus xylophilus, from two vector species (Monochamus alternatus and M. saltuarius) through oviposition and feeding behavior. First, we checked number of PWNs escaped from M. alternatus emerged from three different cases of pine logs. In case A, healthy pine trees were cut into logs and left in pine forest infected with PWN. In case B, healthy pine trees were cut into logs, left in large screen cage, and let them oviposited by M. alternatus emerged from pine trees infested with PWN. In case C, pine trees which were harboring M. alternatus were cut into logs, and PWN was inoculated artificially. The M. alternatus adults emerged from the above three cases of pine logs were checked in the next year to know how many PWN they were harboring in their bodies. The percentages of M. alternatus harboring PWN (18.3 and 15.6%, respectively) and number of nematodes per vector ($5,713.1{\pm}9,248.3$ and $2,034.1{\pm}4,746.8$ PWNs, respectively) in case A and B logs are similar to each other. However, the percentage and the number in case C (38.3% and $20,083.1{\pm}32,188.3$ PWNs) were higher than those of case A and B. Among 52 M. alternatus adults harboring PWN from all the three cases, 20 adults (38.5%) were harboring more than 5,000 PWNs per beetle. And these 20 adults were harboring 97.9% of the total PWNs in 52 adults. Second, we checked the daily escape of PWNs from M. alternatus and M. saltuarius collected at pine forest infested with PWN. The PWN escaped from their vector body for $34.9{\pm}12.4$ days for M. alternatus, and for $23.9{\pm}16.2$ days for M. saltuarius, reaching at peak escape during the 2nd week of emergence of the two vector species. A 44.5 and 47.2% to the total PWNs escaped from vector body within 2 weeks of vector emergence for M. alternatus and M. saltuarius, respectively. The number of PWNs escaped from each vector was $3,570.6{\pm}5,189.2$ and $1,556.2{\pm}1,710.3$ for M. alternatus and M. saltuarius, respectively.