• 한국해양공학회지
• /
• 제29권2호
• /
• pp.191-198
• /
• 2015

In this study, we proposed a new type of dual-buoy wave energy converter (WEC) exploiting multi-resonance and analyzed the experimental results from a model test in a 2-D wave flume. A dual-buoy WEC using multi-resonance has two advantages: high efficiency at the resonant frequencies and the potential to extend the frequency range available to extract wave power from the WEC. The suggested WEC was composed of an outer buoy and an inner buoy sliding vertically inside the outer buoy. As the power take-off device, a linear electric generator (LEG) consisting of permanent magnets and coils fixed at each buoy was adopted. Electricity was produced by the relative heave motion between the two buoys. To search for the optimal shape of a dual-buoy WEC, we conducted experiments on the heave motion of a two-body system in regular waves without an LEG installed. Model tests with six combinations of experimental models were conducted in order to find the motion characteristics of a dual-buoy WEC. It was found that model 2, which included a ring-shaped appendage to move the resonant frequency of the outer buoy toward a high value, showed a higher relative heave response amplitude operator (RAO) curve than model 1. In addition, the double-peak shape of the heave RAO curve shown for model 2 indicated the extension of the frequency range for extracting wave power in irregular waves.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.720-725
• /
• 1991

In this thesis, the lead-lag compensator is designed to improve output characteristics of flyback zero voltage switching quasi-resonant converters. The switch and the diode are assumed ideally. And the SMPS is modelled by state equations with four operation modes. And the model for controller design is also achived by using a state space averaging method, which is continuous time average of state variables every period. The lag, the lead and the lead-lag compensator is designed the SMPS respectively. The time domain analysis and the frequency domain analysis are done for each compensated circuit. It is possible increasing the phase margin and improving the transient response by the compensators. The phase lag compensator has small overshoot comparatively. But the bandwidth is narrower than the others, so it has longest settling time. For the phase lead compensator, the response come to steady-state within short period. But the overshoot is the largest due to its large peak gain. Finally, the phase lead-lag compensator has medium characteristics in the overshoot and the settling time.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권6호
• /
• pp.246-252
• /
• 2002

This paper describes the acoustic emission measurement method to diagnose GIS for particles. We measured and analyzed the signals of acoustic waves using acoustic two types sensors with 125KHz and 50KHz resonant frequency respectively when the particles were dropped on the surfaces of circular plates and inside of GlS tanks. We found that the difference between peak outputs of two sensors depended on the types and materials of particles and the conditions of dropping position. These results showed that the outputs of 125KHz sensor were higher than those of 50KHz sensor in circular plate and 362㎸ GIS tank made of steel and vice versa in circular plate and 800㎸ GIS tank made of aluminum. The ratios outputs of 125KHz sensor to those of 50KHz sensor were 1.4 - 2.37 in 800㎸ GIS tank and were 0.5 - 1.0 in 362㎸ GIS tank. Therefore we knew that adaption of two types acoustic sensors which had different resonant frequencies as a very useful method in diagnosis of GIS.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.43-45
• /
• 2004

In this paper, new design concept of MEMS gyroscope using multi mass system is proposed. The gyroscope having wide bandwidth was designed utilizing the multi mass system in order to reduce the degradation of the performance by resonance variation. The multi mass system has more than two masses and separates the resonant peak of each mass. Using MATLAB, the variation of bandwidth and driving displacement according to mass ratio of the multi mass system was analyzed. This result was compared with that of current single mass system gyroscope. In the 7 kHz resonant frequency design, the multi mass system has 395.3Hz bandwidth, which is six times larger than single mass system bandwidth, 58.5 Hz.

• 한국해양환경ㆍ에너지학회지
• /
• 제20권2호
• /
• pp.91-99
• /
• 2017

본 연구에서는 몰수형 진자판을 이용한 파력발전장치의 성능 향상을 위한 파라메트릭 해석을 수행하였다. 선형포텐셜 이론에 기반을 둔 고유함수전개법을 사용하여 파기진 모멘트와 동유체 모멘트를 구하고, 파랑중 진자판의 회전운동 변위와 시간평균 추출파워를 구하였다. 이때 추출파워의 최대값을 주는 최적의 PTO감쇠계수를 제시하였다. 회전 운동하는 진자판으로부터 얻는 추출파워의 최대값은 시스템의 공진주파수에서 일어나며 진자판의 높이와 두께가 증가할수록 최대값은 증가하고 공진폭이 확장된다. 진자판 끝단에 설치된 계류로프는 부하상태에서 복원모멘트를 높이고 설치해역의 파랑과 공진이 유발하는데 활용된다. 천수역에 적합한 몰수형 진자판을 이용한 파력발전장치는 에너지 추출과 동시에 파를 차단하는 방파제의 기능을 동시에 지니고 있다.

• 한국세라믹학회지
• /
• 제34권5호
• /
• pp.505-511
• /
• 1997

The effects of sintering atmospheres(air, O2, N2) on the sintering and microwave dielectric properties of (1-x)CaTiO3-xLaAlO3 system was investigated. The sintered density of (1-x)CaTiO3-xLaAlO3 under air atmosphere increased linearly with increasing x, but it decreased in the range of x>0.5 under O2 atmosphere and x>0.6 under N2 atmosphere in spite of the increament of the smaller La(1.06$\AA$) and Al(0.5 $\AA$) ion than Ca(0.99$\AA$) and Ti(0.6$\AA$). In case of the air sintering atmosphere of (1-x)CaTiO3-xLaAlO3 the two phases of orthorhombic and rhombohedral crystal system were coexisting, and the XRD peak of rhombohedral crystalsystem was to be higher with increasing x. However, the sintering atmosphere of O2 and N2 made the monophasic crystal system of orthorhombic keep up by x=0.5 and x=0.6, respectively, and it transformed to pseudo-cubic crystal system in x>0.5 and x>0.6. The XRD peak intensity of (1-x)CaTiO3-xLaAlO3 was to be gradually higher with increasing x under the air atmosphere of sintering. Whereas, its XRD peak intensity increased till x=0.6 but decreased with increasing x in the range of x>0.6 under O2 and N2 atmosphere. The relative dielectric constant of (1-x)CaTiO3-xLaAlO3 sintered under air atmosphere decreased linearly and the Q.f0 value increased according as x increased. On the other hand, the relative dielectric constant of (1-x)CaTiO3-xLaAlO3 under O2 and N2 atmosphere decreased in the range of x$\leq$0.5 with increasing x, but increased rapidly in the range of x$\geq$0.6. And the Q.f0 value increased till x=0.6 but decreased in the range of x>0.6 with increasing x. The temperature coefficient of resonant frequency had no relation to sintering atmosphere.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.734-739
• /
• 2003

Many types of smart materials and control laws are available to actively adjust the structure from various external disturbances. Usually, a certain type of control laws to activate a specific smart material is well established, but the effectiveness of the control scheme is limited by the choice of the smart materials and the responses of the structure. ER fluid is adequate to provide relatively large control force, on the other hand, the PZT patches are suitable to provide small but arbitrary control forces at any point along the structure. It was found that active vibration control mechanism using ER fluid failed to suppress the excitation off the resonant frequency with changed structural characteristics along the frequency response function of the closed loop of the control system. To compensate this additional peak of the closed loop system, PPF control using PZT as an actuator is added to construct a hybrid controller.

• 전력전자학회논문지
• /
• 제2권1호
• /
• pp.33-38
• /
• 1997

전기자동차용 배터리 충전회로에는 일반적으로 다양한 전력용 반도체 스위칭 소자들이 사용되고 있다. 따라서 사용소자의 비선형성에 기인하는 고조파 발생과 큰 피크전류, 낮은 역률 등으로 부근에 있는 전력시스템에 과도기전류나 파형 왜곡 현상을 발생한다. 그리하여 최근에는 기존의 정류회로에서 무시되었던 역율제어, 선 전류의 피크치 억제, 고조파 발생문제 등이 보다 중요하게 되었다. 따라서 본 연구에서는 기존의 문제점들을 해결하기 위해 전압 상승특성을 개선하고 역율이 0.97이상인 고역율 배터리 충전기용 콘버어터 회로를 제안하고자 한다. 제안된 시스템은 정류된 직류전압을 고주파 인버어터에서 교류 공진파로 변환하고, 고주파 트랜스를 통과한 전압을 다시 정류하여 직류전압으로 변환한다. 특히, 이러한 콘버어터의 사용효과는 역율제어에 의해서 크게 개선될 수 있는데, 납축전지를 이용한 실험을 통해 그 타당성을 입증하고자 한다.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.1991-2004
• /
• 2016

An LC filter is required to reduce the output current ripple in the auxiliary resonant snubber inverter (ARSI) for high-performance applications. However, if the traditional control method is used in the ARSI with LC filter, then unnecessary current flows in the auxiliary circuit. In addressing this problem, a novel load-adaptive control that fully uses the filter inductor current ripple to realize the soft-switching of the main switches is proposed. Compared with the traditional control implemented in the ARSI with LC filter, the proposed control can reduce the required auxiliary current, contributing to higher efficiency and DC-link voltage utilization. In this study, the detailed circuit operation in the light load mode (LLM) and the heavy load mode (HLM) considering the inductor current ripple is described. The characteristics of the improved ARSI are expressed mathematically. A prototype with 200 kHz switching frequency, 80 V DC voltage, and 8 A maximum output current was developed to verify the effectiveness of the improved ARSI. The proposed ARSI was found to successfully operate in the LLM and HLM, achieving zero-voltage switching (ZVS) of the main switches and zero-current switching (ZCS) of the auxiliary switches from zero load to full load. The DC-link voltage utilization of the proposed control is 0.758, which is 0.022 higher than that of the traditional control. The peak efficiency is 91.75% at 8 A output current for the proposed control, higher than 89.73% for the traditional control. Meanwhile, the carrier harmonics is reduced from -44 dB to -66 dB through the addition of the LC filter.

• 대한기계학회논문집A
• /
• 제25권1호
• /
• pp.16-24
• /
• 2001

This paper presents an electromagnetic microactuator using the copper coil electroplated on the p+silicon diaphragm. The microactuator generates a vertical motion of the diaphragm using the radial direction, we propose a new actuator structure with twin magnets. The microactuator field in the radial direction, we propose a new actuator structure with twin magnets. The microactator shows a values of resonant frequency and quality factor in the ranges of 10.51${\pm}$0.22kHz and 46.6${\pm}$3.3, respectively. The twin magnet microactuator generates the maximum peak-to-peak amplitude of 4.4$\mu\textrm{m}$ for the AC rms current of 26.8mA, showing 2.4 times larger amplitude than the single magnet microactuator.