• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.89-96
• /
• 2015

This paper presents a high efficiency, PSM/DCM/CCM triple mode boost DC-DC converter for mobile application. This device operates at Pulse-Skipping Mode(PSM) when it enters light load, and otherwise operate the operating frequency of 1.4MHz with Pulse-Width Modulation(PWM) mode. Especially in order to improve the efficiency during the Discontinuous-Conduction Mode(DCM) operation period, the reverse current prevention circuit and oscillations caused by the inductor and the parasitic capacitor to prevent the Ringing killer circuit is added. The input voltage of the boost converter ranges from 2.5V ~ 4.2V and it generates the output of 4.8V. The measurement results show that the boost converter provides a peak efficiency of 92% on CCM and 87% on DCM. And an efficiency-improving PWM operation raises the efficiency drop because of transition from PWM to PFM. The converter has been fabricated with a 0.18um Dongbu BCDMOS technology.

• International Journal of Highway Engineering
• /
• v.7 no.4 s.26
• /
• pp.21-30
• /
• 2005

Traffic volume data have been used for the plan, the design, and the operation of highway. Since 1955, traffic survey has been nation- widely carried out at national highway and the regular survey in national highway has been conducted at the intersections of highways. However, it is critical issue to select the priority of the regular survey because it is almost impossible to conduct regular survey at all intersections of national highways. In this study, MCDM(Multiple Criteria Decision Making) using AHP(Analytic Hierarchy Process) was applied to decide the priority of the regular survey. The following standard variables for determining the priority was selected the highway plan variables[AADT, VKT, Peak Hourly Volume, Location of highway from Urban], the highway design variables[Volume(pcu), Directional Traffic Volume, Heavy Vehicle Rate], and the highway operation variables[Speed, Density, V/C]. The standard variables were quantified and normalized. Using the Eigen vector method, the weighted values of each hierarchy based on the pair-wise comparison values from the questionnaire survey were calculated. The selection of the priority of regular survey was dependent on the size of the product of the weighted values for each hierarchy and the normalized values for the standard variables. Finally, the priority of regular survey of the intersections of national highways was determined according to the order in the size of the product of two values.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.2
• /
• pp.196-208
• /
• 1997

This study was performed to estimate quartz contents in the both bulk and airborne dust samples and to determine particle size distribution of airborne dust from the selected foundry operations. Total dust samples were collected by a 37mm cassette and respirable by a 10 mm nylon cyclone. Particle size distributions were determined by a Marple's 8-stage cascade impactor at the melting, molding, shakeout and finishing operations. The presence of elements in the dust samples were confirmed by the scanning electron microscopy equipped with the energy dispersive x-ray spectrometry. The quartz contents were estimated using the intensity of the absorption peak of quartz at 799 cm-l by the Fourie Transformed Infrared Spectroscopy (FTIR). The results were as follows: 1. The analysis of data from cascade Impactor showed bimodal distributions of particle size at the melting, molding and shakeout operations. Mass median aerodynamic diameters for the distributions determined by histogram were $0.48-1.65{\mu}m$ for small and $13.43-19.58{\mu}m$ for large modes. In the dust samples collected at the finishing operations, however, only a large mode of $18.89{\mu}m$ was found. 2. The percentages of total to respirable dust concentration calculated from the impactor data ranged from 42 % to 66 %. The average concentrations of respirable dust by cyclone were $0.85-1.28mg/m^3$ collected from the workers, and were $0.23-0.56mg/m^3$ from the areas surveyed. Dust concentrations of personal samples were statistically significantly higher than those of area samples. The highest dust concentration was obtained from the personal samples of the finishing operation. 3. The mean percentages of silicon and oxygen estimated by SEM-EDXA in the bulk samples ranged from 35.83 % to 36.02 % and from 39.93 %-41.64 %, respectively. 4. The average quartz contents estimated by FTIR in the respirable dust from personal samples ranged from 4.32 % to 5.36 % and 4.54 % to 4.70 % in the bulk samples. No statistical difference of quartz content was found between foundry operations. In this study, quartz content was quantified by FTIR. Although no statistically significant difference in quartz content between airborne and bulk, samples and between different foundry operations was found, it is recommended that quartz content in the individual sample of respirable dust be analyzed and the results be used either to select an applicable quartz limits or to calculate the exposure limit. Further studies, however, are needed to compare the results by FTIR and XRD since it is reported that the quartz content determined by FTIR is different from that by XRD.

• Nuclear Engineering and Technology
• /
• v.28 no.2
• /
• pp.137-149
• /
• 1996

The present study is to analyze an integral test, BETHSY test 6.9c, which represent loss of RURS accident under mid-loop operation. Both the pressurizer manway and the steam generator outlet plenum manway are opened as vent paths in order to prevent the system from pressurization by removing the steam generated in the core. The main purposes are to gain insights into the physical phenomena and identify sensitive parameters. Assessment of capability of CATHARE2 prediction can be established the effective recovery procedures using the code in an actual plant. Most of important physical phenomena in the experiment could be predicted by the CATHARE2 code. The peak pressure in the upper plenum is predicted higher than experimental value by 7 kPa since the differential pressure between the pressurizer and the surge line is overestimated. The timing of core uncovery is delayed by 500 seconds mainly due to discrepancy in the core void distribution. It is demonstrated that openings of the pressurizer manwey and the steam generator manway can prevent the core uncovery using only gravity feed injection. Although some disagreements are found in the detailed phenomena, the code prediction is considered reasonable for the overall system behaviors.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.4_1
• /
• pp.107-119
• /
• 1992

A heavy storm hit the central part of the Korean Peninsula especially on the Chungju Dam Basin from the 9th to 12th of September 1990. The Chungju multipurpose dam is the largest water project in Korea completed in 1986. The storm recorded a peak inflow of about $21,000m^3/sec$ at the dam site which is equivalent to 500 to 1000 years recurring frequency according to the designed concept. Extensive hydrological analyses including field investigation were performed to identify the storm. The result of the field investigation showed that 6 gages among the 22 telemetering rain-gages located in the basin were proved to be out-of-normal operation during the storm. The corrected basin average rainfall was estimated to be 458.6 mm ranging from 206 to 665 mm. The correction of the rainfall depth included the adjustment of the rainfall depths of the 6 gages using the Kriging interpolation technique, and adjustment according to the heights of the gage mouths. For the maintenance and operation of the Chungju Dam, new design floods were suggested from the trend analysis which showed that the design flood have to be increased because of the increasing tendency of the annual flood peaks.

• The Journal of the Korean life insurance medical association
• /
• v.29 no.2
• /
• pp.29-32
• /
• 2010

Moyamoya disease (MMD) is a progressive occlusive disease of the cerebral vasculature with particular involvement of the circle of Willis and the arteries that feed it. MMD is one of cerebrovacular accident,which is treated with sugical maeuver in pediatic neurosurgery. Moyamoya (ie, Japanese for "puff of smoke") characterizes the appearance on angiography of abnormal vascular collateral networks that develop adjacent to the stenotic vessels. The steno-occlusive areas are usually bilateral, but unilateral involvement does not exclude the diagnosis. The exact etiology of moyamoya disease is unknown. Some genetic predisposition is apparent because it is familial 10% of the time. The disease may be hereditary and multifactorial. It may occur by itself in a previously healthy individual. However, many disease states have been reported in association with moyamoya disease, including the following: 1) Immunological - Graves disease/thyrotoxicosis 2) Infections - Leptospirosis and tuberculosis 3) Hematologic disorders - Aplastic anemia, Fanconi anemia, sickle cell anemia, and lupus 4) Congenital syndromes - Apert syndrome, Down syndrome, Marfan syndrome, tuberous sclerosis, Turner syndrome, von Recklinghausen disease, and Hirschsprung disease 5) Vascular diseases - Atherosclerotic disease, coarctation of the aorta and fibromuscular dysplasia, 6)cranial trauma, radiation injury, parasellar tumors, and hypertension etc. These associations may not necessarily be causative but do warrant consideration due to impact on treatment.(Mainly neurosurgical operation.) The incidence of moyamoya disease is highest in Japan. The prevalence of MMD is 1 person per 100,000 population. The prevalence and incidence of moyamoya disease in Japan has been reported to be 3.16 cases and 0.35 case per 100,000 people, respectively. With regard to sex, the female-to-male ratio is 1.4:1. A bimodal peak of incidence is noted, with symptoms occurring either in the first decade(5-10yr) or in the third and fourth decades (30-40yr)of life. Mortality rates of moyamoya disease are approximately 10% in adults and 4.3% in children. Death is usually from hemorrhage. In aspect of life insurance, MR is 1700%, EDR is 16 per 1000 persons. Children and adults with moyamoya disease (MMD) may have different clinical presentations. The symptoms and clinical course vary widely from asymptomatic to transient events to severe neurologic deficits. Adults experience hemorrhage more commonly; cerebral ischemic events are more common in children. Children may have hemiparesis, monoparesis, sensory impairment, involuntary movements, headaches, dizziness, or seizures. Mental retardation or persistent neurologic deficits may be present. Adults may have symptoms and signs similar to those in children, but intraventricular, subarachnoid, or intracerebral hemorrhage of sudden onset is more common in adults. Recently increasing diagnosis of MMD with MRI, followed by surgical operation is noted. MMD needs to be considered as the "CI" state now in life insurance fields.

• Journal of the Korean Dietetic Association
• /
• v.10 no.4
• /
• pp.467-475
• /
• 2004

The purposes of this exploratory study were to a) verify the first image remember percentage about foodservice and the desire to eat, b) identify detail attributes on the 'food taste' and 'menu variety', the most important problem of the foodservice, c) decide the ranking for improvement of the identified detail attributes, and d) applicate from customer feedback to foodservice operation in the B&I(business & industry) foodservice. For the more reliable result, customer opinion was collected by qualitative research methodology, such as open-ended questionnaire and in-depth interview. The result was followed as : the firstly, the operation circumstance was total 6,700 meal number a day through in-depth interview and 3 types of meal was served. The secondly, the average usage a week was the 7.4 times(B foodservice(B1F)) and the 1.8 times(A foodservice(3F)), respectively. Using reasons of foodservice were 'broad extent', 'menu type', 'shifting convenience' and etc on B foodservice(B1F) and 'menu type', 'clean space' and etc on A foodservice(3F), but the disadvantages of both foodservice were 'complication on peak time', 'the decline of food taste', and 'the absence of menu variety'. 'The decline of food taste' and 'the absence of menu variety' were pointed out the problem asked immediate improvement. The thirdly, it was examined that the first remember about foodservice were 'menu type' and 'foodservice environment' on A foodservice(3F) and 'foodservice environment(atmosphere)' on B foodservice(B1F). The last result, the detail attributes about food taste were ranked respectively 'a salt taste', 'balance of 5 taste at a meal', 'taste of food characteristic' and the unsatisfaction attributes about menu variety were ranked respectively 'serving frequently a same menu', 'the absence of various taste', 'using frequently a same cooking preparation'.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3469-3476
• /
• 2015

The Korea Academia-Industrial cooperation Society. The Korea Academia-Industrial cooperation Society. In Korea, the territory has east high west low type and the rainfall is concentrated in the summer season. A nation having these topography and precipitation condition like Korea has to basically needs support of hardware alternatives. However, the right places decrease gradually and the resistance of the public opinion for national water resources policy stiffens gradually. The climate change has an effect in water resources fields and has a close relation. In the present study, therefore, future inflow of Miryang multipurpose dam basin is estimated by using SWAT model applied RCP 4.5 and 8.5 scenarios of "Korea Meteorological Administration" and considering the results, the future direction is purposed to operate the dam. As a result, the rainfall pattern is changed from traditional peak form to flat form. The dam operation rule in accordance with changing precipitation pattern has to be modified from the conventional operation rule and a new plan has to be established to meet a situation.

• Journal of Chest Surgery
• /
• v.29 no.11
• /
• pp.1232-1240
• /
• 1996

From January 1990 through June 1995, we operated on 121 patients who were suspected for pulmonary tuberculosis without definite final diagnosis. After operation the final pathologic diagnoses were as follows: 68 pulmonary tuberculosis in which 29 were tuberculoma, 23 lung cancer, 16 bronchiectasis, 6 aspergilloma, 2 lung abscess, 2 benign cyst and 4 others. In 121 cases, 81 were male and 40 were female and the peak age incidence was 4th decade in tuberculosis (39.7%) and 6th and 7th decade in lung cancer (69.6%). The diagnoses in 44 cases presented roentgenographically as pulmonary nodules were pulmonary tuberculosis(29 cases) and lung cancer(15 cases). Tuberculous nodules tended to be smaller in size with calcification and satellite lesions compared to carcinomas. Indications for operation were solitary nodules 44 cases (36.4%); destroyed lobe 31(25.6%); hemoptysis 25 (20.7%); cavitary lesion 11(9.1 %); bronchostenosis 3 (2.5%); destroyed lung 5(4.1 %) and destroyed lung with empyema 2(1.7%). We conclude that preoperatively suspected pulmonary tuberculosis should be distinguished from various pulmonary lesions such as carcinoma, bronchiectasis, aspergilloma, lung abscess and benign cyst. For the possibility of carcinoma, pulmonary nodules of size greater than 3cm, non-calcified, non satellite lesion, newly developed nodule even under the anti-tuberculous medication, negative PPD skin test with elevated CEA level are recommended for an early resectional surgery and follow-up and delayed surgery is recommended in cases such as pulmonary nodules less than 3 cm in size with calcification, satellite lesion, positive PPD skin reaction and elevated ESR, CRP, ALP levels.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.155.2-155.2
• /
• 2013

Strain-relaxed SiGe layer on Si substrate has numerous potential applications for electronic and opto- electronic devices. SiGe layer must have a high degree of strain relaxation and a low dislocation density. Conventionally, strain-relaxed SiGe on Si has been manufactured using compositionally graded buffers, in which very thick SiGe buffers of several micrometers are grown on a Si substrate with Ge composition increasing from the Si substrate to the surface. In this study, a new plasma process, i.e., the combination of PIII&D and HiPIMS, was adopted to implant Ge ions into Si wafer for direct formation of SiGe layer on Si substrate. Due to the high peak power density applied the Ge sputtering target during HiPIMS operation, a large fraction of sputtered Ge atoms is ionized. If the negative high voltage pulse applied to the sample stage in PIII&D system is synchronized with the pulsed Ge plasma, the ion implantation of Ge ions can be successfully accomplished. The PIII&D system for Ge ion implantation on Si (100) substrate was equipped with 3'-magnetron sputtering guns with Ge and Si target, which were operated with a HiPIMS pulsed-DC power supply. The sample stage with Si substrate was pulse-biased using a separate hard-tube pulser. During the implantation operation, HiPIMS pulse and substrate's negative bias pulse were synchronized at the same frequency of 50 Hz. The pulse voltage applied to the Ge sputtering target was -1200 V and the pulse width was 80 usec. While operating the Ge sputtering gun in HiPIMS mode, a pulse bias of -50 kV was applied to the Si substrate. The pulse width was 50 usec with a 30 usec delay time with respect to the HiPIMS pulse. Ge ion implantation process was performed for 30 min. to achieve approximately 20 % of Ge concentration in Si substrate. Right after Ge ion implantation, ~50 nm thick Si capping layer was deposited to prevent oxidation during subsequent RTA process at $1000^{\circ}C$ in N2 environment. The Ge-implanted Si samples were analyzed using Auger electron spectroscopy, High-resolution X-ray diffractometer, Raman spectroscopy, and Transmission electron microscopy to investigate the depth distribution, the degree of strain relaxation, and the crystalline structure, respectively. The analysis results showed that a strain-relaxed SiGe layer of ~100 nm thickness could be effectively formed on Si substrate by direct Ge ion implantation using the newly-developed PIII&D process for non-gaseous elements.