• 한국정보통신학회논문지
• /
• 제12권12호
• /
• pp.2159-2164
• /
• 2008

유비쿼터스 헬스케어 시스템은 사용자의 건강 정보를 감독하고 관리하는 시스템이며, 이 헬스케어 시스템에서 가장 중요한 점은 측정된 건강 데이터의 정확성이다. 그러나 실생활에서는 사용자의 움직임 에 따라 그 정확성이 현저하게 달라진다. 따라서 건강 정보 정확성을 향상시키기 위해 본 연구에서는 심박수 추출에 있어 새로운 맥파 최대점 검출 알고리즘을 제안하였고, 제안된 알고리즘은 다중 하위 대역 필터와 퍼지 추론기를 이용하여 동잡음이 포함된 PPG 신호에서 맥파의 최대점을 검출하기 위한 것이다. 제안된 알고리즘에 대한 성능평가 실험에서 복잡한 동잡음에서도 맥파 최대점 추출이 가능함을 보였다.

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1664-1672
• /
• 2015

This paper proposes a series arc fault detection algorithm which incorporates peak voltage and harmonic current detectors for single-phase boost power factor correction (PFC) rectifiers. The series arc fault model is also proposed to analyze the phenomenon of the arc fault and detection algorithm. For arc detection, the virtual dq transformation is utilized to detect the peak input voltage. In addition, multiple combinations of low- and high-pass filters are applied to extract the specific harmonic components which show the characteristics of the series arc fault conditions. The proposed model and the arc detection method are experimentally verified through a boost PFC rectifier prototype operating under the grid-tied condition with an artificial arc generator manufactured under the guidelines for the Underwriters Laboratories (UL) 1699 standard.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.188-191
• /
• 2001

Generally, main factors of tool damage are cutting speed, feed rate and depth of cut. The increase of those factors can cause tool breakage or worsen product quality such as machining accuracy deterioration. Those three factors are concerned with cutting force. Cutting force reaches at its maximum value when cutter blade cuts away the object directly, and it is the time when tool damages are at high probability. In this study, we detect the maximum cutting force affecting tool damage and control the maximum cutting force based on the measured peak force.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
• /
• pp.106-109
• /
• 2000

The diode characteristics for therapy radiation sensor have been studied by irradiating therapy radiation from the MM22 microtron accelerator. Signal processing has been performed in the pulse mode which can process the signal fast. We have designed integrator, peak detector and synchronization circuit to detect diode signal in the pulse mode for implementation of portal image. We also read the diode signal by A/D board and displayed the peak value with LabView program. Because the quality of portal image obtained by film in the case of therapy radiation is much worse than that of diagnostic film, Digital radiography system by rectifier diode detector was suggested for portal Image.

• 산업기술연구
• /
• 제19권
• /
• pp.197-208
• /
• 1999

The process of localization of cracks and movement of the fracture process zone(FPZ) was studied using the acoustic-emission(AE) techniques. The rate of AE events and sources of AE activity were studied for mortar and rock specimens loaded in uniaxial compression. A series of transducers could be used to detect and AE activity. Based on the time differences between detection of the event at different transducers, source of AE activity could be detected. The rate of AE events increased sharply before peak load. The highest rate occurred just after peak load was attained. The effective crack length estimated from the modified linear-elastic fracture mechanics seemed consistent with the optical and AE measurements.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.411-414
• /
• 2000

Optical Triangulation Probes (OTPs) are widely used for their simple structure. high resolution, and long operating range. However, errors originating from speckle, inclination of the object, source power fluctuation, ambient light, and noise of the detector limit their usability. In this paper, we propose new design criteria for an error-reduced OTP. The light source module for the system consists of an incoherent light source and a multimode optical fiber for eliminating speckle and shaping a Gaussian beam Intensity profile. A diffuse-reflective white copy paper, which is attached to the object, makes the light intensity distribution on the change-coupled device(CCD). Since the peak positions of the intensity distribution are not related to the various error sources, a sub-pixel resolution signal processing algorithm that can detect the peak position makes it possible to construct an error-reduced OTP system

• 방송공학회논문지
• /
• 제7권4호
• /
• pp.291-299
• /
• 2002

본 논문은 밝기 변화가 심한 비디오 시퀀스에 대해 효율적인 움직임 보상 알고리즘을 제안한다 제안한 알고리즘에서는 화면간의 밝기 변화 변수들을 추정하고 지역적인 움직임 보상을 수행한다. 밝기 변화가 심한 화면을 검출하기 위해 화면간의 히스토그램의 크로스 엔트로피를 계산하여 밝기 변화가 심한 화면을 그렇지 않은 화면과 나누어 불필요한 계산량을 줄였다. 밝기 변화가 심한 비디오 시퀀스에 대한 실험결과 제안한 알고리즘은 기존의 알고리즘에 비해 적은 계산량으로 높은 PSNR (peak signal to noise ratio) 성능을 나타내었다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권8호
• /
• pp.365-370
• /
• 2003

This research aims to develop an indicator-free DNA chip using micro-fabrication technology. At first, we fabricated a DNA microarray by lithography technology. Several probe DNAs consisting of thiol group at their 5-end were immobilized on the gold electrodes. Then indicator-free target DNA was hybridized by an electrical force and measured electrochemically in potassium ferricyanide solution. Redox peak of cyclic-voltammogram showed a difference between target DNA and mismatched DNA in an anodic peak current. Therefore, it is able to detect various genes electrochemically after immobilization of various probe DNAs and hybridization of indicator-free DNA on the electrodes simultaneously It suggested that this DNA chip could recognize the sequence specific genes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 영호남 합동 학술대회 및 춘계학술대회 논문집 센서 박막 기술교육
• /
• pp.71-73
• /
• 2006

This research aims to develop a multiple channel electrochemical DNA chip using micro- fabrication technology. At first, we fabricated a high integrated type DNA chip array by lithography technology. Several probe DNAs consisting of thiol group at their 5-end were immobilized on the gold electrodes. Then target DNAs were hybridized by an electrical force. Redox peak of cyclic-voltammogram showed a difference between target DNA and mismatched DNA in the anodic peak current. Therefore. it is able to detect a various genes electrochemically after immobilization of a various probe DNA and hybridization of label-free DNA on the electrodes simultaneously. It suggested that this DNA chip could recognize the sequence specific genes.

• 융합신호처리학회논문지
• /
• 제5권4호
• /
• pp.287-293
• /
• 2004

본 논문은 밝기 변화가 심한 비디오 시퀀스에 대해 효율적인 움직임 보상 알고리즘을 제안한다. 제안한 알고리즘에서는 화면간의 밝기 변화 변수들을 추정하고 지역적인 움직임 보상을 수행한다. 밝기 변화가 심한 화면을 검출하기 위해 연속되는 두 프레임간의 히스토그램의 크로스 엔트로피를 계산하여 밝기 변화가 심한 화면을 그렇지 않은 화면과 나누어 밝기 변화가 심하지 않은 경우에 발생할 수 있는 불필요한 계산량을 줄였다. 밝기 변화가 심한 비디오 시퀀스에 대한 실험결과 제안한 알고리즘은 기존의 알고리즘에 비해 적은 계산량으로 높은 PSNR (peak signal to noise ratio) 성능을 나타내었다.