• Macromolecular Research
• /
• v.17 no.8
• /
• pp.616-622
• /
• 2009

In-depth understanding of the influence of hot pressing and melt processing on the properties of thermoplastic polyurethane (TPU) is critical for effective mechanical recycling of TPU scraps. Therefore, this study focused on the effects of hot pressing and melt mixing on molecular weight (MW), polydispersity index (PDI), melt index (MI), characteristic IR peaks, hardness, thermal degradation and mechanical properties of TPU. The original TPU pellet (o-TPU) showed two broad peaks at lower and higher MW regions. However, four TPU film samples, TPU-0 prepared only by hot pressing of o-TPU pellet and TPU-1, TPU-2 and TPU-3 obtained by hot pressing of melt mixed TPUs (where the numbers indicate the run number of melt mixing), exhibited only a single peak at higher MW region. The TPU-0 film sample had the highest $M_n$ and the lowest PDI and hardness. The TPU-1 film sample had the highest $M_w$ and tensile modulus. As the run number of melt mixing increased, the peak-intensity of hydrogen bonded C=O stretching increased, however, the free C=O peak intensity, tensile strength/elongation at break and average MW decreased. All the samples showed two stage degradations. The degradation temperatures of TPU-0 sample (359 $^{\circ}C$ and 394 $^{\circ}C$)were higher than those of o-TPU (342 $^{\circ}C$ and 391 $^{\circ}C$). While all the melt mixed samples degraded at almost the same temperature (365 $^{\circ}C$ and 381 $^{\circ}C$). The first round of hot pressing and melt mixing was found to be the critical condition which led to the significant changes of $M_n$/$M_w$/PDI, MI, mechanical property and thermal degradation of TPU.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.43-50
• /
• 2016

NAND flash based storage devices adopts multi-channel and multi-way architecture to improve performance using parallel operation of multiple NAND devices. However, multiple NAND devices consume higher current and peak power overlap problem influences on the system stability and data reliability. In this paper, current waveform is measured for erase, program and read operations, peak current and model is defined by profiling method, and estimated probability of peak current overlap among NAND devices. Also, system level TLM simulator is developed to analyze peak overlap phenomenon depending on various simulation scenario. In order to remove peak overlapping, token-ring based simple power management method is applied in the simulation experiments. The optimal peak overlap ratio is proposed to minimize performance degradation based on relationship between peak current overlapping and system performance.

• Applied Chemistry for Engineering
• /
• v.33 no.3
• /
• pp.302-308
• /
• 2022

The PdO nanoparticle with large surface area was selected to solve the environmental pollution problem at fire range caused by high energy explosives research department explosive (RDX) and high melting explosive (HMX). By simulating water pollution, RDX and HMX nitramine explosives were dissolved in water, followed by the degradation reaction at 313 K by adding PdO. In order to measure the degradation reaction rate of explosives, ¹H NMR was used, which can monitor the reaction rate without losing sample during reaction, and observe the progress of the reaction through the spectrum. The results showed that the degradation of RDX and HMX by PdO nanoparticles are pseudo-first order reaction. The degradation of explosives compounds were observed via the chemical shift and peak intensity analysis of NMR peaks. The measured rate constants for these reactions of RDX and HMX were 2.10 × 10^-2 and 6.35 × 10^-4 h^-1, respectively. This study showed that the application of PdO nanoparticles for explosives degradation is a feasible option.

• Transactions of the Korean hydrogen and new energy society
• /
• v.9 no.3
• /
• pp.111-118
• /
• 1998

The intrinsic degradation behavior of $(V_{0.53}Ti_{0.47})_{0.925}Fe_{0.075}$ alloy with BCC structure and the two plateau regions (the low and high plateau region) has been investigate during the temperature-induced hydrogen absorption-desorption cycling (thermal cycling). After 400 thermal cycles between room temperature and $600^{\circ}C$ under 10atm $H_2$, the total reversible hydrogen absorption capacity decreased by about 40%. From thermal desorption analysis it was found that the degradation behavior at each plateau region was different. In addition, XRD analysis showed that the crystal structure of the sample in de-hydrided state was changed from BCC to BCT after degradation, and that of the sample in hydrided state it was maintained as FCC although peaks were broadened after degradation. From the result of static isothermal hydrogenation treatment it were found that crystal structure change from BCC to BCT was caused by the thermal energy. TEM analysis showed that the peak broadening was due to the formation of an amorphous phase in FCC matrix.

• The Korean Journal of Rheology
• /
• v.11 no.1
• /
• pp.9-17
• /
• 1999

Viscoelastic characteristics of cured phenolic resin/carbon fiber composite materials were investigated through glass transition and degradation reaction processes in the high temperature region up to $400^{\circ}C$. A typical glass transition of the cross-linked thermoset polymer was followed by irreversible degradation reactions, which were exhibited by the increasing storage modulus and loss modulus peak. A degradation master curve was constructed by using the vertical and horizontal shift factors, both of which complied well with the Arrhenius equation in light of the kinetic expression of degradation rate constants. Using an analogy to the Havriliak-Negami equation in dielectric relaxation phenomena, a viscoelastic modeling methodology was developed to characterize the frequency- and temperature-dependent complex moduli of the degrading thermoset polymer composite systems. The temperature-dependent relaxation time of the degrading composites was determined in a continuous fashion and showed a minimum relaxation time between the glass transition and degradation reaction regions. The capability of the developed modeling methodology was demonstrated by describing the complex behavior of the viscoelastic complex moduli of reacting phenolic resin composite systems.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.3
• /
• pp.431-436
• /
• 2002

Effects of fertilizer additions for oil degradation were examined in sand seashore mesocosms. Within 37 days, up to $85\%$ removal was achieved by the addition of slow-release type fertilizer (SRF) with the initial degradation rate of 423.3 mg oil $(kg sand)^-1\;day^-1$. The removal was mostly of biological origin based on the changes of $C_17$ /pristane and $C_18$/phytane ratios from 2.60 to 0.81 and from 3.55 to 1.29, respectively. The addition of oleophilic fertilizer (Inipol EAP22) was less effective and resulted in the removal of $64\%$ of the added oil ($3\%$, v/v) with a lower initial degradation rate. Petroleum-degrading bacteria had achieved a value of $1{\times}10^8$ CFU $(g sand)^-1$ at Day 3 and this peak exactly coincided with the initial degradation in the SRF-treated mesocosm. In this mesocosm, surface tension values were decreased drastically during Days 3 and 8, suggesting that microbially-produced surface-active agents actively enhanced the oil degradation rate and cell proliferation. Although the Inipol-treated mesocosm appeared to show significantly enhanced oil degradation compared to that of the untreated control mesocosm, Inipol was found to be less effective than SRF in enhancing a true oil-degrader when compared under similar experimental conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.4
• /
• pp.415-423
• /
• 2016

High PAPR (Peak-to-Average Power Ratio) characteristic causes some problems like system performance degradation and OOB (Out-of-Band) power increasement under the HPA (High Power Amplifier) nonlinearity condition. UFMC (Universal Filtered Multi-Carrier) and FBMC (Filter Bank Multi-Carrier) are regarded as 5G(Generation) candidate waveforms. In this paper, we evaluate and analyze performance of these systems with DFT-s (Discrete Fourier Transform Spreading) technique under the nonlinear HPA environment. In this paper, we describe OFDM (Orthogonal Frequency Division Multiplexing), UFMC, FBMC, DFT-s-OFDM, DFT-s-UFMC, and DFT-s-FBMC system, and evaluate BER (Bit Error Rate) performance of these systems. As simulation results, BER performance degradation by HPA nonlinearity of DFT-s-OFDM and DFT-s-UFMC is greatly overcome by DFT spreading technique. However, BER performance degradation by HPA nonlinearity of DFT-s-FBMC system is little overcome.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11C
• /
• pp.1079-1086
• /
• 2007

In this paper, we propose a CCP (Companding Combined with Predistorter) scheme that maintains BER (Bit Error Rate) performance of systems, while effectively reducing PAPR (Peak-to-Average Power Ratio) of OFDM (Orthogonal Frequency Division Multiplexing) signals, independent of nonlinear property of HPAs (High Power Amplifiers). The proposed CCP scheme combines the conventional companding scheme proposed by the authors with the predistorter, in order to prevent degradation of BER performance caused by signal distortion from nonlinear property of the HPA and the compression property of the companding scheme. Hence, the proposed scheme effectively reduces the PAPR and simultaneously maintains the BER performance, independent of nonlinear property of the HPA. Simulation results showed that the proposed CCP scheme provides the lowest total degradation for all the modulations, when comparing with the companding scheme proposed by Wang and the clipping scheme.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.209-217
• /
• 2002

We studied the mechanism of orientation of polyimide molecules which were irradiated by polarized UU (PUV) using polarized Fourier transform infrared (FT-IR) spectroscopy and ultraviolet (UV) spectroscopy, According to the measured UV spectra, we found PI films mainly absorb UV light less than 350 nm wavelength, therefore, UV light less than 360 nm induces photochemical reaction of PI. PUV irradiation of PI films caused decrease of all peak intensities in the FT-IR spectra. except the newly formed broad peak at $3244 cm^{-1}$, due to degradation of the PI molecules. The remaining PI molecules after photo-degradation showed predominantly perpendicular molecular orientation to the irradiated PUV polarization direction, due to the preferential degradation of PI molecules parallel to irradiated PUV polarization direction. However the rubbing of PI films induced reorientation of the PI molecules parallel to the rubbing direction. We also investigated the alignment of the liquid crystal by rubbing or PUV irradiation. Liquid crystals align perpendicular to the PUV polarization direction and parallel to the rubbing direction.

• KSBB Journal
• /
• v.9 no.5
• /
• pp.469-474
• /
• 1994

The purpose of the work was to evaluate the feasibility of a biological treatment process for the phenoxy alkanoic herbicide 2,4-D(2,4-dichlorophenoxyacetic acid) as a commercial pesticide. The phenoxy herbicide was 2,4-D amine salts which contained 40%(vol/vol) 2,4-D and 60%(vol/vol) solvent. A microbial consortium has been derived by enrichment with 2,4-D. The consortium utilized 2,4-D as the sole source of carbon and energy. Optimal pH on the 2,4-D degradation was 7.0 in this experiment. As concentrations of 2,4-D were increased, the degradation by microbial consontium became inhibited. The amendment with yeast extract and ascorbic acid accelerated the degradation of 2,4-D. High performance liquid chromatography methodology was used to measure 2,4-D and it also resolved 2,4-DCP(2,4-dichlorophenol), the corresponding phenol as intermediate. Gas chromatography-mass spectrometry was used for preliminary identification of the intermediate 2,4-DCP. UV scans of spent cultures showed that the maximum absorption of 2,4-D at the wavelength of 283 nm was decreased toward the end of incubation, but the consortium displayed no detectable spectral changes or peak shifts in the UV absorbance.