• Transactions on Electrical and Electronic Materials
• /
• v.12 no.3
• /
• pp.89-92
• /
• 2011

Hydrogenated amorphous carbon (a-C:H) films were deposited by plasma enhanced chemical vapor deposition on silicon substrates. a-C:H thin film was irradiated to a typical He-Cd laser to study its emitting properties. The photoluminescence (PL) intensity during the irradiation achieved a maximum value when 2,000 seconds elapsed. Fourier transform infrared measurement revealed a-C:H thin film suffered transformation from a polymer-like to graphite-like phase during laser irradiation. Thermal annealing was done at various temperatures, ranging from room temperature to $400^{\circ}C$ in the atmosphere, to investigate structural changes in a-C:H film by heat generation during the emission. PL intensity of a-C:H thin film increased 1.5 times without apparent structural change, as annealing temperature increased up to $200^{\circ}C$. However, a-C:H film above $200^{\circ}C$ exhibited significant decrease of PL accompanying dehydrogenation. This led to a red shift of the PL peak.

• Computers and Concrete
• /
• v.20 no.5
• /
• pp.529-537
• /
• 2017

Excessively elevated temperature can lead to cracks in prestressed concrete (PC) continuous bridge with box girder on the pier top at cement hydration age. This paper presents a case study for evaluating the behavior of PC box girder during the early hydration age using a two-stage computational model, in the form of computer program ANSYS, namely, 3-D temperature evaluation and determination of mechanical response in PC box girders. A numerical model considering time-dependent wind speed and ambient temperature in ANSYS for tracing the thermal and mechanical response of box girder is developed. The predicted results were compared to show good agreement with the measured data from the PC box girder of the Zhaoshi Bridge in China. Then, based on the validated numerical model three parameters were incorporated to analyze the evolution of the temperature and stress within box girder caused by cement hydration heat. The results of case study indicate that the wind speed can change the degradation history of temperature and stress and reduce peak value of them. The initial casting temperature of concrete is the most significant parameter which controls cracking of PC box girder on pier top at cement hydration age. Increasing the curing temperature is detrimental to prevent cracking.

• Journal of Korea Multimedia Society
• /
• v.14 no.8
• /
• pp.1000-1009
• /
• 2011

Image interpolation is a technique which estimates the non-allocated pixel values on image scale-transform. It requires minimum computational complexity and minimum image quality degradation on the interpolated resultant images. In this paper we propose an image interpolation method using iterative error estimation. The proposed method consists of the following five steps: loss-information computational step, loss-information estimation step, loss-information application step, error computation step, and error application step. The experimental results obtained show that the average PSNR is increased by 3.3dB, subjective image quality is enhanced and the minimum computation complexity is decreased by 83%. The proposed image interpolation algorithm may be helpful in various applications such as image reconstruction and enlargement.

• ALGAE
• /
• v.25 no.1
• /
• pp.27-35
• /
• 2010

Marked declines in seagrass meadows are increasingly being reported from coasts around Korea and many regions of the world. The transplantation of seagrasses has been attempted to mitigate and control their degradation from a range of anthropogenic factors. In this study, Zostera marina shoots, which were collected from a donor bed in Koje Bay, were transplanted in Jindong Bay in December 2004. In 2008, a comparative investigation of shoot morphology, growth, and reproduction strategy of Z. marina was carried out between the donor and transplant sites to assess their adaptation success. Shoot height, individual shoot weight, and leaf productivity at the transplant site were significantly greater than those at the donor site. However, below-/aboveground tissue ratio was significantly lower at the transplant site compared to the donor site. Z. marina survival was maintained through vegetative reproduction, while peak season for lateral shoot recruitment was late winter for both donor and transplant site populations. However, vegetative reproduction mainly occurred during late winter and spring at the transplant site, whereas lateral shoots were evident across all seasons except late spring in the donor site. More pronounced seasonal variations were found at the transplant site compared to the donor site. These results indicate that Z. marina populations at the two sites possess distinct phenotypic variations induced by different environmental conditions, and Z. marina transplants have adapted well to the new transplant environment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.96-96
• /
• 2010

To improve surface wettability, each sample was treated by atmospheric pressure plasma (APP) using dielectric barrier discharge (DBD) system. Argon and oxygen gases were used for treatment gas to modify the $TiO_2$ surface by APP with RF power range from 50 to 200 W. Water contact angle was decreased from $20^{\circ}$ to $10^{\circ}$ with argon only. However, water contact angle was decreased from $20^{\circ}$ to < $1^{\circ}$ with mixture of argon and oxygen. Water contact angle with $O_2$ plasma was lower than water contact angle with Ar plasma at the same RF power. It seems to be increasing the polar force of $TiO_2$ surface. Also, analysis result of X-ray photoelectron spectra (XPS) shows the increase of intensity of O1s shoulder peak, resulting in increasing of surface wettability by APP. Moreover, each water contact angle increased according to increase past time. However, contact angle increase with plasma treatment was lower than without plasma treatment. Additionally, the efficiency of $TiO_2$ photocatalyst was improved by plasma surface-treatment through the degradation experiment of phenol

• Fibers and Polymers
• /
• v.6 no.1
• /
• pp.13-18
• /
• 2005

PLA/LPCL/HPCL blend fibers composed of poly (lactic acid) (PLA), low molecular weight poly ($\varepsilon$-caprolactone) (LPCL), and high molecular weight poly ($\varepsilon$-caprolactone) (HPCL) were prepared by melt blending and spinning for bioab­sorbable filament sutures. The effects of blending time and blend composition on the X-ray diffraction patterns and tensile properties of PLA/LPCL/HPCL blend fibers were characterized by WAXD and UTM. In addition, the effect of in vitro degra­dation on the weight loss and tensile properties of the blend fibers hydrolyzed during immersion in a phosphate buffer solu­tion at pH 7.4 and 37$^{\circ}C$ for 1-8 weeks was investigated. The peak intensities of PLA/LPCL/HPCL blend fibers in X-ray diffraction patterns decreased with an increase of blending time and LPCL contents in the blend fibers. The weight loss of PLA/LPCL/HPCL blend fibers increased with an increase of blending time, LPCL contents, and hydrolysis time while the tensile strength and modulus of the blend fibers decreased. The tensile strength and modulus of the blend fibers were also found to be increased with an increase of HPCL contents in the blend fibers. The optimum conditions to prepare PLA/LPCL/HPCL blend fibers for bioabsorbable sutures are LPCL contents of $5 wt\%, HPCL contents of $35 wt\%, and blending time of 30 min. The strength retention of the PLA/LPCL/HPCL blend fiber prepared under optimum conditions was about $93.5\% even at hydrolysis time of 2 weeks.

• Geomechanics and Engineering
• /
• v.20 no.2
• /
• pp.113-120
• /
• 2020

Rock damage is the main cause of accidents in underground engineering. It is difficult to predict rock damage accurately by using only one parameter. In this study, a rock failure prediction model was established by using stress, energy, and damage. The prediction level was divided into three levels according to the ratio of the damage threshold stress to the peak stress. A classification predicting model was established, including the stress, energy, damage and AE impact rate using Bayesian method. Results show that the model is good practicability and effectiveness in predicting the degree of rock failure. On the basis of this, a multi-parameter classification predicting deterioration model of rock failure was established. The results provide a new idea for classifying and predicting rockburst.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1995.10a
• /
• pp.185-193
• /
• 1995

The softening behaviors of concrete have been the object of numerous experimental and numerical studies, because the load carrying capacity of cracked concrete structure is not zero. Numerical studies are devoted to the investigation of three-dimensional softening behaviors of concrete on the basis of a viscoplastic theory, which may be able to represent the effects of plasticity and also of rheology. In order to properly describe material behaviors corresponding to different stress levels, two surfaces in stress space are adopted; one is a yield surface, and the other is a failure or bounding surface. When a stress path reaches the failure surface, it is considered that the softening behaviors are initiated as micro-cracks coalesce and are simulated by assuming that the actual strain increments in the post-peak region are less than the equivalent viscoplastic strain increment. The experimental studies and the finite element analyses have been carried out under the displacement control. Numerically simulated results indicate that the model is able to predict the essential characteristics of concrete behaviors such as the non-linearity, stiffness degradation, different behaviors in tension and compression, and specially dilatation under uniaxial compression.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.44-51
• /
• 2008

In this paper, we propose a modified clipping scheme for iterative decoding of superposition coding system by losing less power than clipping scheme. Our proposed scheme in superposition coding system shows good performance in peak-to-average power ratio(PAPR) and system performance with the same Clipping Ratio especially in low Clipping Ratio case. Finally in order to alleviate the performance degradation due to clipping noises, we combine a soft compensation algorithm that is combined with soft-input-soft-output(SISO) decoding algorithms in an iterative manner proposed by [1][2]. Simulation results show that with the proposed scheme, most performance loss can be recovered.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6A
• /
• pp.586-592
• /
• 2006

In this paper, a novel detection method called the joint multiple frequency cell (JMFC) detection is addressed for spread spectrum code acquisition in the presence of residual Doppler frequency offset (RDFO). When the RDFO exists, the correlation peak used for detection during the acquisition process is split into several lower neighboring peaks, resulting in severe degradation in the detection performance, and consequently, in the overall acquisition performance. In the JMFC detection, a decision variable for detection is formed by combining several consecutive correlator outputs, so that the reduction in the correlation value due to the RDFO can be alleviated. Numerical results show that the proposed scheme can offer better detection performance over the conventional scheme based on the cell-by-cell detection.