• Journal of agriculture & life science
• /
• v.45 no.3
• /
• pp.69-79
• /
• 2011

This study was conducted to estimate effects of by-products of medical herbs replacing rice straw on in vitro fermentation characteristics. Each trial was composed of five treatments including medical herbs : rice straw (%) = 20 : 80 (T1), 40 : 60 (T2), 50 : 50 (T3), 100 : 0 (T4) and the control. Each treatment had eight fermentation times (3, 6, 9, 12, 24, 36, 48 and 72 hours) with three replications. The gas production and DM degradation were significantly (P<0.05) increased by supplementation, especially T4, during the whole fermentation periods. Methane production increased along with addition of by-products similar to the gas production and DM degradation. The pH values ranged from 5.39 to 6.80 and were significantly (P<0.05) decreased by supplementation of by-products of medical herbs. Microbial growth rates reached the peak at between 36 and 48h, thereafter tended to decrease. Although there were no significant differences in the enzyme activities, there was a tendency of increase in T4 treatment. From above results, the replacement levels, particularly 100% replacement of rice straw by by-products of medical herbs, resulted in improving the in vitro fermentation characteristics such as increasing gas production, microbial growth and DM degradation. Also it may help digestion by increasing enzyme activities.

• Journal of agriculture & life science
• /
• v.45 no.5
• /
• pp.105-113
• /
• 2011

This study was carried out to develop an automatic loading equipment that can load seedling trays on loading position of the seedling bed driving on enclosed-type rail installed for interconnecting each process of raising seedlings in plant factory. The experiment of transferring the seedling tray by monorail pusher was carried out to figure out the required transfer force and problems during push type device of transporting the plastic seedling trays, that has completed its sowing process, which are installed onto the board of different materials. From the results of this experiment, the loading equipment which can exactly load three of the seedling trays orderly on the loading position of the seedling bed was designed and made. When three sowed trays on every board are transferred by pusher with the speed is at 30 cm/s, the maximum peak transfer force with maximum overshooting at initial transient state and the maximum transfer force at stead state are were respectively 32.8 N, 29.4 N on rubber board, 29.7 N, 22.5 N on a wooden board, 26.9 N, 19.6 N on a acrylic board, and 27.6 N, 19.1 N on an iron board. Changes in the transfer force occurred its maximum at the moment when the pusher collided with the tray, after the collision gradually decreased until it became stable. When two or three trays placed it in order of widthwise are transferred, it is occurred the overlapping of the tray's external bracket. The developed automatic loading equipment with PLC controller did not make any operation error through 100 times of tests, its maximum seedling tray loading speed was 2 sec/tray and its maximum error of transferred location of the tray was 0.5 cm.

• Korean Journal of Remote Sensing
• /
• v.25 no.1
• /
• pp.31-44
• /
• 2009

The objective of this study was to measure backscattering coefficients of paddy rice using a L-, C-, and X-band scatterometer system with full polarization and various angles during the rice growth period and to relate backscattering coefficients to rice growth parameters. Radar backscattering measurements of paddy rice field using multifrequency (L, C, and X) and full polarization were conducted at an experimental field located in National Academy of Agricultural Science (NAAS), Suwon, Korea. The scatterometer system consists of dual-polarimetric square horn antennas, HP8720D vector network analyzer ($20\;MHz{\sim}20\;GHz$), RF cables, and a personal computer that controls frequency, polarization and data storage. The backscattering coefficients were calculated by applying radar equation for the measured at incidence angles between $20^{\circ}$ and $60^{\circ}$ with $5^{\circ}$ interval for four polarization (HH, VV, HV, VH), respectively. We measured the temporal variations of backscattering coefficients of the rice crop at L-, C-, X-band during a rice growth period. In three bands, VV-polarized backscattering coefficients were higher than hh-polarized backscattering coefficients during rooting stage (mid-June) and HH-polarized backscattering coefficients were higher than VV-, HV/VH-polarized backscattering coefficients after panicle initiation stage (mid-July). Cross polarized backscattering coefficients in X-band increased towards the heading stage (mid-Aug) and thereafter saturated, again increased near the harvesting season. Backscattering coefficients of range at X-band were lower than that of L-, C-band. HH-, VV-polarized ${\sigma}^{\circ}$ steadily increased toward panicle initiation stage and thereafter decreased, and again increased near the harvesting season. We plotted the relationship between backscattering coefficients with L-, C-, X-band and rice growth parameters. Biomass was correlated with L-band hh-polarization at a large incident angle. LAI (Leaf Area Index) was highly correlated with C-band HH- and cross-polarizations. Grain weight was correlated with backscattering coefficients of X-band VV-polarization at a large incidence angle. X-band was sensitive to grain maturity during the post heading stage.

• Journal of Energy Engineering
• /
• v.28 no.3
• /
• pp.65-79
• /
• 2019

The study attempted to estimate the optimal facility capacity by combining renewable energy sources that can be connected with gas CHP in industrial complexes. In particular, we reviewed industrial complexes subject to energy use plan from 2013 to 2016. Although the regional designation was excluded, Sejong industrial complex, which has a fuel usage of 38 thousand TOE annually and a high heat density of $92.6Gcal/km^2{\cdot}h$, was selected for research. And we analyzed the optimal operation model of CHP Hybrid System linking fuel cell and photovoltaic power generation using HOMER Pro, a renewable energy hybrid system economic analysis program. In addition, in order to improve the reliability of the research by analyzing not only the heat demand but also the heat demand patterns for the dominant sectors in the thermal energy, the main supply energy source of CHP, the economic benefits were added to compare the relative benefits. As a result, the total indirect heat demand of Sejong industrial complex under construction was 378,282 Gcal per year, of which paper industry accounted for 77.7%, which is 293,754 Gcal per year. For the entire industrial complex indirect heat demand, a single CHP has an optimal capacity of 30,000 kW. In this case, CHP shares 275,707 Gcal and 72.8% of heat production, while peak load boiler PLB shares 103,240 Gcal and 27.2%. In the CHP, fuel cell, and photovoltaic combinations, the optimum capacity is 30,000 kW, 5,000 kW, and 1,980 kW, respectively. At this time, CHP shared 275,940 Gcal, 72.8%, fuel cell 12,390 Gcal, 3.3%, and PLB 90,620 Gcal, 23.9%. The CHP capacity was not reduced because an uneconomical alternative was found that required excessive operation of the PLB for insufficient heat production resulting from the CHP capacity reduction. On the other hand, in terms of indirect heat demand for the paper industry, which is the dominant industry, the optimal capacity of CHP, fuel cell, and photovoltaic combination is 25,000 kW, 5,000 kW, and 2,000 kW. The heat production was analyzed to be CHP 225,053 Gcal, 76.5%, fuel cell 11,215 Gcal, 3.8%, PLB 58,012 Gcal, 19.7%. However, the economic analysis results of the current electricity market and gas market confirm that the return on investment is impossible. However, we confirmed that the CHP Hybrid System, which combines CHP, fuel cell, and solar power, can improve management conditions of about KRW 9.3 billion annually for a single CHP system.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.2
• /
• pp.217-223
• /
• 1997

This study was performed to determine if women with day 3 serum inhibin-B concentrations <45pg/ml (conversion factor to SI unit, 1.00) demonstrate a poor response to ovulation induction and assisted reproductive technology outcome to women with inhibin-B${\ge}45pg$/ml, independant of day 3 FSH, E2 and patient age. From Jan 1996 to Dec 1996, 16 volunteers patients who underwent 25 IVF cycles with luteal phase GnRH agonist suppression and HMG stimulation were allocated to the study group. We evaluated day 3 serum inhibin-B, FSH, E2, peak E2, cancellation rate per initiated cycle (%) and clinical pregnancy rate per initiated cycle (%) according to the above two groups and independent of patient age, day 3 FSH, day 3 E2 and all of above combined. Women with day 3 serum inhibin-B${\ge}45pg$/ml demonstrated higher average day 3 inhibin-B level, clinical pregnancy rate per initiated cycle ($20.3{\pm}2.5$ pg/ml vs $80.9{\pm}5.0$ pg/ml, p<0.05; 24.8% vs 8.5%, p<0.05) and lower day 3 FSH level, cancellation rate per initiated cycle ($6.9{\pm}0.3$ mIU/ml vs $8.5{\pm}0.5$ mIU/ml, p<0.05; 1.5% vs 9.0%, p<0.05). Women with day 3 serum inhibin${\ge}45pg$/ml and age<40 year demonstrated higher pregnancy rate per initiated cycle (28.2% vs 7.4%, p<0.05) and lows. day 3 FSH level, cancellation rate per initiated cycle ($6.9{\pm}0.5$ mIU/ml vs $8.2{\pm}0.7$ mIU/ml, p<0.05; 1.0% vs 9.0%, p<0.05). Women with day 3 serum inhibin${\ge}45pg$/ml and day 3 FSH<15mIU/ml demonstrated higher pregnancy rate per initiated cycle (33.5% vs 9.5%, p<0.05) and lower day 3 FSH level, cancellation rate per initiated cycle ($7.7{\pm}0.2$ mIU/ml vs $8.5{\pm}0.5$ mIU/ml, p<0.05; 1.5% vs 10.0%, p<0.05). Women with day 3 serum inhibin${\ge}45pg$/ml and day 3 E2<50pg/ml demonstrated higher pregnancy rate per initiated cycle (30.0% vs 9.5%, p<0.05) and lower cancellation rate per initiated cycle (1.5% vs 9.5%, p<0.05). Women with day 3 serum inhibin${\ge}45pg$/ml, age<40 year, day 3 FSH<15mIU/ml and day 3 E2<50pg/ml demonstrated higher pregnancy rate per initiated cycle (30.0% vs 10.8%, p<0.05) and lower day 3 FSH level, cancellation rate per initiated cycle ($6.8{\pm}0.6$ mIU/ml vs $8.4{\pm}0.9$ mIU/ml, p<0.05; 1.5% vs 7.8%, p<0.05). Therefore women with low day 3 serum inhibin-B concentrations demonstrate a poorer response to ovulation induction and are less likely to conceive a clinical pregnancy though ART relative to women with high day 3 inhibin-B and day 3 serum inhibin-B, in addition to a day 3 FSH, E2 and patient age, appears helpful in prediction in IVF-ET outcome.

• The Journal of Natural Sciences
• /
• v.1
• /
• pp.115-198
• /
• 1987

The present studies were undertaken to elucidate the influence of auxins, auxin-like substance-ethychlozate ("Figaron"),and pH and sort of rooting media on rooted propagation of certainornamental woody plant cuttings, and to see possible changes in internal compositions characterizing after root-promoting treatment as the cutting stage proceeded. The experimental check-up srevealed and summarized as seen in the following;I. Effect of three different auxin treatments on rooting cuttings: 1) Promotive influence of auxin varied according to different concentration levels, hours of dipping treatment of the auxins, and kind of plants. The greatest effect was obtained for Forsythia ksreana with NAA and IBA, for Ligustrurn obtusifolium var. variegatum with NAA and ethychlozate, for Hydrangea macrophylla, Magnolia kobus, and Magnolia liliflora with NAA, lBA and ethychlozate also. The most effective level of the promotive agents was found 200mg/l for NAA, 1000mg/l for IBA, and 200mg/l for ethychlozate. For Weigela florida and Gardenia jasminoides, range of the most effective level was shown relatively wide spread. 2) NAA was more effective at its optimal level of the rooting agent than ethychiozate for Weigela florida, Viburnum awabuki, Forsythia koreana, Acer palmatum 'Nomura', Bouga invillea glabra, Elaeagnus umbellata, Prunus tomentosa, Ligustrum obtusifolium, Pyracantha coccinea, Cestrum noctu rnum, Hydrangea macrophylla, Codiaeum variegatum, Rhododen dron lateritium, and Ilex crenata var. macrophylla, and yet ethychlozate was found either as equally as effective or more so than NAA for Zebrina pendula, Hibiscus syriacus, Fatshedera lizei, Schefflera arboricola, Campsis grandiflo ra, Ixora chinensis, Euonymus japonica, and Magnolia liliflora. On the contrary, no the auxin effect was noted with Lagerstroemia indica, Trachelospermum asiaticum, and Syringa vulgaris. This probably indicates that these species are genetically different for the auxin response.II. Effect of different pH and sorts of cutting media on rooting cuttings: 1) Bougainvillea showed best in rooting for the number and dry weight at pH 6.5, more with ethychlozate than NAA, while Ligustrum did at pH 5.0 more with NAA than ethychlozate. pH 4.0 medium resulted in the best rooting for Rhododendron with NAA, more than ethychlozate. 2) Use of cutting medium with peat: perlite: vermiculite = 1:1:1 showed to give the greatest rooting percent and dry weight, apart from considering the number of roots. This apparently meant the fact that cutting medium has more to do with root growth than root differentiation. Rhododendron yet showed results with cutting media that use of peat: perlite = 2:1 mixed is more effective on rooting than using peat alone.III. Effect of auxinic treatments on rooting cuttings and change in some cutting compositions: 1) Under the climatic conditions of July having temperature $26.3\pm$$2.4^{\circ}C$for cutting bed, new roots of Magnolia started to show up generally 20 days after the cutting was made, whereas Cestrum did much earlier than that, namely 14 days after. 2) Although total carbohydrate content of Magnolia cuttings showed no marked change without auxin treatment, it did so with the treatment, especially 30 days after the start of cutting. Cestrum cuttings demonstrated a gradual in crease in total carbohydrate content as rooting took place, and the content became reduced more with auxin than with out, just about when rooting proceeded to 14 days after the start of cutting. 3) Magnolia generally showed an increase in total nitrogen content as rooting proceeded more, and Cestrum showed a decrease in total nitrogen of cuttings. The auxin treatment exhibited no pertinent relation with change in plant nitro gen when rooting is promoted with auxin treatment. 4) An abrupt drop of total sugar and reducing sugar was noticed as Magnolia rooting started, and this reduction was parti cularly outstanding with auxin treatment. Starch content also was decreased in the later stage of cutting with auxin treatment, and was rather increased without auxin. Although sugar content soon increased as cutting started with auxin treatment in the case of Cestrum, it became reduced after rooting took place. 5) Total phenol content increased with rooting, and this was especially true when rooting started. This increase was reversed somehow regardless of auxin treatment. A decrease in phenol of Magnolia was found more striking with auxin than without in the later stage of the cutting period. 6)Avena coleoptile test for auxin-like substances presented the physiologically active factor is more in easy-to-root Magnolia liliflora than hard-to-root Magnolia kobus, and the activity of auxin-like substances was much increased with auxin treatment. The increase in the growth promoting substances was markedly pronounced when rooting just started. The active growth substances decreased in the later stage of cutting, and certain inhibitory substances started appearing. Cestrum also showed physiologically similar growth promoting substances accompanying auxin-like active substances if auxin is treated, and some strong inhibitory substances seemed to appear in the later stage of cutting. 7) Mung-bean-rooting test indicated biologically that endogenous growth substances in Magnolia all promoted mung-bean rooting, and activity of the growth substances apparently stimulated mung-bean rooting with auxin more than without. Here auxin treatment seemed to give a rise to an increased activity of endogenous growth substances in cuttings. This activity was found much greater with either NAA or IBA than ethychlozate, and showed its peak of the activity when rooting first started taking place. Certain inhibitory substances for Avena coleoptile growth strongly promoted mung-bean rooting, and it was also much like in the case of Cestrum.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.2
• /
• pp.191-205
• /
• 1995

The carrier materials used for the development of bacterial inoculants to be effective in field were made with various carrier materials of two major forms, alginate bead and powder inoculants. Inoculants were prepared after mixing those carrier materials with Pseudomonas fluorescens SSL3 and Bacillus subtilis B5, and the treatment effects of each inoculants was investigated on cucumber, tomato, pepper and potato. Survival density of SSL3 and B5 in various carrier materials for duration of storage and the bead inoculants were better than the powder. In the powders, survival rate increased in carrier materials treated 5% skimilk. The growth condition of microorganisms in carrier materials is good at powder. When they were preserved in the long period, contamination is problem. Scanning(200 to 600nm) of the P. fluorescens SSL3 supernatant in centrifuged MKB broth incubated for 48h had two main peaks, pyochelin(300nm) and pyoverdin(400nm). The potato yield in field experiments of spring, treated with bead formulas showed increase of 22~29% in whole potato breeds as compared with control, because the bead formulas degraded, and released the antibiotic microorganisms in slow and constant rate. In the pot experiment, there were significant difference in soil, wheatbran, and bead formed wheatbran.

• Journal of Sericultural and Entomological Science
• /
• v.22 no.1
• /
• pp.7-25
• /
• 1980

Some substances and freezing tolerance in the mulberry (Morus species) branch have been studied on the basis of varietal differences and harvesting times along with harvesting methods in autumn. The results obtained are summarized as follows; 1. The highest freezing tolerance was shown in the varieties of Yongcheon-chou, Jasan, Kang-weon No. 3 and Ichihei, the medium in Roso. Kairyonezumigaeshi, Yanagida and Kokuso No. 28, and the lowest in Ichinose, Mokuso, Kokuso No. 21 and Suweousang No. 3. 2. There was a signifiant negative correlation (r= -0.59＊) between death atop percentage in the field and the temperature required to kill 50% of the mulberry buds (T$_{50}$) with the harvesting times and methods in autumn. Cold hardening occurred in the early through the end of September with the peak at the mid-september. During this period, leaf harvest decreased freezing tolerance with remarkable decrease due to picking all the leaves and leaving several leaves at the base of branch. Greater cold hardening was induced by leaving several leaves after topping. 3. Negative correlations were observed between freezing tolerance and the contents of soluble (r =-0.70＊) and crude (r= -0.70＊) protein. However, positive correlations were shown between freezing tolerance and total carbohydrate contents per crude (r=0.31＊) and per soluble (r=0.71＊) protein . There were also positive correlations between freezing tolerance and total sugar (r=0.67＊) and RNA content (r=0.99＊＊). No relationships of dry matter. fat. total carbohydrate and DNA contents were observed to the freezing tolerance. 4. Such sugars as raffinose. lactose, sucrose, glucose, fructose. arabinose. xylose. ribose (assumed) and rhamnose were detected in winter mulberry branch. Major sugars such as sucrose, glucose, and fructose were supposed to have higher relationship to the freezing tolerance than the other sugars. 5. Late harvesting increased RNA content except in the case of total leaf picking at mid-September. Leaf picking decreased RNA content. Some amount of RNA was, however, maintained by leaving several leaves after topping Leaving upper-middle leaves of a branch showed high RNA content. Leaving young leaves at the top and the overmatured leaves at the base showed low content. A positive correlation (r=0.51＊) was noted between RNA content and freezing tolerance in the different harvesting methods.s.

• Korean Journal of Food Science and Technology
• /
• v.53 no.6
• /
• pp.749-755
• /
• 2021

The objective of this study was to investigate the physicochemical properties of rice starch extracted from stale rice using alkaline steeping (AKL) and improved enzymatic digestion (iENZ) methods. The crude protein content (0.5-0.7%) of stale rice starch (SRS) was less than 1% by iENZ, but not so when measured by the existing ENZ methods. SRS is an intermediate amylose rice starch. AKL-SRS and iENZ-SRS exhibited typical A-type crystal packing arrangements with similar relative crystallinities. iENZ-SRS showed higher gelatinization onset and peak temperatures with a narrower gelatinization temperature range, compared to those of AKL-SRS, indicating that iENZ annealed SRS. Thus, iENZ-SRS exhibited lower swelling power and solubility, and higher pasting viscosities with delayed viscosity development. Overall, the use of stale rice as a rice starch source could make economical production of rice starch possible, and iENZ may diversify rice starch characteristics, which expands the utilization of rice starch in food and non-food industries.

• Journal of Korea Water Resources Association
• /
• v.54 no.spc1
• /
• pp.1143-1154
• /
• 2021

The selection of activation function has a great influence on the groundwater level prediction performance of artificial neural network (ANN) model. In this study, five activation functions were applied to ANN model for two groundwater level observation wells in the middle mountainous area of the Pyoseon watershed in Jeju Island. The results of the prediction of the groundwater level were compared and analyzed, and the optimal activation function was derived. In addition, the results of LSTM model, which is a widely used recurrent neural network model, were compared and analyzed with the results of the ANN models with each activation function. As a result, ELU and Leaky ReLU functions were derived as the optimal activation functions for the prediction of the groundwater level for observation well with relatively large fluctuations in groundwater level and for observation well with relatively small fluctuations, respectively. On the other hand, sigmoid function had the lowest predictive performance among the five activation functions for training period, and produced inappropriate results in peak and lowest groundwater level prediction. The ANN-ELU and ANN-Leaky ReLU models showed groundwater level prediction performance comparable to that of the LSTM model, and thus had sufficient potential for application. The methods and results of this study can be usefully used in other studies.