• 보존과학회지
• /
• 제9권1호
• /
• pp.1-10
• /
• 2000

1993 년, 충북 청주시 사뇌사지에서 많은 양의 청동 유물이 발견되었다. 이중 12점에서 시료를 채취하였고 원자 흡수 분광법 및 유도 결합 플라스마 방출 분광법을 이용하여 성분분석을 실시하였다. 또한 금속현미경 및 주사전자현미경을 이용하여 금속의 미세조직을 관찰하였다. 사뇌사지 출토 청동기는 성분, 제작 방법 그리고 용도에 따라 주조품, 단조 품, 타명기 그리고 땜 등 4 가지 종류로 분류되었다. 의례 용기로 사용된 주조품은 70% Cu, 10% Sn 그리고 20% Pb의 합금으로 ${\alpha}+{\beta}$의 전형적인 주조 조직을 보이고 있다. ${\delta}$상은 적은 양의 Sn 때문에 쉽게 관찰되지 않고 있으며 상대적으로 많은 양의 납을 함유하고 있어서 납편석을 관찰할 수 있다. 생활 용기로 사용된 단조품은 80% Cu와 20% Sn 합금으로 ${\alpha}$상과 담금질 조직을 보이고 있어 열처리를 행한 것으로 추측된다. 가공방법은 ${\alpha}$상의 모습과 ${\alpha}$상 내에 존재하는 쌍정으로 확인할 수 있다. 납은 가공을 어렵게 하므로 합금되지 않았다. 소리를 내기 위한 타명기는 85% Cu, 10% Sn, 5% Pb 또는 90% Cu, 10% Sn으로 합금되었으며 많은 양의 주석을 함유된 상태로 주조되어 수지상 구조를 나타내고 있다. 땜은 83% Cu, 12% Sn 그리고 5% Pb로 합금되었으며 공기중에서 빠르게 냉각되어 미세한 수지상 구조를 보이고 있다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1999년도 춘계학술발표회 초록집
• /
• pp.124-125
• /
• 1999

• 한국재료학회지
• /
• 제10권6호
• /
• pp.392-397
• /
• 2000

Fe-30Ni-0.35C 합금과 몇가지 저융점 순금속의 상변태에 미치는 압력의 영향에 대하여 PDSC를 이용하여 조사하였다. Fe-30Ni-0.35C 합금의 오스폼트 마르텐사이트 및 마르폼드 마르텐사이트 오스테나이트로 역변태시 압력이 1 기압에서 60기압으로 증가하에 따라. $A_s$점이 약 $2~4^{\circ}C$ 저하하며, 이것은 상전이시의 체적변화가 음의 값이 되기 때문이다. 또한 $A_f$ 점은 압력이 증가함에 따라 변함없이 일정하거나 매우 미소한 상승을 나타내는데, 이것은 압력이 증가할수록 탄화물의 석출이 촉진되기 때문이다. Fe-30Ni-0.35C 합금의 오스폼드 마르텐사이트의 역변태시 엔탈피변화는 압력이 1 기압에서 60기압으로 상승함에 따라 10~14J/g 증가한다. 순금속 Se, Sn, Pb, Zn, Te 등의 용융점은 압력이 1기압에서 60기압으로 증가함에 따라 매우 완만하게 상승하며, 용융시의 엔탈피변화는 압력의 증가에 따라 거의 변화가 없거나 미소 증가를 나타낸다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권4호
• /
• pp.5-8
• /
• 2016

We report on the fabrication and measurement results of the electrical transport properties of superconductor-normal metal-superconductor (SNS) weak links, made of PbIn superconductor and Au metal. The maximum supercurrent reaches up to ${\sim}6{\mu}A$ at T = 2.3 K and the supercurrent persists even at T = 4.7 K. Magnetic field dependence of the critical current is consistent with a theoretical fit using the narrow junction model. The superconducting quantum interference device (SQUID) was also fabricated using two PbIn-Au-PbIn junctions connected in parallel. Under perpendicular magnetic field, we clearly observed periodic oscillations of dV/dI with a period of magnetic flux quantum threading into the supercurrent loop of the SQUID. Our fabrication methods would provide an easy and simple way to explore the superconducting proximity effects without ultra-low-temperature cryostats.

• 한국재료학회지
• /
• 제32권3호
• /
• pp.146-152
• /
• 2022

One disadvantage of deep cycle flooded lead-acid batteries is increasing water loss caused by use of (+) Pb-Sb / (-) Pb-Sb alloy grid. Water loss is generated by the emission of hydrogen gas from the (-) electrode during battery charging. In this paper, we maintain cycle life aspect through the development of hybrid flooded lead-acid batteries to which a (+) Pb-Sb / (-) Pb-Ca grid is applied and deal with the improvement of water loss. The amount of water loss compared to that of the (-) Pb-Sb grid decreased when Ca was added to the (-) Pb grid. For the (-) Pb-Ca grid, it was confirmed that the time to reach 0.0 V, at which water decomposition occurs, was increased compared to that of the (-) Pb-Sb grid at the NPV (Negative Potential Voltage). In the cycle life test conducted with the BCI (Battery Council International) standard, compared to the (+) Pb-Ca grid, the (+) Pb-Sb grid increased the life cycle of the batteries and the (+) Pb-Ca grid showed an early end of life due to PbO corrosion layer generation, as determined through SEM / EDS and Tear Down analysis. In conclusion, by addition of Sb to (+) Pb grid and Ca to (-) Pb grid, we developed a hybrid flooded lead-acid battery that meets user requirements to improve water loss characteristics and preserve cycle life characteristics.

• Tribology and Lubricants
• /
• 제9권2호
• /
• pp.56-62
• /
• 1993

Al-Pb-Cu and Al-Si-Pb-Cu bearing alloys were produced by forced-stirring method and water-cooled copper mold casting to investigate the effect of the precipitation hardening on the wear properties. Sliding of produced alloy pin against a steel disc were performed under various applied loads. Lowering the wear rate and material transfer phenomena were explained by the strengthening of $\theta'$ precipitates on AI matrix. The transmission electron microscope observation reveals the role of the precipitates in the alloys with Cu. The movement of dislocations was hindered by precipitates which resulted in the reduction of plastic deformation at the worn surfaces.

• Journal of Advanced Marine Engineering and Technology
• /
• 제19권2호
• /
• pp.27-35
• /
• 1995

액체 상태인 Pb-Sn 합금에 의한 이중확산유동에 대해 체비세프 콜로케이션 기법을 이용하여 수치해석하였다. 온도차에 의한 부력과 농도차에 의한 부력이 작을때에는 유동형태가 서서히 준정상상태에 이르러 아무런 진동현상을 볼 수 없다. 부력이 증가함에 따라 유동은 수직 농도 경계층을 파괴하여 플륨(Plume)형태의 유동을 생성시키고, 이는 시스템 내부로 성장한 후 소멸된다. 이러한 현상이 반복되면서 높은 주파수의 진동현상을 관찰할 수 있다.

• 한국재료학회지
• /
• 제12권1호
• /
• pp.68-74
• /
• 2002

The lead has to be removed for the recycling of copper alloy. The lead cannot be removed from the copper alloy by oxidation. It can be removed by the evaporation because of its high vapor pressure. However, rare information is found on removal of lead from copper alloy. The purpose of present work is to provide a fundamental knowledges on the removal of lead from the copper alloy by evaporation. Gas injection was made in molten copper alloy, and the evaporation rate of lead was measured. The influence of Ar gas flow rata(2~4 L/min), initial contents of lead(2~4wt%Pb), temperature(1200~140$0^{\circ}C$) was investigated based on the thermodynamic and the kinetics. The rate constant is increased with increasing flow rate of Ar and temperature. Though amount of lead removed is increased with higher initial lead concentration, the rate constant is not changed significantly. The activation energy is estimated from the temperature dependence of the rate constant. Also removal of lead from the copper by adding chloride was made for the comparison.

• 한국주조공학회지
• /
• 제10권4호
• /
• pp.316-323
• /
• 1990

To improve free-cutting property, fine Pb, Bi particles is necessary to be distributed evenly in Al-Cu alloy. The control of added element size and distribution are very difficult because of the insolubility and gravity segregation of Pb, Bi in the matrix. Therefore, in this study, mechanical stirring of the melt, inert gasbubbling, the addition of degasser are used for the fine distribution of Pb, Bi particles. The best distribution are obtained by stirring with 500 rpm for 10min., Ar gas bubbling with 600cc/min for 5min. and degassing with 0.8wt% degasser. As increasing cooling rate, fine grain size and finely dispersed particles were observed. The optimum pouring temperature was $650^{\circ}C$.

• 한국재료학회지
• /
• 제17권1호
• /
• pp.43-49
• /
• 2007

Electrochemical migration phenomenon is correlated with ionization of anode electrode, and ionization of anode metal has similar mechanism with corrosion phenomenon. In this work, in-situ water drop test and evaluation of corrosion characteristics for SnPb solder alloys in $Na_2SO_4$ solutions were carried out to understand the fundamental electrochemical migration characteristics and to correlate each other. It was revealed that electrochemical migration behavior of SnPb solder alloys was closely related to the corrosion characteristics, and Sn Ivas primarily ionized in ${SO_4}{^2-}$ solutions. The quality of passive film formed at film surface seems to be critical not only for corrosion resistance but also for electrochemical migration resistance of solder alloys.