• 한국환경과학회지
• /
• 제12권2호
• /
• pp.227-236
• /
• 2003

Electrokinetic remediation technique offers the opportunity to extract heavy metals from soils with high plasticity. The experiment demonstrated the applicability of electrokinetic remediation on metal-mining deposit and the decision of the enhancement method for four kinds of bench-scale studies. According to the sequential extraction of heavy metals in the "I" mining deposit, Pb and Cu were mostly associated with residual fraction and Zn and Cd were associated with water soluble and residual fraction. Therefore, removable fractions by electrokinetic technology was determined by the sum of the fraction of water soluble and exchangeable, which is Cu : 19.53%, Pb : 1.42%, Cd : 52.82%, Zn : 57.28%, respectively. When considering electrical potential, volume of effluent, soil pH, and eliminated rate of contaminant, results determined by sum of each weight were Citric aic+SDS (13) > 0.1N $HNO_3$ (10) > HAc (8) > DDW (4). Therefore, citric acid and SDS mixed solution was determined the best enhancing agent for the remediation of metal mining deposit.g deposit.

• Advances in environmental research
• /
• 제5권2호
• /
• pp.79-94
• /
• 2016

In order to evaluate the contamination and health risk, levels of six hazardous elements i.e., Cr, Ni, Cu, As, Cd and Pb in soils of 12 different land-uses were measured. The average concentration of Cu, Cr, Ni, Pb, As and Cd in soils were 267, 239, 206, 195, 58 and 16 mg/kg, respectively. Levels of each metal exceeded the environmental action level for soils, which could pose significant risk to human. The metal concentrations were subsequently used to establish hazard indices (for adults and children) where the 5th and 95th percentile values were used to derive the hazard index through different exposure pathways (ingestion, dermal contact and inhalation). Considering the total exposure through each of the three pathways, the hazard index elucidates that there was a potency of non-cancer risk at most of the sites for both the adults and children. The findings of this study suggested that different land-use soils were severely contaminated with hazardous elements and attention is needed on the potential health risks to the exposed inhabitants.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.131-134
• /
• 2001

In this paper, the piezoelectric and dielectric properties as a function of x and a in $aPbZr_xTi_{1-x}O_3-(1-a)Pb(Mn_{1/3}Nb_{2/3})O_3$ + ywt%MgO is investigated. As a results, when a is 0.95 and x is 0.505, electromechanical coupling factor$(k_p)$, permittivity${\varepsilon}_33^T/{\varepsilon}_0$, piezoelectric strain constant$(d_{33})$ and mechanical quality factor$(Q_m)$ are 58 %, 1520, 272 pC/N and 1550, respectively. From XRD analysis, when x is 0.505, it is MPB which present rhombohedral and tetragonal phase in same quantity. Also, From SEM observation, when sintering temperature is $1150^{\circ}C$, grain size is about $2\;{\mu}m$. As a results added MgO dopant in the ternary piezoelectric ceramic, when MgO content is 0.1 wt%, $k_p$ increases to 63[%].

• Nuclear Engineering and Technology
• /
• 제56권9호
• /
• pp.3796-3803
• /
• 2024

By employing the melt-quenching technique, the ZnO-SrO-B₂O₃-PbO (ZSBP) glasses have been successfully fabricated. The derivative of Absorption Spectra Fitting (DASF) method was used to study the energy band gap (E_g) of the glasses which decreases from 3.57 eV to 3.39 eV. The structural properties have been studied using the Raman spectroscopy. The glass transition temperature (T_g) decreases with increase in concentration of the lead oxide. The current study examines the radiation shielding properties at 30.80-444 keV. The addition of PbO to the glasses resulted in a proportionate increase in the mass attenuation coefficient (MAC), suggesting a diminishing tendency in radiation transmission. At 30.80 keV, the MAC values are extremely high and range from 18.06 to 21.11 cm²/g. As density rises, the half value layer (HVL) decreases. In addition, the average HVL (${\overline{HVL}}$) decreases. The glass thickness required to reduce the radiation intensity to 90 %, 50 %, 25 %, and 10 % of its initial value is investigated at an energy of 35.80 keV. The T90 %, T50 %, T25 %, and T10 % values are 0.0020, 0.0132, 0.0264, and 0.0439 cm, respectively. The results suggest that a greater thickness of the radiation barrier is necessary to attain the necessary degree of attenuation.

• Bulletin of the Korean Chemical Society
• /
• 제26권10호
• /
• pp.1529-1532
• /
• 2005

A simple and cost effective method for separation and preconcentration of Ag(I) at the $10^{-7}\;mol\;L^{-1}$ level in the environmental and mineral samples is present. The method is based on the flotation of Ag(I)-iodide complex as an ion-associate with ferroin in pH of 4 from a large volume of an aqueous solution (500 mL) using nheptane. The floated layer was then dissolved in dimethylsulfoxide (DMSO) for the subsequent spectrophotometric determination. Beer's law was obeyed over a range of 2.0 ${\times}$ $10^{-7}$-4.0 ${\times}$ $10^{-6}$ mol $L^{-1}$ with the apparent molar absorptivity of 2.67 ${\times}$ $10^5$ L $mol^{-1}\;cm^{-1}$. The detection limit (n = 5) was 4 ${\times}$ $10^{-8}$ mol $L^{-1}$, and RSD (n = 5) obtained for 2.0 ${\times}$ $10^{-6}$ mol $L^{-1}$ of Ag(I) was 2.2%. The interference effects of a number of elements was studied and found that only $Hg^{2+}$ at low concentration, and $Pb^{2+}$, $Cd^{2+}$, $Cu^{2+}$, and $Fe^{3+}$ ions at moderately high concentrations were interfered. To overcome on these interference effects, the solution was treated with EDTA at a buffering pH of 4 and passed through a column containing Amberlite IR-120 ionexchanger resin, just before the flotation process. The proposed method was applied to determine of Ag(I) in a synthetic waste water, a photographic washing sample and a geological sample and the results was compared with those obtained from the flame atomic absorption spectrometry. The results were satisfactorily comparable with together, so that the applicability of the proposed method was confirmed in encountering with the real samples.

• 동아시아식생활학회지
• /
• 제11권4호
• /
• pp.289-294
• /
• 2001

서해안에서 수집한 모시조개, 바지락. 맛조개. 꼬막, 소라 및 굴 등 6종의 조개류의 껍질수율과 외관, 껍질 및 열수 추출물의 무기질 및 중금속 함량을 조사하였다. 조개류 껍질의 비율은 70.1~80.5% 범위였으나 맛조개는 40.7%로 낮았다. 개체당의 껍질무게는 소라가 26.2 g으로 가장 높았고 맛조개가 5.6 g으로 가장 낮았다. 모시조개껍질은 노랑색을 띈 갈색, 바지락은 밝은 갈색. 맛조개와 꼬막은 검은색이었고 소라는 녹색을 띄는 갈색을, 굴은 어두운 회색을 띄었다. 조개류의 주 무기질은 Ca로 36.23~38.78%였으며, K는 0.23~4.54%, Na는 1.48~l.59%였다. 그외 Na, Mg, Fe, Mn, Zn, Cu, P, S 등은 0.0l~0.21% 범위로 함유되어 있었다. 중금속으로 Pb는 1.90~7.75 ppm, Cd는 0.5~4.50 ppm, As는 1.40~4.30 ppm, Se는 0.2~l.50 ppm Cr은 1.00~8.30 ppm, Hg는 0.002~8.2ppm이었다. 조개류 껍질로부터 물에 의하여 추출되는 Ca의 함량은 l15~2.448 mg/100g으로 맛조개가 가장 높았으며 바지락이 가장 낮았다. 물에 의하여 추출되는 K는 10~952 mg/100 g으로 모시조개가 가장 낮았고, 맛조개가 가장 높았다. 조개껍질의 무기질 추출율은 맛조개에서 전반적으로 높았으며 종류에 따라서 상당한 차이를 나타내었다. 특히. P는 맛조개가 201 mg/100 g으로 바지락 0.36 mg/100g에 비하여 현저히 높았다. Pb. As, Se 및 Cr의 물추출량은 맛조개에서 가장 높았으며 각각 110. 40, 90 및 20 $\mu$g/100 g이었다. 그러나 Cd는 바지락껍질에서만 검출되었다.

• 한국환경보건학회지
• /
• 제28권2호
• /
• pp.23-39
• /
• 2002

This study focuses on the structure of geographical conditions, the riverbed, the meterological and atmospheric examination, the ecological environment, the food chain and the ecosystem, in order to establish a basic plan for preparing a natural learning area of environmental ecosystem in Bukchun and its surroundings, Gyeongju. The results could be summarized as follows. Bukchun is a first grade which extends 6km along the road from Bomun bridge to the junction of Hyungsangang. The basin area is 7.10$\textrm{km}^2$ and the slope is 1/200~1/300. Gyeongju has good atmospheric conditions, i.e. SO$_2$0.011 ~0.017ppm, CO 0.8~ 1.5ppm, NO$_2$0.013~0.019ppm, $O_3$0.013~0.020ppm, TSP 85~142$\mu\textrm{g}$/㎥, PM-10 47~90$\mu\textrm{g}$/㎥ and Pb 0.057 ~0.129$\mu\textrm{g}$/㎥, which is below the annual and daily averages, and is little lower than those of Pohang and Ulsan. The ecosystem of Bukchun is based on the structure of the food chain, which includes birds such as the grey and white herons at the top of the food chain. This study also considers the development of the river's in terms of culture, environment and ecology concept.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1244-1245
• /
• 2008

Recently, piezoelectric transformer is applied to wide fields. Multi layer piezoelectric transformer has the advantage of high step up ratio, electromechanical coupling coefficient(Kp) and mechanical quality factor(Qm), but is indicated of peeling-phenomenon of electrode, rising sintering temperature made price of costly electrode. So in this study, it discuss on method for fabrication of rosen type piezoelectric transformers. For the fabrication as rosen type piezoelectric transformers, synthesized the powder using 0.01Pb$(ni_{1/3}Nb_{2/3})O_3$ - 0.08Pb$(Mn_{1/3}Nb_{2/3})O_3$ - 0.91Pb$(Zr_{0506}Ti_{0496})O_3$ (abbreviated as PNN-PMN-PZT) ceramics. The density, microstructure, dielectric and piezoelectric properties as a function of sintering temperature were investigated. The results indicated that the optimized properties of ceramics were obtained at sintering temperature of 1200$^{\circ}C$, showed the value of $d_{33}$=273pC/N, $K_p$=0.60 $Q_m$=1585, ${\varepsilon}_r$=1454, density=7.917$g/cm^3$ and $tan{\delta}$=0.0064.

• 한국전기전자재료학회논문지
• /
• 제33권6호
• /
• pp.465-470
• /
• 2020

Heterolayered K(Ta,Nb)O₃/Pb(Zr,Ti)O₃ thin films on Pt/Ti/SiO₂/Si substrates were prepared by a sol-gel process and spin-coating method. The structural and electrical properties were measured to investigate the possibility of application as an electrocaloric effect device. All specimens exhibited dense and uniform cross-sectional structures without pores, and the average thickness of the specimen coated six times was approximately 394 nm. Curie temperatures were observed at 5℃ or less in type-I and 10℃ in type-II specimens, respectively. Type-II specimens coated 6 times showed a relative dielectric constant of 758 and remanent polarization of 9.71 μC/㎠ at room temperature. The maximum electrocaloric effect occurred between 20 and 25℃, slightly higher than their Curie temperature, and the electrocaloric property (ΔT) of the type-II specimens coated 6 times was approximately 1.2℃ at room temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.392-395
• /
• 2003

For the purpose of digital x-ray imaging, many materials such as $PbI_2$, $HgI_2$, TlBr, CdTe and CdZnTe have been under development for servaral years as direct converter layer. $Hgl_2$ film detector have recently been shown as one of the most promising semiconductor materials to be used as direct converters in x-ray digital radiography. This paper, the $HgI_2$ films are deposited on conductive-coated glass by screen printing, in which $HgI_2$ powder is embedded in a binder and solvent, and the slurry is used to coat the conductive-coated glass. We investigated electrical characteristic of the fabricated $HgI_2$ films. The x-ray response to radiological x-ray generator of 70Kvp using the current integration mode will be reported for screen printing films. These results indicate that $HgI_2$ detectors have high potential as new digital x-ray imaging devices for radiography.