• Economic and Environmental Geology
• /
• v.39 no.1 s.176
• /
• pp.63-74
• /
• 2006

In order to identify the Pb pollution and its sources in continental shelf and slope areas, Pb concentration and Pb isotope ratios ($^{207}Pb/^{206}Pb\;and\;^{208}Pb/^{206}Pb$) were determined far 6 box corer sediments collected from the southern East/japan Sea. Pb concentration, and $^{207}Pb/^{206}Pb\;and\;^{208}Pb/^{206}Pb$ ratios were constant at around $25\pm5 ppm$ and 0.842 and 2.092 from 1700 to 1930 year, respectively and increased steadily up to $40\pm5 ppm$ and 0.867 and 2.123 at the beginning of 1990s', respectively. The increase of concentration and isotope ratios in the labile fraction (leached by 2M HC1+0.5M $HNO_3$) explains their increase in bulk sediments, while Pb concentration and isotope ratios in the residual fraction were nearly constant during 300yrs. Temporal variation of Pb isotope ratios was explained by simple two end-members mixing of geo-genic and anthropogenic sources because isotope ratios and the inverse of Pb concentration showed the good linear relationships. Using Pb isotope ratios, we can constrain two Pb sources in the study area. The one is atmospheric particulates, compared with mean values of isotope ratios in atmospheric particulates collected at Jeju and Oki ;stands, based on the history of Pb emmission in Korea and China, and judged by oceanographic processes capable of homogenizing many sources. The other is local sources related to iron mills, refineries of Pb ore and of petroleum located at the coast of the study area. Isotope ratios of anthropogenic Pb can be estimated using two end-members mixing equation and were $0.879\pm0.005\;and\;2.144\pm0.008$ before 1950s' while they increased up to $0.900\pm0.008\;and\;2.162\pm0.011$ after 1980s', respectively.

• Mass Spectrometry Letters
• /
• v.4 no.4
• /
• pp.87-90
• /
• 2013

Isotope amount ratios of lead in a bronze sample have been successfully determined using multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS). Matrix separation conditions were tested and optimized using ion exchange chromatography with anion-exchange resin, AG1-X8, and sequential elution of the 0.5 M HBr and 7 M $HNO_3$ to separate lead from very high contents of copper and tin in bronze matrix. Mercury was also removed efficiently in the optimized separation condition. The instrumental isotope fractionation of lead in the MC-ICP-MS measurement was corrected by the external standard sample bracketing method using an external standard, NIST SRM 981 lead common isotope ratio standard followed by correction of procedure blank to obtain reliable isotope ratios of lead. The isotope ratios, $^{206}Pb/^{204}Pb$, $^{207}Pb/^{204}Pb$, $^{208}Pb/^{204}Pb$, and $^{208}Pb/^{206}Pb$, of lead were determined as $18.0802{\pm}0.0114$, $15.5799{\pm}0.0099$, $38.0853{\pm}0.0241$, and $2.1065{\pm}0.0004$, respectively, and the determined isotope ratios showed good agreement with the reference values of an international comparison for the same sample within the stated uncertainties

• The Journal of the Petrological Society of Korea
• /
• v.10 no.3
• /
• pp.157-171
• /
• 2001

This study investigated the effects of Pb/Tl ratio, Pb concentration and concomitant matrix elements on the measurement of Pb isotope ratios using multi-collector ICP/MS (AXIOM MC model). Accuracy and reproducibility of Pb isotope ratios in NBS 981 solution were estimated for 42 data measured from March to August 2001. Pb isotopes measured in rocks, bronzes and sediments were compared to data measured by TIMS. Reproducibilities for $^{206}Pb/^{204}Pb,\; ^{207}Pb/^{204}Pb,\;and\;^{208}Pb/^{204}Pb$ ratio were about 500 ppm (2sd) and for $^{207}Pb/^{206}Pb$\;and\;^{208}Pb/^{206}Pb$ were 100~200 ppm for 200 ng of Pb in NBS 981 solution. The optimum conditions for the analysis of Pb isotope ratios with AXIOM MC for best accuracy and reproducibility were defined as follows; 1) Pb/Tl ratio is about 10 2) Pb concentration is about 100 ng/ml 3) correction for mass discrimination is performed by exponential law using 2.3887 of $^{205}Tl/^{203}Tl$ and Pb mass fractionation factor empirically obtained from $ln(^{208}Pb/^{206}Pb)-ln(^{205}Tl/^{203}Tl)$ relationship. The sample data measured with MC/ICP/MS for acid-digested and chemically separated rock samples, and acid-digested bronze samples and sediment samples coincide with those of TIMS within analytical errors. Therefore, MC/ICP/MS is a rapid analytical technique for Pb isotope ratios with the similar precision compared with TIMS.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.3
• /
• pp.174-182
• /
• 2011

The present study evaluated the major lead sources in a steel metallurgy industrialized city by measuring lead isotopes/lead concentrations of ambient air and potential sources in an industrial area and residential areas according to relative distance. The quality control program obtained during the measurement procedure for lead isotopes and concentrations exhibited $0.5ng/m^3$ for method detection limit, more than 90% for recoveries of standard particulate matters, and lower than 0.2% for reproducibility errors of four lead isotopes ($^{204}Pb$, $^{206}Pb$, $^{207}Pb$, $^{208}Pb$). For all three lead isotope ratios ($^{206}Pb/^{204}Pb$, $^{207}Pb/^{206}Pb$, $^{208}Pb/^{206}Pb$), the ratios were obtained in the industrial area were closer to nearby residential area than those of a residential area far away from the industrial area, thereby suggesting that lead sources were more similar each other in the industrial and nearby residential area. Furthermore, for both summer and winter seasons ambient lead concentrations were more than four times higher in the industrial area than in the residential areas and in turn, they were higher in the nearby residential area compared with the far-away residential area. As a result, it was suggested that lead emitted from the industrial area would influence more the ambient lead in the nearby residential area than the far-away residential area. Both slag and traffic emissions are likely to be major lead sources in the industrial and nearby residential areas, since their three lead isotope ratios ($^{206}Pb/^{204}Pb$, $^{207}Pb/^{206}Pb$, $^{208}Pb/^{206}Pb$) were similar to the ratios obtained from ambient air of these two areas. In addition, the lead isotope ratios revealed different pattern between seasons, and the ambient lead concentrations were higher for winter than for summer.

• Economic and Environmental Geology
• /
• v.29 no.1
• /
• pp.35-43
• /
• 1996

Sr-Nd-Pb isotopic results are reported for the Ogcheon amphibolites from the central part of the Ogcheon Belt. Rb-Sr and Pb-Pb whole rock isotope data plot greatly scattered in the isochron diagrams due to later alteration or metamorphism, whereas the Sm-Nd whole rock isotope data define a linear array with an age of $1270{\pm}220$ Ma ($1{\sigma}$). Considering several geochemical features of the amphibolites, the 1270 Ma linear array may be not a true but an apparent mixing isochron due to source heterogeneity.

• The Journal of the Petrological Society of Korea
• /
• v.5 no.1
• /
• pp.84-88
• /
• 1996

Pb isotope composition is analyzed from the rock chips of marbles intercalated between gneisses of Muju area and it shows very large variation ($^{206}Pb/^{204}Pb$=23.74~4142, $^{207}Pb/^{204}Pb$=16.32~18.43, $^{208}Pb/^{204}Pb$=36.42~39.75). The data points form well defined positive relationship on $^{206}Pb/^{204}Pb$ vs $^{207}Pb/^{204}Pb$ plot, which corresponds to $1.99{\pm}0.10$($2{\sigma}$) Ga. This age is very similar to the formation ages of the granitic gneisses from Buncheon and Cheondongri (Tanyang), and suggests that the fairly large volume of Sobaeksan Massif suffered regional metamorphism at this time. It is suggested that the most parts of Korean peninsula including Kyeonggi and Sobaeksan Massifs were very close each other and experienced a regional metamorphism together about 2.0 Ga ago from the fact that galenas from whole Korean Peninsula except Kyeongsang Basin and metamorphic rocks from Kyeonggi Massif also reveal a similar slope corresponding 2.0 Ga on Pb-Pb isotope plot.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.2
• /
• pp.187-193
• /
• 2015

The purpose of the present study is to trace the provenance of lead raw materials using the lead isotope ratio of 9 lead glasses excavated from the Sarira hole of Mireuksaji stone pagoda and to determine correlation between them and other lead glasses excavated from the Wanggungri site. The results of chemical analysis of the 9 lead glasses show that they are common lead glass system($PbO-SiO_2$) with respect to the contents of PbO (70 wt.%) and $SiO_2$ (30 wt.%). The lead isotope ratios of them plot to northern Korean peninsula when applied to the distribution map of lead isotopes of East Asia. On the other hand, southern Korean peninsula is verified as the main deposits of the lead ore in the distribution map of lead isotopes of South Korea. With respect to the results, it is notable that the provenance of the 9 lead glasses can be very different depending on the distribution map. In addition, a comparative study between them and the lead glasses excavated from the Wanggungri which was built in the same region and period shows that their lead isotopes are highly correlated.

• Journal of Conservation Science
• /
• v.30 no.4
• /
• pp.345-351
• /
• 2014

Chemical and Pb isotope analysis were performed in order to determine the origin of bronze artefacts excavated from the Inyongsaji site in South Korea. The result of ICP-MS shows that they are tin bronzes in which lead was not intentionally added during production. Pb isotope data analyzed by TIMS are plotted in the southern region of Korea and China of the distribution map drawn by Mabuchi(1985). On the other hand, the identical isotope data are plotted in the Taebaek basin and the Olcheon metamorphic belt correspondent to zone2 and zone3 respectively. It is believed that the isotope data on the tin bronzes which have very low lead content can be used to trace the origin of copper ore rather than those of either lead or tin ore. Pb istope analysis allows diverse interpretation as it can be applied to any object containing trace amounts of lead. In addition, accumulation of isotope data as well as further studies will improve reliability of the provenance studies.

• Journal of the korean society of oceanography
• /
• v.35 no.4
• /
• pp.179-191
• /
• 2000

Both acid-leached and residual Pb in surface sediments of the Yellow Sea are analyzed in order to explain the spatial distribution of Pb contents and to determine a major controlling factor of its geographical distribution. Leached and residual Pb contents in surface sediments, which may have a different origin, show mirrored geographical distribution. Sediments with high residual Pb ( ${\sim}$20 ${\mu}$g/g; northeastern sand) contain low leached Pb (6-8 ${\mu}$g/g) while sediments with high leached Pb ( ${\sim}$20 ${\mu}$g/g; central mud) contain low residual Pb. As a result, total Pb shows little variation spatially. The mirrored distribution of both species also leads the grain-size dependence of Pb contents to be unclear although the grain-size dependence of other trace metals (Cr, Co, Ni etc.) has been well reported in this shelf. High leached Pb contents (>15 ${\mu}$g/g) were also observed in sediments off the Changjiang River mouth and off the Kyunggi Bay where they can be interpreted as the results of diagenetic accumulation and anthropogenic pollution, respectively. Residual Pb enriched in sands of the northeastern area might be from K-feldspar, which in turn allows the suggestion that northeastern sands may have originated from coastal erosion of granitic landmass or directly from nearby rivers.

• Korean Journal of Metals and Materials
• /
• v.50 no.11
• /
• pp.829-838
• /
• 2012

The microstructure, chemical composition, and lead isotope ratio of the Buddhist bell of Yongmoon Mountain Sangwonsa temple, which was selected as one of the three great bells of Korea by Japanese historians, were analyzed in order to estimate the origin of the material and the time of casting. The microstructure of the temple bell was composed of a copper matrix phase with ${\alpha}$, a face centered cubit lattice structure, a ${\delta}$ phase with $Cu_{41}$ $(Sn,Ag,Sb)_{11}$ as the chemical structural formula, dispersed lead and $Cu_2S$ particles, and locally agglomerated fine particles. Through analysis of the chemical composition of the bell, a criterion (Pb: 0-3.0 wt%, Sn: 10-15 wt%) for distinguishing the bells of the Shilla dynasty from the bells of the Koryo Chosun dynasty is proposed. Examining the lead isotope ratio of $^{207}Pb/^{206}Pb$ and $^{208}Pb/^{206}Pb$ of the Buddhist bell of Sangwonsa temple proved that the bell was fabricated using raw materials in South Korea, which led to the conclusion that the bell was cast in Korea and the top board of the bell has been damaged by an unknown individual. The criteria of distinguishing the bells from the Shilla dynasty from the bells of the Koryo Chosun dynasty presented for the first time in this research is expected to aid in identifying and estimating the previously unclear production years of other bells.