• 대한전자공학회논문지SD
• /
• 제44권4호
• /
• pp.91-96
• /
• 2007

사파이어 기반의 GaN LED의 광추출 효율을 시뮬레이션을 이용하여 정량적으로 평가하였다. 각각의 LED는 ray-tracing 시뮬레이션을 이용하여 광추출 효율을 계산하였다. 본 연구에는 PSS(patterned sapphire substrate) LED와 flat LED의 비교 분석을 통하여, LED에서의 사파이어 기판의 패턴이 광추출에 미치는 영향을 설명하였다. 또한, 각각의 칩에서 반사막의 반사도가 광추출에 미치는 영향을 분석하고, 그 원인을 시뮬레이션을 이용하여 설명하였다. 한편, 사파이어 패턴에 의한 광추출효율의 변화 효과를 공기(air)와 실리콘(silicone) 분위기에서 시뮬레이션을 수행하였다. 이러한 시뮬레이션 기술을 통해 광추출 효율의 개선 정도를 정량적으로 평가할 수 있었으며, 이러한 연구가 향후 고효율 LED 개발에 도움을 줄 것으로 판단된다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권3호
• /
• pp.199-205
• /
• 2006

Patterned sapphire substrates (PSS) were fabricated by a simple wet etching process with $SiO_2$ stripe masks and a mixed solution of $H_2SO_4$ and $H_3PO_4$. GaN layers were epitaxially grown on the PSS under the optimized 2-step growth condition of metalorganic vapor deposition. During the 1st growth step, GaN layers with triangular cross sections were grown on the selected area of the surface of the PSS, and in the 2nd growth step, the GaN layers were laterally grown and coalesced with neighboring GaN layers. The density of threading dislocations on the surface of the coalesced GaN layer was $2{\sim}4\;{\times}\;10^7\;cm^{-2}$ over the entire region. The epitaxial structure of near-UV light emitting diode (LED) was grown over the GaN layers on the PSS. The internal quantum efficiency and the extraction efficiency of the LED structure grown on the PSS were remarkably increased when compared to the conventional LED structure grown on the flat sapphire substrate. The reduction in TD density and the decrease in the number of times of total internal reflections of the light flux are mainly attributed due to high level of scattering on the PSS.

• 한국전기전자재료학회논문지
• /
• 제24권1호
• /
• pp.7-11
• /
• 2011

Sapphire substrate was patterned by a selective chemical wet etching technique, and GaN/InGaN structures were grown on this substrate by MOVPE (Metal Organic Vapor Phase Epitaxy). The surface of grown GaN on patterned sapphire substrate (PSS) has good morphology and uniformity. The patterned sapphire substrate LED showed better light output than conventional LED that improvement 50%. We think these results come from enhancement of internal quantum efficiency by decrease of threading dislocation and increase of light extraction efficiency. Also these LED showed more uniform emission distribution in angle than conventional LED.

• 한국전기전자재료학회논문지
• /
• 제28권10호
• /
• pp.676-681
• /
• 2015

Recently many studies being carried out to increase the light efficiency of LED. The external quantum efficiency of LED, generally the light efficiency, is determined by the internal quantum efficiency and the light extraction efficiency. The internal quantum efficiency of LED was already reached to more than 90%, but the light extraction efficiency is still insufficient compared with the internal quantum efficiency because the total internal reflection is generated in the interface between the LED chip and air. Thus, we studied about flip chip LED with PSS and performed the optical simulation which find more optimized PSS for flip chip LED to increase the light extraction efficiency. Decreasing of the total internal reflection and effect of diffused reflection according to PSS improved the light extraction efficiency. To get more higher the efficiency, we simulated flip chip with PSS that the parameters are arrangement, edge spacing, radius, height and shape of PSS.

• Current Optics and Photonics
• /
• 제1권4호
• /
• pp.358-363
• /
• 2017

In this study, we present a detailed investigation of luminescence properties of a blue light-emitting diode using InGaN/GaN (indium component is 17.43%) multiple quantum wells as the active region grown on patterned sapphire substrate by low-pressure metal-organic chemical vapor deposition (MOCVD). High-resolution X-ray diffraction (HRXRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), Raman scattering (RS) and photoluminescence (PL) measurements are employed to study the crystal quality, the threading dislocation density, surface morphology, residual strain existing in the active region and optical properties. We conclude that the crystalline quality and surface morphology can be greatly improved, the red-shift of peak wavelength is eliminated and the superior blue light LED can be obtained because the residual strain that existed in the active region can be relaxed when the LED is grown on patterned sapphire substrate (PSS). We discuss the mechanisms of growing on PSS to enhance the superior luminescence properties of blue light LED from the viewpoint of residual strain in the active region.

• 한국결정성장학회지
• /
• 제29권4호
• /
• pp.173-178
• /
• 2019

본 연구에서는 halide vapor phase epitaxy 성장법을 이용하여 원뿔 형태의 패턴이 주기적으로 형성된 patterned sapphire substrate(PSS) 위에 ${\alpha}-Ga_2O_3$를 성장하고 그 특성에 변화에 대해 분석하였다. PSS의 패턴의 유무에 따른 영향을 알아보기 위해 c-plane 사파이어 기판과 원뿔의 크기가 다른 두 개의 PSS 위에 ${\alpha}-Ga_2O_3$를 성장하여 비교 분석하였다. 또한 PSS 위에 성장된 ${\alpha}-Ga_2O_3$의 성장과정을 알아보기 위해 점차 성장 시간을 증가해가며 관찰하였고 성장 온도를 $470-550^{\circ}C$까지 변화해가며 성장하였다. 이를 통해 원뿔 형태의 패턴이 형성된 PSS 위에서의 최적 성장 조건과 그 성장 mechanism에 대해 분석이 가능하였고 그 결과로 성장과정에서 발생하는 수평 성장에 의해 ${\alpha}-Ga_2O_3$의 비대칭면인 (10-14) 반치폭 값을 크게 감소시킬 수 있었다.

• 한국재료학회지
• /
• 제24권12호
• /
• pp.645-651
• /
• 2014

GaN is most commonly used to make LED elements. But, due to differences of the thermal expansion coefficient and lattice mismatch with sapphire, dislocations have occurred at about $109{\sim}1010/cm^2$. Generally, a low temperature GaN buffer layer is used between the GaN layer and the sapphire substrate in order to reduce the dislocation density and improve the characteristics of the thin film, and thus to increase the efficiency of the LED. Further, patterned sapphire substrate (PSS) are applied to improve the light extraction efficiency. In this experiment, using an AlN buffer layer on PSS in place of the GaN buffer layer that is used mainly to improve the properties of the GaN film, light extraction efficiency and overall properties of the thin film are improved at the same time. The AlN buffer layer was deposited by using a sputter and the AlN buffer layer thickness was determined to be 25 nm through XRD analysis after growing the GaN film at $1070^{\circ}C$ on the AlN buffer CPSS (C-plane Patterned Sapphire Substrate, AlN buffer 25 nm, 100 nm, 200 nm, 300 nm). The GaN film layer formed by applying a 2 step epitaxial lateral overgrowth (ELOG) process, and by changing temperatures ($1020{\sim}1070^{\circ}C$) and pressures (85~300 Torr). To confirm the surface morphology, we used SEM, AFM, and optical microscopy. To analyze the properties (dislocation density and crystallinity) of a thin film, we used HR-XRD and Cathodoluminescence.

• 한국재료학회지
• /
• 제29권1호
• /
• pp.59-64
• /
• 2019

This study investigates the optical characteristics of InGaN multiple quantum wells(MQWs) light emitting diodes(LEDs) on planar sapphire substrates(PSSs), nano-sized PSS(NPSS) and micro-sized PSS(MPSS). We obtain the results as the patterning size of the sapphire substrates approach the nanometer scale: The light from the back side of the device increases and the total light extraction becomes larger than the MPSS- and planar-LEDs. The experiment is conducted by Monte Carlo ray-tracing, which is regarded as one of the most suitable ways to simulate light propagation in LEDs. The results show fine consistency between simulation and measurement of the samples with different sized patterned substrates. Notably, light from the back side becomes larger in the NPSS LEDs. We strongly propose that the increase in the light intensity of NPSS LEDs is due to an abnormal optical distribution, which indicates an increase of extraction probability through NPSS.

• 마이크로전자및패키징학회지
• /
• 제18권4호
• /
• pp.91-95
• /
• 2011

GaN 기반의 LED에서 광 추출 효율을 정량적으로 분석하였다. Ray-Tracing기반의 시뮬레이션을 이용하여 사파이어 기판에 형성된 패턴의 형태, 크기, 깊이, 간격들을 분석하여 최적의 패턴 요소들을 도출하였다. 시뮬레이션의 결과로 최적의 패턴 형태는 반구 형태에서 높은 광 추출 효율을 보였다. 일반적인 패턴이 없는 사파이어 기판을 사용한 LED의 광 추출 효율보다 반구 형태의 패턴을 가진 사파이어 기판에서 약 40% 향상된 광 추출 효율을 보였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.51-51
• /
• 2010

Group III-nitride semiconductors have been widely studied as the materials for growth of light emitting devices. Currently, GaN devices are predominantly grown in the (0001) c-plane orientation. However, in case of using polar substrate, an important physical problem of nitride semiconductors with the wurtzite crystal structure is their spontaneous electrical polarization. An alternative method of reducing polarization effects is to grow on non-polar planes or semi-polar planes. However, non-polar and semipolar GaN grown onto r-plane and m-plane sapphire, respectively, basically have numerous defects density compared with c-plane GaN. The purpose of our work is to reduce these defects in non-polar and semi-polar GaN and to fabricate high efficiency LED on non/semi-polar substrate. Non-polar and semi-polar GaN layers were grown onto patterned sapphire substrates (PSS) and nano-porous GaN/sapphire substrates, respectively. Using PSS with the hemispherical patterns, we could achieve high luminous intensity. In case of semi-polar GaN, photo-enhanced electrochemical etching (PEC) was applied to make porous GaN substrates, and semi-polar GaN was grown onto nano-porous substrates. Our results showed the improvement of device characteristics as well as micro-structural and optical properties of non-polar and semi-polar GaN. Patterning and nano-porous etching technologies will be promising for the fabrication of high efficiency non-polar and semi-polar InGaN LED on sapphire substrate.