• Journal of the Ergonomics Society of Korea
• /
• v.26 no.1
• /
• pp.79-85
• /
• 2007

Demand forecasting methods for a consumer product such as TV or refrigerator are widely known. However, sales forecast for a brand new product cannot be estimated using conventional forecasting methods. This study proposes a five-step procedure in forecasting a newly developed product. Step one defines functions in a High Touch product in order to estimate relative attraction of the product to consumer group. In step two, for a comparison purpose, a compatible product that is successfully penetrated into market is selected. Step three breaks a target population into many segments based on demography. Step four calculates relative attraction between the High Touch product and the compatible product. Finally, market penetration rate of the High Touch product is estimated using a bell-shaped diffusion curve of the compatible product. The process offers a method to estimate potential demand and growth pattern of the new High Touch product.

• International Journal of Contents
• /
• v.6 no.2
• /
• pp.1-5
• /
• 2010

The rapid growth in communication technology has led to the development of effective ways of sharing ideas and information in the form of speech and images. Understanding this information has become an important research issue and drawn the attention of many researchers. Text in a digital image contains much important information regarding the scene. Detecting and extracting this text is a difficult task and has many challenging issues. The main challenges in extracting text from natural scene images are the variation in the font size, alignment of text, font colors, illumination changes, and reflections in the images. In this paper, we propose a connected component based method to automatically detect the text region in natural images. Since text regions in mages contain mostly repetitions of vertical strokes, we try to find a pattern of closely packed vertical edges. Once the group of edges is found, the neighboring vertical edges are connected to each other. Connected regions whose geometric features lie outside of the valid specifications are considered as outliers and eliminated. The proposed method is more effective than the existing methods for slanted or curved characters. The experimental results are given for the validation of our approach.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.8
• /
• pp.1138-1144
• /
• 2002

Recently GDI(Gasoline Direct Injection) engine is spot-lighted to achieve higher thermal efficiency under partial loads and better performance at full loads. To realize this system, it is essential to make both stratified combustion and homogeneous combustion. Spray pattern must be optimized according to injection timing because ambient pressure in combustion chamber is varied with crank angle. In this experimental study, two types of visualization system such as laser scattering method and schlieren method were developed to clarity the spray behavior during on intake stroke. As the ambient pressure increases, thepenetration length and spray angle show a tendancy to decrease due to rising resistance caused by the drag force of the ambient air. Distribution of injected fuel on intake stroke has a significant effect on homogeneous mixture in the cylinder. These results provide the information on macroscopic wall-wet growth in the cylinder and design factors for developing GDI injector.

• Journal of Plant Biotechnology
• /
• v.3 no.3
• /
• pp.135-140
• /
• 2001

An Agrobacterium tumefaciens LBA4404 (harboring antisense OMT gene)-mediated transformation method has been developed for poplar (P.nigra x maximowiczii) using prolonging co-cultivation time. Explants on LT (longterm) were induced transgenic calli one month earlier than those from ST (short-term) co-cultivation and remained healthier on LT than ST. With this approach, LT method reduced time to produce transgenic calli. Shoots were successfully regenerated from transgenic calli on SIM (Shoot Induction Medium) and rooted well on the basal medium spontaneously. The presence of antisense OMT gene was verified both by PCR and Southern analysis. Each transgenic poplar was phenotypically indishtinguishable when compared with controls for their growth pattern, leaf morphologies and xylem coloration.

• Transactions of Materials Processing
• /
• v.6 no.5
• /
• pp.446-455
• /
• 1997

A Combined extrusion operation consists of forward and backward extrusion forming and it is possible to make the process be simple by employing it. But the metal flow pattern induced by the operation is hard to analyze accurately because the flows are non-steady, which have at least two directions dependent upon each other. So engineers in the industrial factories had conducted the two extrusion operations separately. A new process was designed by the industrial expert for forming of an alu-minum preform using the combined extrusion operation. In this study, experiments and finite element analysis was carried out to determine the process parameters. Through the preliminary experiment, it was shown that warm forming condition was more desirable than cold or hot ones. And optimal shape of initial billet could be also determined. From the compatibility test, bonde-lube was chosen as the optimal lubricant and 20$0^{\circ}C$ as the material temperature by the inspection of micro-structure. The operation was simulated by the rigid-plastic finite element method to examine the metal flow. Disap-pearing of dead metal zone was observed as the punch fell down and desirable shape was obtained from the one operation. As a result of this study, 7 operations could be reduced and 225% of material saved.

• The Korean Journal of Ceramics
• /
• v.6 no.3
• /
• pp.272-275
• /
• 2000

Starting from the stoichiometric composition of $K_2$CO$_3$: Li$_2$CO$_3$: Nb$_2$O$_5$=3 : 2 : 5 with the mole ratio, $K_3$LiNb$_6$O$_17$ 17/ single crystals were grown using the Czochralski method. Although the starting melt composition corresponds to the $K_3$Li$_2$Nb$_5$O$_15$ crystals, the chemical composition of the as grown crystals appears to be $K_2.95$Li$_1.33$Nb$_6.17$O$_17$ or $K_2.60$Li$_1.17$Nb$_{5.44}$ 5.44/O$_{15}$ which relatively contain fewer Li ions than $K_3$Li$_2$Nb$_5$O$_15$ crystals. We investigated the influence of the deficiency of the Li ions in the tetragonal tungsten bronze structure through the measurements of DE loop, temperature dependent dielectric constant, differential thermal analysis and temperature dependent X-ray diffraction pattern.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.2
• /
• pp.75-79
• /
• 2017

Honeycomb-shaped Ag-grid transparent conductive electrodes (TCEs) were fabricated using two different processes, high density plasma etching and lift-off, and the optical and electrical properties were compared according to the fabrication method. For the fabrication of the Ag-grid TCEs by plasma etching, etch characteristics of the Ag thin film in $10CF_4/5Ar$ inductively coupled plasma (ICP) discharges were studied. The Ag etch rate increased as the power increased at relatively low ICP source power or rf chuck power conditions, and then decreased at higher powers due to either decrease in $Ar^+$ ion energy or $Ar^+$ ion-assisted removal of the reactive F radicals. The Ag-grid TCEs fabricated by the $10CF_4/5Ar$ ICP etching process showed better grid pattern transfer efficiency without any distortion or breakage in the grid pattern and higher optical transmittance values of average 83.3 % (pixel size $30{\mu}m/line$ width $5{\mu}m$) and 71 % (pixel size $26{\mu}m/line$ width $8{\mu}m$) in the visible range of spectrum, respectively. On the other hand, the Ag-grid TCEs fabricated by the lift-off process showed lower sheet resistance values of $2.163{\Omega}/{\square}$ (pixel size $26{\mu}m/line$ width $18{\mu}m$) and $4.932{\Omega}/{\square}$ (pixel size $30{\mu}m/line$ width $5{\mu}m$), respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.4
• /
• pp.158-163
• /
• 2011

$CuInS_2$ thin films were prepared using a sol-gel spin-coating method. That makes large scale substrate coating, simple equipment, easy composition control available. The structural and optical properties of $CuInS_2$ thin films that include less toxic materials (S) instead of Se, tetragonal chalcopyrite structure. Copper acetate monohydrate ($Cu(CH_3COO)_2{\cdot}H2O$) and indium acetate ($In(CH_3COO)_3$) were dissolved into 2-propanol and l-propanol, respectively. The two solutions were mixed into a starting solution. The solution was dropped onto glass substrate, rotated at 3000 rpm, and dried at $300^{\circ}C$ for Cu-In as-grown films. The as-grown films were sulfurized inside a graphite container box and chalcopyrite phase of $CuInS_2$ was observed. To determine the optical properties measured optical transmittance of visible light region (380~770 nm) were less than 30 % in the overall. The XRD pattern shows that main peak was observed at Cu/In ratio 1.0 and its orientation was (112). As annealing temperature increases, the intensity of (112) plane increases. The unit cell constant are a = 5.5032 and c = 11.1064 $\AA$, and this was well matched with JCPDS card. The optical transmittance of visible region was below than 30 %.

• Korean Journal of Veterinary Research
• /
• v.39 no.1
• /
• pp.118-125
• /
• 1999

Porcine Proliferative Enteropathy(PPE) is an infectious enteric disease and a major cause of economic loss in swine industry due to weight loss, poor growth and sudden death in growing and finishing pigs at 6 to 20 weeks of age. PPE has been diagnosed by clinical signs, syndrom and lesions in the intestine in Korea. However, the diagnostic method had several problems in the detection of infected or carrier pigs. Therefore, in this study, we established the polymerase chain reaction(PCR) which was a fast, specific and sensitive method for identification of Lawsonia intracellularis (L intracellularis). We designed and synthesized primer on the 16S rDNA and p78 gene encoding L intracellularis. Specificity of the method was confirmed by comparison of the PCR results using other enteric bacteria and the study has shown that PCR method was sensitive to detect 1ng of genomic DNA as a template. Identity of the PCR products was confirmed by comparison of pattern of restriction endonuclease analysis with restriction enzyme Hae III and Pst I. Also, the PCR method was applicable to the naturally affected pigs with PPE. Based on the results from this study, the PCR method could be used as a fast and specific diagnostic tool for PPE.

• The Korean Journal of Applied Statistics
• /
• v.32 no.3
• /
• pp.331-348
• /
• 2019

Understanding the tumor heterogeneity due to differences in the growth pattern of metastatic tumors and rate of change is important for understanding the sensitivity of tumor cells to drugs and finding appropriate therapies. It is often possible to test for differences in population means using t-test or ANOVA when the group of N samples is distinct. However, these statistical methods can not be used unless the groups are distinguished as the data covered in this paper. Statistical methods have been studied to test heterogeneity between samples. The minimum combination t-test method is one of them. In this paper, we propose a maximum combinatorial t-test method that takes into account combinations that bisect data at different ratios. Also we propose a method based on the idea that examining the heterogeneity of a sample is equivalent to testing whether the number of optimal clusters is one in the cluster analysis. We verified that the proposed methods, maximum combination t-test method and gap statistic, have better type-I error and power than the previously proposed method based on simulation study and obtained the results through real data analysis.