• The International Journal of Costume Culture
• /
• v.6 no.2
• /
• pp.126-133
• /
• 2003

The purpose of this study was to develop the sizing system for men's glove. The combination of anthropometric and engineering aspects of glove pattern-making is difficult problem in engineering clothing. And the traditional measurements is not enough for glove. Therefore, to develop the hand measurement method and dimension for glove, a comprehensive list of candidate measurements was reviewed and the manufacturers (Their career was over the 15years) were interviewed on the method of glove pattern-making. This study was conducted traditional and creative 88 two-dimensional anthropometric measurements and 4 photometric measurements for glove pattern-making. In addition, 16 creative measurements were instrumented using a special hand measuring board for measuring of landmark locations on the hand. The subjects were 260 men's right hand in the age group of 18 to 35 years old in korea.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.2
• /
• pp.189-196
• /
• 1994

The purpose of this study is to develop a computer program for automatic dart manipulation, as well as basic pattern making, of women's front bodice. In addition to accuracy and efficiency In pattern making, this computer program provides variations of basic patterns through dart manipulation. AutoCAD, running on the Austin 486DX micro-computer is used for this research. The procedures of this study are as follows : 1. A pattern-making method for women's front bodice is selected. 2. All co-ordinate points are located following the same way and order of drafting. 3. Drafting of a basic front bodice is programmed 4. Functions for various single dart manipulations are defined. 5. Menu-driven user interface is developed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.156-157
• /
• 2016

Construction projects have shown a dramatic increase in size and complexity during the recent years that precise management has been recognized as one of key factors leading the project to success. It has been investigated that management in construction sites is generally done based on the experience of site engineers. Such experience based decision making lacks reliability that could bring disastrous results such as delay and cost overruns. The purpose of this study is to suggest a process progress pattern analysis method that is expected to be used as an objective reference for site managers to aid the decision making done regarding process progress management.

• Journal of the Korean Home Economics Association
• /
• v.35 no.4
• /
• pp.159-172
• /
• 1997

The purpose of this study was to investigate the slacks pattern making on the movement -fitness of the hip region. The experimental items were divided into the 5 lower limb movements(M1-M5) and the 12 revision pattern constructions of slacks. This study was done by clothing pressure test sensory evaluation test and the difference shape-transformation of wearing-slacks. The summarized finding resulted from experiments and investigation are suggested as follows: First by the clothing pressure tested by lower limb movements the clothing pressure score of the rabbit leap movement(M3) was the highest of all lower limb movements and the order of it in the another movement was the sit on knee(M4) the sit on chair(M2) the noble sitting(M5) from the highest to the lowest. And in comparision of clothing pressure tested by revision pattern to cover the extend of crotch-length 20。 inclined back-line construction method (CA4) showed the lowest. And in comparision of clothing pressure tested by revision pattern to cover the extend of crotch-length 20。 inclined back-line construction method (CA4) showed the lowest. And also for a role to cover hip circumference extendign CC4(1/5 hip.1cm longrightarrow linked back -line) method showed the lowest. Second by the sensory evaluation test based on the movement and revision patterns it was found that the functional factor score of the rabbit leap movement was the lowest in all movement however the score of revision patterns were higher than basic pattern. Third by the test to show difference in the shape-transformation of wearing-slacks on chair(M2) also need to be analyzed. The ration of the shape-transformation of the knee region showed the least value in the increased patterns of inclined angle of back-line(CA) and the differential methods of back-line inclined pattern making. But that of the hem-line did not show remarkable difference.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.11 no.2 s.24
• /
• pp.23-36
• /
• 1987

The purpose of the suudy was to develop a computer program for pattern mating of women's pant's. Computerization of the pattern making process was expected to provide higher accuracy and efficiency in pattern mating. The VAX-11/750 Computer and the CALCOMP PLOTTER 965 were used in this study. The procedures of the study were as follows : 1. A slacks pattern was selected. 2. The co-ordinate points were indicated relative location of all necessary in draffing. Total sixty co-ordinate points were instituted from (AX(1), AY(1)) to (AX(24), AY(24)), from (BX(1), BY(1)) to (BX(36), BY(36)). 3. A program for drafting was developed. Refer to (Table 3). 4. The procedures of drading of standard size were accomplished by using same method. The program was developed to drafting pattern for women by putting indivisual body measurement. The body measurements for stacks pattern were as follows : slacks length. Croach length. Hip length. nip circumference. waist circumference.

• The Research Journal of the Costume Culture
• /
• v.15 no.6
• /
• pp.1038-1052
• /
• 2007

The purpose of this study is to analyze present the pattern making of the lining fabrics calculating the right ease and rising quantities of arm-hole when the pattern of the lining fabrics of stretchable jacket fabrics is produced. The outcomes of this study are as follows. The right ease of lining fabrics was not room of 0cm as patterns being same the right side of fabrics in the girth of the chest, waist, and the edge of a garment and gets the most excellent valuation, and then the girth of the chest, and waist was applied to 2cm and around the edge of a garment 0cm in regular lining fabrics. In addition to, although the ease of patterns of the lining fabrics was more, it was not necessarily to satisfy. The result of the valuation according to the quantities of rising arm-hole of the pattern of the lining fabrics showed that the making lining fabrics that the quantities of rising arm-hole was 0.8cm in the body and 1.2cm in the sleeve in the both the stretchable fabrics and regular lining fabrics was the most excellent thing, and then 0cm in the body and 2cm in the sleeve, and then 0cm in the body and 0cm in the sleeve. The valuation of external appearance on the quantities of rising arm-hole was recognized similarly because of being rarely significance level, but around the chest and waist was recognized as being significance level in wearing satisfaction.

• Korean Journal of Human Ecology
• /
• v.16 no.4
• /
• pp.801-811
• /
• 2007

This study attempts to propose a pattern design of snug fitting midi briefs for women. Each briefs made of two kinds of fabric, cotton 40's and cotton 40's spandex, was produced for the research in a different shrinkage rate. The result of wearing test of the briefs-sold-in-the-market (BSM) and the briefs-specially-made-for-this-research (BSMR) were as follows: BSMR showed a higher mark than that of BSM in the sense of close fit on the torso, comfortableness, sense of being tight, satisfaction and beauty. In particular, the back design line of BSM gave a lower satisfaction to test wearers, while that of BSMR gave a more comfortableness to them, making their hip comfortably being wrapped by making smoother the angle of the straight line linking sidelines with clutch part, and making sidelines into curve. In a forward research, further studies about grading and other patterns but midi pattern of briefs would be examined.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.4
• /
• pp.617-627
• /
• 2010

This study selected and compared 7 tailored collar making factors from 15 clothing construction university textbooks. According to the results, in 15 clothing construction textbooks, the neckline of a tailored collar was drawn at the same length as the back neck circumference of the bodice and the length of collar stand was 3cm in 10 textbooks. In addition, the length of the collar laying varied between 2cm and 4.5cm regardless of the width of the upper collar or the textile thickness. In 7 out of the 15 textbooks, the gorge line of the collar was drawn by illustrating the collar pattern on the bodice based on the roll line and then copying it symmetrically. On the other hand, the pattern of upper collar was made in 5 ways; and 2 books did not give any explanation in the sections dealing with patterns or sewing. In addition, 6 textbooks explained that inner and outer collars are sewn with a difference. The lapel pattern of the facing part was made in 4 ways; in addition, 3 textbooks did not provide an explanation and 4 books explained that the difference is given in the sewing. The textile thickness and elasticity need to be considered in collar pattern making; however, they were not specifically mentioned in most of the textbooks.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.881-882
• /
• 2006

In 1997, Dr. James Chien-Min Sung patented the technology of making diamond tools according to a predetermined pattern. The optimization of this pattern may double the tool life and the cutting speed. In 1998, Sung also made $DiaGrid^{(R)}$ saw segments that showed superior performance in cutting granite and marble. In 2000, Sung visited Shinhan and introduced them this revolutionary concept of diamond saw segments. In 2005, Shinhan adapted the idea and produced saw segments with diamond grits set in a predetermined pattern, their results confirmed that the sawing speed and the sawing life were both improved over conventional designs.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.5
• /
• pp.1291-1295
• /
• 1999

Modern functional languages provide some forms of pattern matching capability in them. However, these forms are on an ad-hoc basis and vary from languages to languages, making the user hard to understand the feature. To overcome this problem, we present a systematic approach to adding pattern matching to functional language. We extend to the core functional language with pattern matching capability and illustrate several examples of the language. We also discuss how to extend the pattern matching capability to higher-order terms.