• 대한공간정보학회지
• /
• 제11권1호
• /
• pp.45-49
• /
• 2003

본 연구는 대구 - 부산간 고속도로 건설구간 내에서 고고학적 유적지가 분포 예상되는 지역에서 비파괴 물리탐사방법인 GPR 탐사방법을 이용하여 트렌치 조사 이전과 이후로 나누어서 각각 실시하였다. 이 결과로 자갈 및 모래가 많은 지층은 실트 및 점토가 많은 지층보다 불규칙한 반사면들로 구성되어 있고, 일부 구간에서는 불규칙적인 요철 모양의 반사면들이 위치하는 것으로 해석되며, 이는 트렌치 조사 후에 지석묘 또는 다수의 석기가 출토된 것으로 확인되었다.

• 한국분무공학회지
• /
• 제22권1호
• /
• pp.29-35
• /
• 2017

This paper describes the effects of spray breakup model constants on spray and combustion characteristics in single cylinder compression engine. KIVA-3V code coupled with a CHEMKIN chemistry solver was used for numerical analysis. In this study, spray simulations and combustion simulations are studied simultaneously. Spray simulation was conducted in constant volume to reduce the effects of air-flow as swirl or tumble. The model validation was conducted and there are little difference between experiments and simulation, this differences were reasonable. In spray simulation, the effects of model constants on spray tip penetration, spray patter and SMD were studied. Furthermore, the analysis of effects of breakup variables on combustion and emissions characteristics was conducted. The results show the KH-RT breakup model constants affects spray and combustion characteristics strongly. Increasing KH model variable (B1) and RT model constants ($C_{\tau}$, $C_{RT}$) induced slower breakup time.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.2153-2158
• /
• 2016

Multimedia such as image, audio, and video is easy to create and distribute with the advance of IT. Since novice uses them for illegal purposes, multimedia forensics are required to protect contents and block illegal usage. This paper presents a multimedia forensic algorithm for video to identify the device used for acquiring unknown video files. First, the way to calculate a sensor pattern noise using Wiener filter (W-SPN) is presented, which comes from the imperfection of photon detectors against light. Then, the way to identify the device is explained after estimating W-SPNs from the reference device and the unknown video. For the experiment, 30 devices including DSLR, compact camera, smartphone, and camcorder are tested and analyzed quantitatively. Based on the results, the presented algorithm can achieve the 96.0% identification accuracy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.161-164
• /
• 1999

Estimation system of aging diagnosis using partial discharge(PD) is being highlighted as a research area for the residual lifetime pridiction of industrial equipment. But the application of PD requires complicated analysis method as expert system because the PD has complex progressing forms according to external stress. In this paper, it has been investigated the statistical distribution to express the 2D PD patterns of the diagnosis system using neural network(NN).

• Animal Systematics, Evolution and Diversity
• /
• 제4권2호
• /
• pp.91-102
• /
• 1988

Both Cobitis lutheri Rendahl and C.striata Ikeda previously regarded as the subspecies of C.taenia are revised here and raised to the species rank based on the distinct color pattern on their body sides in relation to the shpae of lamina circularis and suborbital spine, and distinct distributional patter. C. lutheri was similar to C. striata in chromosome number and karyotype, but chromosomal polymorphism as Robert sonian event was confirmed only in the population of C.lutheri studies. Both, C. kutheri and C..striata have disjunct ranges : the former in western Korea and east-northern China Mainland, the latter in the Smjin River of korea and west-southern Japan. hybridization between C. lutheri and C. striata by secondary contact appeared in the limited zone of the Dongjin River, Chllabuk-do province, korea, but the evidence for habitat segregation between them suggests the possibility that natural hybridization occurs between the two species and introgression results. We consider that the two species were produced as ecological equivalent species in the different branch stream of the Paleo-Hwangho River , The time of recession of sea level during the gracial period.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2001년도 봄 학술발표논문집 Vol.28 No.1 (A)
• /
• pp.616-618
• /
• 2001

J2EE(Java™ 2 Platform, Enterprise Edition) 커넥터 아키텍처(Connector Architecture)는 J2EE 플랫폼을 다양한 EIS와 연결하기 위하여 공통 클라이언트 인터페이스(CCI:Common Client Interface)를 정의한다. CCI의 커넥션 메커니즘은 추상 팩토리 패턴(Abstract Factory Pattern)을 따르고 있다. 추상 팩토리 패턴을 이용함으로써 커넥터 아키택처는 각기 상이한 커넥션과 커넥션 팩토리가 독립적인 벤더들에 의해 독립적으로 구현될 수 있게 한다. 브리지 패턴(Bridge Pattern)은 추상화 정도와 구현에 따라 추상 클래스와 구현 클래스를 별도의 클래스로 구현하여 이들이 동적으로 조합되도록 한다. 본 논문에서는 추상 팩토리 패턴을 따르고 있는 CCI의 터넥션 메커니즘을 브리지 패턴을 적용하여 확장된 커넥션 메커니즘을 제시한다. 추상 팩토리 패턴은 클래스의 생성과 관련 있는 생성 패턴(Creational Pattern)인 반면 브리지 패턴은 구조 패턴(Structural Pattern)이다. 즉, 대행하는(delegation)클래스의 행위들을 중계해 준다. 구조 패턴은 새로운 기능을 구현하기 위해 객체를 구성하는 방식에 초점을 두며, 실행 시에 객체 컴포지션 구조를 변경할 수 있어 이를 통해 유동성과 확장성을 추가할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.509-513
• /
• 2005

In order to increase productivity in conventional stereolithography. Microstereolithography using a digital micramirror device $(DMD^{TM})$ as a dynamic patter generator is proposed The deviation from a level of clear optical images to a level of a photopolymer surface is a key for the fabrication of an accurate 3D structure. so this deviation is minimized by controlling the viscosity of FA1260T with organic solvents. After finding the appropriate process valuables (exposure time of optical images. layer thickness of each layer). the feasibility of microstructures such as a microgear and a microsphere is then demonstrated. Microstereolithography wi th $DMD^{TM}$ might eventually replace conventional laser induced microstereolithography market such as in the manufacturing of jewels and medical parts.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.454-459
• /
• 2006

There are two main streams for pattern classification technology One is the method using PCA (Principal Component Analysis) and the other is the method using Neural network. Both of them have merits and demerits. In general, using PCA is so simple while using neural network can improve algorithm continually. Algorithm using neural network needs so many calculations rendering very slow response. In this work, an attempt is made to develop algorithms adopting both PCA and neural network merits for simpler, but faster and smarter.

• 지구물리
• /
• 제7권4호
• /
• pp.247-253
• /
• 2004

3차원 형상화를 통한 분석이 많은 분야에서 연구 및 적용되고 있다. 3차원 형상화는 사진영상의 중첩에서 (3차원)레이저 스캐닝(laser scanning)으로 발전을 하여 가고 있으며, 각 방법이 각기 그 자체로서 발전을 해가고 있는 추세이다. 본 연구에서는 물체에 대한 데이터베이스를 구축하여 대상 이미지에 대하여 기하학적 패턴 매칭(patter matching)을 기반으로 한 인지(인식) 알고리즘을 도입하여 3차원 형상화를 통한 지질 및 지반조사를 위한 기초 기술로 활용하고자 하였다. 물체의 외형적인 성질에 기반하며 특별한 광원없이 물체를 인지할 수 있는 3차원 형상화 알고리즘은 지질 및 지반조사 분야 외에서도 많은 도움이 될 것이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2862-2867
• /
• 2007

The steady non-reacted compressible flow field in a symmetric micro-thruster, which is used for the accurate attitude control of a satellite, is analyzed varying the nozzle pressure ratio (NPR) to investigate the plume characteristics. The nozzle throat diameter is 0.06 inch and the area ratio is 56. The recirculation region is found just behind the normal shock at the several NPRs due to the locally adverse pressure gradient along the nozzle centerline when the environmental pressure is atmospheric. This phenomenon, the cause of flow loss, is similar to the flow behind a blunt body. As NPR increases the location of Mach disk, characteristics of the normal shock, moves downstream and its strength increases. The Mach number distribution appears in a wave-type patter after the normal shock because oblique shocks are reflected on the shock boundaries especially when NPRs are very high.