• Journal of Korean Clinical Nursing Research
• /
• v.20 no.1
• /
• pp.134-145
• /
• 2014

Purpose: The purpose of this study was to develop and apply a video dietary instruction program for hemodialysis patients to understand dietary compliance as well as the effect on the physiological indicator. Methods: This is a quasi-experimental study of a nonequivalent control group pre-post test design. Data were collected from August 6, 2012 to January 10, 2013. Twenty patients were assigned to an experimental group and twenty-one patients were assigned to a control group. A video dietary instruction program was developed and applied only to the experimental group once a week for a total of 8 weeks. Dietary compliance and physiological indicators were subsequently measured. Results: Dietary compliance was improved in both groups over time. There was no significant change in the physiological indicator value in both groups, indicating that there was no correlation between the treatment type and time. Conclusion: The video dietary instruction program could not make a statistically significant change on the physiological indicator value of the experimental group; however, this change was maintained within the allowable limits. Therefore, the video dietary instruction program can be utilized continuously as a standardized nursing intervention program in order to maintain the dietary compliance of hemodialysis patients.

• Journal of Acupuncture Research
• /
• v.17 no.3
• /
• pp.250-264
• /
• 2000

A retrospective study has been carried out for 47 cases of traffic accident victims which was entered to the Dongguk Bundang O. M. Hosp. from Jan 1, 1999 to May 4, 2000. This study was focused on finding out the distribution, pattern of the traffic accidents, clinical characteristics of the patients, motives of their choosing oriental medical treatments, the kinds of oriental medical treatment. This results were as follows : 1. The highest incidence was shown in the age of twenties to thirties as much as 59.6% and the ratio of male to female was 17:30. 2. 80.9% of all patients was injured by car accidents. 68.2% of all patients was injured as drivers and passengers and 19.2% was injured as pedestrians. The highest type in the collision between cars, was rear impact. 3. The number of patient(61.7%) via other hosp. was more than that of the first visitor(38.3%) to our hosp. 4. In admission motives, The patients who had been treated by western medical treatment, expressed the dissatisfaction of that treatment, so hoped to be treated by oriental medical styles. Also The others wanted to be treated by oriental medical methods in the reason of no deep surgical, orthopaedical lesions 5. C-spine sprain(80.9%) was the most frequent out of all patients's diagnosis and then L-spine sprain(51.1%), contusion(46.8%), etc. 6. Head Cervix(80.9%) was the commonest pain region of all patients. and then shoulder back(70.2%), lumbar region(61.7%), etc. 7. In general, the pedestrian injuries were more serious than those sustained in the car as passengers. 8. After discharge, Duration of OPD treatment was long as much as that of admission treatment. 9. At first stage of admission period, Herb medication was frequently prescribed for hwalhyultonglakgige(活血通絡之劑). but As going to end stage, was frequently used for bogi(補氣) bohyul(補血), gudam(祛痰), ansin(安神).

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.1
• /
• pp.39-46
• /
• 2012

We can adapt telemedicine systems in advancement of information technology capabilities and increase of network bandwidth. The telemedicine service can be applied to a public health center, a school, a prison and islands in lacks of medical equipments and medical staffs. The telemedicine services which can be provided high quality medical services. We designed the multiple control server system consisting 3 sub-function, patients and doctors name list, network types, connection states and computer equipments. The telemedicine link configuration was decided as 'Flowing', or 'By-passing' in accordance the network type and bandwidth of patient systems or doctor systems. The multiple control server system was performed the best communication configuration over heterogeneous networks. This system was achieved high quality telemedicine services through dynamic wired and wireless networks at any time. This study represented a hybrid multimedia telemedicine system over heterogeneous networks. We expected that the designed system could provide not only the high quality services, tele-diagnosis and tele-consultation, but also the effective emergency telemedicine services to multi-patients in the heterogeneous network environments.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.16 no.2
• /
• pp.123-129
• /
• 2016

Background: The objective of the present study was to examine the status of patients who had received dental treatment under intravenous (IV) sedation at Chungnam Dental Clinic for the Disabled in Korea from its inception to the present time, and to review the analysis results. Methods: Retrospective analysis was performed on 305 cases of patients who had received dental treatments under IV sedation between January 2011 and May 2016. The analysis examined the patient's sex, age, primary reason for IV sedation, duration of anesthesia and dental treatment, type of dental treatment performed, number of clinical departments involved in the dental treatment and level of multidisciplinary cooperation, and annual trends. Results: Most dental treatments using intravenous sedation were performed on medically disabled patients or dentally disabled patients with an extreme gag reflex or dental phobia. The mean duration of IV sedation was 72.5 min, while the mean duration of treatment was 58.0 min. The types of dental treatments included surgical treatment (n = 209), periodontal treatment (n = 28), prosthodontic treatment (n = 28), restorative treatment (n = 23), implant surgery (n = 22), endodontic treatment (n = 9), reduction of temporomandibular joint dislocation (n = 1), and treatment of traumatic injuries (n = 1), with treatments mostly performed on adult patients. Conclusions: With increasing demand for minimally painful treatment, cases using IV sedation are on an upward trend and are expected to continue to increase.

• Journal of Technologic Dentistry
• /
• v.39 no.1
• /
• pp.25-33
• /
• 2017

Purpose: The aim of this study was to evaluate accuracy of glass fiber mesh complete denture of before and after curing. Methods: Edentulous model was selected as the master model. Ten study models were made by Type IV stone. Wax complete dentures were produced by the denture base and artificial teeth. CD and GD groups were measured six measurement distance before curing. The wax complete denture was investment after measurement is completed. Using a heat polymerization resin was injected resin. After injecting the resin it was curing. A complete denture was re-measured after curing. The measured data was verified by paired t-test. Results: Overall CD group was larger the value of the measured length. In the CD group, A-D point was larger. The smallest point was the B-D point. However, there was no statistically significant difference only C-D point(p>0.05). In the GD group, A-B point was larger. but B-D point was the smallest. A-D and B-C statistically points showed significant differences(p<0.05). Conclusion: Glass fiber mesh resin complete denture can be clinically applied to the edentulous patient.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.4
• /
• pp.407-413
• /
• 1999

Maxillary duplication is a kind of proliferative neurocristopathy and considered to arise from bifurcation of neural crest elements soon after migration into mandibular arch. Sometimes this malformation is accompanied with oblique facial cleft. Usually this type of maxillofacial malformation requires multiple surgical intervention and the results are far from ideal. It became more troublesome if it had not been properly corrected on time, because secondary deformities could be developed from growth and development of abnormal tissues. This is a case of a 25-year-old-female patient who showed severe facial asymmetry thought to secondary deformity of maxillary duplication and masticatory disturbance due to multiple supernumerary teeth on posterior part right maxilla. We successully treated these deformities through four times of surgery of bone resection, orthodontic treatment, zygomatic and orbital reconstruction, orthognathic surgery and scar revision... ect. So we reported this rare case with review of literatures.

• Imaging Science in Dentistry
• /
• v.35 no.2
• /
• pp.111-114
• /
• 2005

A 15-year-old patient, who had been diagnosed and treated as Burkitt cell type acute lymphoblastic leukemia (ALL-L3) already, visited our department. He complained of gingival enlargement and loosening teeth 1 month ago. The clinical examination revealed anterior open bite, gingival enlargement, and nontender swelling particularly in molar regions of both jaws. Deep periodontal pockets and severe mobility was shown on most of the teeth. The panoramic radiographs showed severe bone destruction and extrusion of the molars. The contrast enhanced CT showed multiple enhanced mass and bone marrow obliteration in both jaws. Chemotherapy was done and the swelling was subsided at 1 month later. In conclusion, radiologic findings of leukemia with soft tissue mass, known as chloroma or granulocytic sarcoma, mimic those of lymphoma, so blood test may be needed for the final diagnosis.

• Imaging Science in Dentistry
• /
• v.40 no.4
• /
• pp.155-158
• /
• 2010

Digital radiographic systems allow the implementation of a fully digital picture archiving and communication system (PACS), and provide the greater dynamic range of digital detectors with possible reduction of X-ray exposure to the patient. This article reviewed the basic physical principles of digital radiographic imaging system in dental clinics generally. Digital radiography can be divided into computed radiography (CR) and direct radiography (DR). CR systems acquire digital images using phosphor storage plates (PSP) with a separate image readout process. On the other hand, DR systems convert X-rays into electrical charges by means of a direct readout process. DR systems can be further divided into direct and indirect conversion systems depending on the type of X-ray conversion. While a direct conversion requires a photoconductor that converts X-ray photons into electrical charges directly, in an indirect conversion, lightsensitive sensors such as CCD or a flat-panel detector convert visible light, proportional to the incident X-ray energy by a scintillator, into electrical charges. Indirect conversion sensors using CCD or CMOS without lens-coupling are used in intraoral radiography. CR system using PSP is mainly used in extraoral radiographic system and a linear array CCD or CR sensors, in panoramic system. Currently, the digital radiographic system is an important subject in the dental field. Most studies reported that no significant difference in diagnostic performance was found between the digital and conventional systems. To accept advances in technology and utilize benefits provided by the systems, the continuous feedback between doctors and manufacturers is essential.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.4
• /
• pp.500-509
• /
• 2000

In general, the three major oral functions of edentulous patients-mastication, phonation, esthetics-can be rehabilitated by the complete dentures, and both the resin based complete denture and the metal based complete denture are commonly used by many clinicians today. For the sake of many advantages such as the excellent thermal conductivity, low volumetric change, high strength, low risk of fracture and the better patient's adaptation, the metal based complete dentures are indicated to the several cases. But, there are common failures of these type of dentures mainly by the fracture or the debonding between the resin structures and the metal frameworks which is caused by the discrepancies of the flexural strength and the coefficient of thermal expansion. This is aggravated by the water contamination of the interface when exposed to the oral environment and results in the failure of complete denture treatment. So, the purpose of this study is to compare the bond strength and the fracture patterns of the gold alloy based and the Co-Cr alloy based complete dentures using the PMMA resins and the 4-META adhesive resins. The results of this study were as follows. 1. Both to the PMMA resin and the 4-META resin, the flexural bond strength of gold alloy is lower than that of Co-Cr alloy(P<0.05) 2. To the Co-Cr alloy, the bond strength of the 4-META resin is significantly higher than that of PMMA resin(P<0.05). 3. The flexural strength of the group with the mechanical retention form is significantly higher than that of the group without retention form(P<0.05). 4. Comparing with the other groups, the fracture patterns of the group 3 are quite different from the group 1,2,5.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.4
• /
• pp.544-551
• /
• 2000

A fabrication method of inner and outer crown using CAD/CAM is presented. The information of abutment teeth is transferred to a computer through a 3-dimensional scanner. A Konus inner and outer crown is designed on a computer and a real crown is machined based on this design using CAM. This method can save laboratory time and reduce inaccuracies compare to conventional casting procedure. A stone model with six prepared abutment teeth from a patient was used in this study. Three dimensional information from the model was transferred to a computer using a contact type 3-dimensional scanner with a $25{\mu}m$ accuracy. All margins were identified on a computer image where there is a change in surface taper of a model. To provide a cement space, the image of a inner sur face of a Konus inner crown was duplicated $25{\mu}m$ apart from the surface of a prepared abutment teeth image. The cement space was $20{\mu}m$ at the cervical margin. All Konus crowns were machined with a $10{\mu}m$ accuracy. It was concluded that this method can reduce working-time for the laboratory process and increase accuracy. A further research is required to make a simplified process for a more complex prosthesis.