• 한국CDE학회논문집
• /
• 제12권5호
• /
• pp.354-365
• /
• 2007

We present novel methods to generate a sequence of shapes that represents the pattern of morphological development or transformation of Bezier curves. The presented methods utilize the intrinsic geometric structures of a Bezier curve that are derived from rib and fan decomposition (RFD). Morphological development based on RFD shows a characteristic pattern of structural growth of a Bezier curve, which is the direct consequence of development path defined by fans. Morphological transformation based RFD utilizes development patterns of source and target curves to mimic the theory of evolutionary developmental biology: although the source and target curves are quite different in shapes, we can easily find similarities in their younger shapes, which makes it easier to set up feature correspondences for blending them. We also show that further controls on base transformation for intensity of feature blending, and extrapolation can compensate the immaturity of blended curves. We demonstrate the experimental results where transformation patterns are smoother and have unique geometric style that cannot be generated using conventional methods based on multi-linear blending.

• 한국동물학회지
• /
• 제30권4호
• /
• pp.417-431
• /
• 1987

Isozyme analysis, morphometric comparison, and artificial hybridization test wereperformed to elucidate the patterns of genic variation, morphological differentiation, genetic incompatibility, and a probable path in speciation between two MDH allelotypes (MM type and MS type) of the Dark Chub Zacco temmincki, a fresh water fish inhabiting in Korean waters. The degree of genic variation of MS type(HD=.023, HG=.021) was twofold higher than that of MM type (HD=.013, HG=.014) but both allelotypes were far less than the average genic variation of fresh water Bish in general. The average genetic similarities among 7 populations of MM type and 6 Populations of MS type were S=.947 and S=.966 respectively, whereas the value between two allelotypes was S=.853. Presumed divergent time of two allelotypes was estimated to be about 700 thousand years ago. Discriminant function analysis based on 18 morphometric characters of 302 specimens representing 12 populations revealed no morphological difference between two allelotypes. Artificial hybridization test indicates that there is an obvious genetic incogpatibility between two allelotypes and therefore it is assumed that isolating mechanism is completed.

• Journal of Mechanical Science and Technology
• /
• 제20권10호
• /
• pp.1680-1690
• /
• 2006

As a promising and novel manufacturing technology, laser aided direct metal deposition (DMD) process produces near-net-shape functional metal parts directly from 3-D CAD models by repeating laser cladding layer by layer. The key of the build-up mechanism is the effective control of powder delivery and laser power to be irradiated into the melt-pool. A feedback control system using two sets of optical height sensors is designed for monitoring the melt-pool and real-time control of deposition dimension. With the feedback height control system, the dimensions of part can be controlled within designed tolerance maintaining real time control of each layer thickness. Clad nugget shapes reveal that the feedback control can affect the nugget size and morphology of microstructure. The pore/void level can be controlled by utilizing pulsed-mode laser and proper design of deposition tool-path. With the present configuration of the control system, it is believed that more innovation of the DMD process is possible to the deposition of layers in 3-D slice.

• 한국안전학회지
• /
• 제29권4호
• /
• pp.61-72
• /
• 2014

The aim of this study is to define the condition of optimal pre-treatment for preferable activated carbon fibers (ACFs), which are based on rayon fibers. This paper shows the ideal path of ACFs preparation process; implies that rayon fibers are pre-treated by various solvents with different times before the heating process. The pre-treated rayon fibers finally turned into desirable rayon fiber-based ACFs through optimal pre-treatment condition by heating processes. The thermal analysis method of pre-treated rayon fibers by thermo-gravimetry analyser (TGA) is an idealized tool, which analyzes the best thermal condition of pre-treatment process. Surface morphologies of resulting rayon fibers based ACFs were examined by scanning electron microscope(SEM). The results of TGA and SEM analyses show that the optimal pre-treatment condition for preparing ACFs was clearly defined, in terms of thermal stability and surface morphology.

• Restorative Dentistry and Endodontics
• /
• 제40권2호
• /
• pp.166-171
• /
• 2015

A palato-radicular groove (PRG) is a developmental anomaly primarily found in the maxillary lateral incisors. It is a potential communication path between the root canal and the periodontium that decreases the survival prognosis of the affected tooth, therefore compromising the stability of the dental structure in the oral cavity. The aim of this case report is to present an original technique where a PRG was treated by means of intracanal disinfection, PRG sealing with glass ionomer, replantation with intentional horizontal 180 degree rotation of the tooth, and an aesthetic veneer placed to provide adequate tooth morphology. The clinical and biological benefits of this novel technique are presented and discussed.

• 한국수정란이식학회지
• /
• 제15권3호
• /
• pp.211-218
• /
• 2000

This experiment was conducted to investigate the effect of the cysteine and glutathione on the motility index and morphology of human spermatozoa at the sperm processing in vitro. After treating the sperm with medium containing cysteine and glutathione, we measured the motility index and morphology at 0.5 h and 24 h. 1. Following the sperm culture for 0.5 h after treating the sperm with the medium containing 0, 1, 5, 10 mM cysteine, curvilinear velocity (VCL) was significantly (p<0.05) higher in control than that in all treatments. And straight-line velocity (VSL) was high at 1 mM and average path velocity (VAP) was low at 5 mM and 10 mM. But the motility (MOT) and morphology (NOM) were not different between control and all treatments. Following the sperm culture for 24 h, the MOT was significantly high in treatment groups (58.9, 74.4 and 62.3%), compared with that in control(28.7%) and the VCL was also high in treatment groups (31.4, 37.9, and 34.0 ${\mu}{\textrm}{m}$/s), compared with that in control (21.3 ${\mu}{\textrm}{m}$/s). The VSL (18.4, 21.7, and 18.9 ${\mu}{\textrm}{m}$/s) was significantly higher than control (10.7 ${\mu}{\textrm}{m}$/s) and the VAP (20.3, 24.7, and 21.4 ${\mu}{\textrm}{m}$/s) in treatments was also compared with that in control (12.6 ${\mu}{\textrm}{m}$/s). The NOM was not difference between control and treatments. 2 Following the sperm culture for 0.5 after treating the sperm with the medium containing 0, 1, 5, 10 mM glutathione, the MOT, VCL, VSL, VAP, and NOM were not different between control and treatments. Following the sperm culture for 24 h, the MOT was higher in treatment groups (82.9, 83.6, 83.4%) than in control (51.1%) and the VCL was higher in treatment groups (50.9, 51.3, and 49.4 ${\mu}{\textrm}{m}$/s) than control (34.1 ${\mu}{\textrm}{m}$/s). The VSL was also higher in treatment (17.1 ${\mu}{\textrm}{m}$/s) and the VAP was also higher in treatment groups (30.1, 32.5, and 29.7 ${\mu}{\textrm}{m}$/s) than in control (19.8 ${\mu}{\textrm}{m}$/s). The NOM was not different between control and treatments.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.657-662
• /
• 2005

In this study, the deposition of micrometer-scale metallic interconnects on LCD glass for the repair of open-circuit type defects is investigated. Although there had been a few studies Since 1980 s for the deposition of metallic interconnects by laser-induced chemical vapor deposition, those studies mostly used continuous wave lasers. In this work, a third harmonic Nd:YLF laser (351nm) of high repetition rates, up to 10 KHz, was used as the illumination source and $W(CO)_6$ was selected as the precursor. General characteristics of the metal deposit (tungsten) such as height, width, morphology as well as electrical properties were examined for various process conditions. Height of the deposited tungsten lines ranged from 35 to 500 nm depending on laser power and scan speed while the width was controlled between $3\~50{\mu}$ using a slit placed in the beam path. The resistivity of the deposited tungsten lines was measured to be below 1 $O\cdot{\mu}m$, which is an acceptable value according to the manufacturing standard. The tungsten lines produced at high scan speed had good surface morphology with little particles around the patterns. Experimental results demonstrated that it is likely that the deposit forms through a hybrid process, namely through the combination of photolytic and pyrolytic mechanisms.

• Composites Research
• /
• 제12권6호
• /
• pp.53-64
• /
• 1999

LCP원섬유(fibril)와 폴리아미드6 (PA6)수지로 사출성형된 복합재료 박판(molded thin composite plaques)의 미세구조와 굽힘강도에 대한 에폭시수지 함유율의 효과를 살펴보았다. 성형은 LCP원섬유의 용융점 이하에서 하였으며 이렇게 만들어진 판재는 횡방향 배향을 보이는 두께 $65-120{\mu\textrm{m}}$의 표피층(surface skin layer), 유동방향과 거의 일치하는 배향을 보이는 표피아래층(sub-skin layer), 아크형 곡선유동형태를 보이는 심층(core layer)으로 구성되어 있었다. 에폭시함유율이 달라도 각 층의 미세구조방향은 유사하였으나 에폭시함유율이 증가함에 따라 LCP영역(domain)이 원섬유상에서 층상구조로 변했고 거시적 파괴진로(fracture path)는 인장형에서 전단형으로 바뀌었다. 또한 에폭시 4.8vol%에서 가장 우수한 굽힘강도와 파단변형율을 보였다. 굽힘강도를 수치해석한 결과 에폭시성분을 복합재에 부가하면 각 층의 두께와 미세구조 같은 기하학적인 형태가 변하면서 각 층 자체의 탄성계수와 강도가 열등화 되었음을 알았다.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.165-173
• /
• 2005

This paper presents the results for deposition of micrometer-scale metal lines on glass for the development of TFT-LCD circuit repair-system. Although there had been a few studies in the late 1980's for the deposition of metallic interconnects by laser-induced chemical vapor deposition, those studies mostly used continuous wave lasers. In this work, a third harmonic Nd:YLF laser (351nm) of high repetition rates, up to 10 KHz, was used as the illumination source and W(CO)s was selected as the precursor. General characteristics of the metal deposit (tungsten) such as height, width, morphology as well as electrical properties were examined for various process conditions. Height of the deposited tungsten lines ranged from 35 to 500 m depending on laser power and scan speed while the width was controlled between 50um using a slit placed in the beam path. The resistivity of the deposited tungsten lines was measured to be below $1{\Omega}{\cdotu}um$, which is an acceptable value according to the manufacturing standard. The tungsten lines produced at high scan speed had good surface morphology with little particles around the patterns. Experimental results demonstrated that it is likely that the deposit forms through a hybrid process, namely through the combination of photolytic and pyrolytic mechanisms.

• Journal of the korean society of oceanography
• /
• 제32권4호
• /
• pp.181-190
• /
• 1997

A large subtidal sand ridge (Jungang Satoe) in Asan Bay, on the west coast of Korea, was studied in order to understand the morphology and sediment transport trend in a macrotidal setting, by means of analyzing sediment samples, current data, side-scan sonographs and seismic profiles. The ridge is about 15 km long and 2-5 km wide, with a relief of about 15 m. It is elongated in the flow direction of flood (SE) and ebb (NW) tidal currents, but asymmetrical in cross section. The western and southwestern side of the ridge is characterized by relatively gentle slopes averaging 0.4$^{\circ}$, whereas on the northeastern side, relatively steep slopes were mapped with 1.6$^{\circ}$ slope angles. Tidal currents associated with the ridge are very strong; maximum surface velo-cities range from neap values of 50 cm/s to spring values of 130 cm/s. The shear velocities during flood and ebb are strong enough to erode and transport sands on the ridge. Sand waves and megaripples (dunes) are the most common bedforms produced by the tidal currents, which show regional differences in shape and size on the ridge. The distribution pattern of these bedforms in-dicates that the flood tidal currents are dominant on the offshore (northwest) side of the ridge, whereas the onsho.e (southeast) side of the ridge is ebb-dominated. The sand transport path as inferred from bedform orientations is directed toward the ridge crest on the flanks, whereas on the crest, it is near-longitudinal to the ridge axis. The convergent, upslope movement of sands on the ridge flanks appears to be important in sand ridge building and maintenance. A significant ridge migration toward the northeast can be suspected on the basis of the ridge morphology, which may cause offshore hazards for navigation.