• Journal of Semiconductor Engineering
• /
• v.3 no.2
• /
• pp.161-167
• /
• 2022

Electrical characteristics of LDMOS power device with LDD(Lightly Doped Drain) structure is studied with variation of the region of channel and LDD. The channel in LDMOSFET encloses a junction-type source and is believed to be an important parameter for determining the circuit operation of CMOS inverter. Two-dimensional TCAD MEDICI simulation is used to study hot-carrier effect, on-resistance Ron, breakdown voltage, and transient switching characteristic. The voltage-transfer characteristics and on-off switching properties are studied as a function of the channel length and doping levels. The digital logic levels of the output and input voltages are analyzed from the transfer curves and circuit operation. Study indicates that drain current significantly depends on the channel length rather than the LDD region, while the switching transient time is almost independent of the channel length. The high and low logic levels of the input voltage showed a strong dependency on the channel length, while the lateral substrate resistance from a latch-up path in the CMOS inverter was comparable to that of a typical CMOS inverter with a guard ring.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.155-164
• /
• 2015

This paper describes a design and implementation of CABAC decoder, which would handle HEVC syntax elements in adaptively pipelined-parallel computation manner. Even though CABAC offers the high compression rate, it is limited in decoding performance due to context-based sequential computation, and strong data dependency between context models, as well as decoding procedure bin by bin. In order to enhance the decoding computation of HEVC CABAC, the flag-type syntax elements are adaptively pipelined by precomputing consecutive flag-type ones; and multi-bin syntax elements are decoded by processing bins in parallel up to three. Further, in order to accelerate Binary Arithmetic Decoder by reducing the critical path delay, the update and renormalization of context modeling are precomputed parallel for the cases of LPS as well as MPS, and then the context modeling renewal is selected by the precedent decoding result. It is simulated that the new HEVC CABAC architecture could achieve the max. performance of 1.01 bins/cycle, which is two times faster with respect to the conventional approach. In ASIC design with 65nm library, the CABAC architecture would handle 224 Mbins/sec, which could decode QFHD HEVC video data in real time.

• Tunnel and Underground Space
• /
• v.22 no.6
• /
• pp.462-470
• /
• 2012

Implementing the generalized Hoek-Brown failure criterion in the framework of the Mohr-Coulomb criterion requires the calculation of the equivalent friction angle and cohesion. In the conventional method based on the Balmer (1952)'s theory, the tangential instantaneous friction angle and cohesion are expressed in terms of the minimum principal stress ${\sigma}_3$, which does not provide the information about the dependency of the equivalent parameters on the hydrostatic pressure and the stress path. In this study, this defect of the conventional method has been overcome by representing the equivalent parameters in terms of stress invariants. Through the example implementation of the new method, the influence of the magnitude of the hydrostatic pressure and the Lode angle on the tangential instantaneous friction angle and cohesion is investigated. It turns out that the tangential instantaneous friction angle is maximum when the stress condition is triaxial extension, while the tangential cohesion is maximum when the stress condition is triaxial compression. The dependency of the equivalent Mohr-Coulomb strength parameters on the hydrostatic pressure and the Lode angle tends to be more substantial for the favorable rockmass of larger GSI value.

• Tunnel and Underground Space
• /
• v.27 no.1
• /
• pp.39-49
• /
• 2017

The factor of safety (FOS) is commonly used as an index to quantitatively state the degree of safety of various rock structures. Therefore it is important to understand the definition and characteristics of the adopted FOS because the calculated FOS may be different according to the definition of FOS even if it is estimated under the same stress condition. In this study, four local factors of safety based on maximum shear stress, maximum shear strength, stress invariants, and maximum principal stress were defined using the Mohr-Coulomb and Hoek-Brown failure criteria. Then, the variation characteristics of each FOS along five stress paths were investigated. It is shown that the local FOS based on the shear strength, which is widely used in the stability analysis of rock structures, results in a higher FOS value than those based on the maximum principal stress and the stress invariants. This result implies that the local FOS based on the maximum shear stress or the stress invariants is more necessary than the local FOS based on the shear strength when the conservative rock mechanics design is required. In addition, it is shown that the maximum principal stresses at failure may reveal a large difference depending on the stress path.

• Journal of the Korean association of regional geographers
• /
• v.23 no.2
• /
• pp.239-256
• /
• 2017

This research is a theoretically grounded empirical study aimed at shedding light on the policy evolution of Technology Park(TP) in term of historical institutionalism in South Korea for the 16 years. The study analysed the evolution of TP, and the empirical fieldwork was completed in two regions, Gyeongsangbuk-do ana Daegu City. Historically the policy can be divided into three periods being affected by endogenous and exogenous impact. This research found that the functions of local TPs changed as following: six functions decided by central governments ${\rightarrow}$ added the role of supporting regional innovation ${\rightarrow}$ comprehensive support for small & medium-sized enterprise. Analysis of the empirical study reveals significant findings: first, the relationships between central government and local actors which was built in the quickening period have been path dependency. Second, the functions of local TPs were evolved with the characteristics of layering and reorientation of the institutions. Thirdly, there were some differentiation between the two regions because of the milieu, though the central government had the power deciding the functions.

• The Korean Journal of Air & Space Law and Policy
• /
• v.23 no.2
• /
• pp.93-114
• /
• 2008

The purpose of this study is to review the changes in the aviation safety management system, how that system has evolved and what forces caused these changes to take place. Also included is an examination of the development process of the aviation safety management system in view of the new institutionalism, identifying the patterns of change. Based on the results of this study, I propose policy methods to design a desirable civil aviation safety system with a view toward raising the safety standards in the Korean civil aviation community. The major analysis variables are as follows: first, aviation accidents caused by external factors and international standards as independent variables second, environmental changes and political processes affecting aviation safety management system as major mediating variables and third, the aviation safety management legal system, the aviation safety management organizations and an expert participation system as dependent variables. The institutional changes and continuance of the aviation safety management system show that when specific circumstances arise, the continuance lasts depending on the path dependency, and in a certain circumstance, when immanent changing factors reach a critical point, the system suddenly changes by a punctuated equilibrium, which are all included in this study.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.2
• /
• pp.133-145
• /
• 2019

This study was raised by the need to explain why the problems related to private parks have been sustained. In order to identify the fundamental cause, it is necessary to analyze the historical and institutional context of private parks. Therefore, the purpose of this study is to identify the direction of change in the private park system and to derive the characteristics of the system as it currently appears. The framework based on the historical institutionalism was divided into the Park Act (1967-1980), the former of Urban Park Act (1980-1993) and the late of Urban Park Act (1993-2005), and each was assessed using the analysis elements of the institutional environment and the outcomes of implementation. The analysis elements interpreted the path dependency, in which the inertia toward the choice of institution is maintained, despite the change in the environment. The institution took a special form of 'negative systeme' and secured profitability by expanding the types of park facilities while mitigating the criteria. Additionally, the designation of private park promoters as a landowner acted as a means of compensating those with property rights to unexecuted urban parks. The expectation effectiveness on urban park creation was insufficient and the environmental regulatory functions were weakened. Thus, historically, the private park system in Korea has experienced an 'institutional decoupling' as the purpose of the system and the results of actual outcomes are not consistent.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.9
• /
• pp.5-13
• /
• 2019

The soil-water characteristic curve (SWCC) plays an important role in determining the soil suction parameters required to predict the seepage or shear behaviors of unsaturated soils. In addition, path dependency of the SWCC affects the mechanical and hydrologic behaviors. In general, there is a disadvantage that it takes a long time to measure both the drying and wetting paths of the SWCC by a stepwise pressurization method. Thus, the continuous pressurization method as an improved testing method for the SWCC was suggested, and the testing time for two paths of the SWCC was significantly shorter than the conventional methods. For the applicability evaluation of this method, the results of the SWCC obtained by the stepwise pressurization method and the evaporation method in this study were compared to the result obtained from this method. As a result, it was found that the difference among three methods was negligible, and the testing time of the continuous pressurization method was greatly decreased. Therefore, it can be said that it is possible to quickly and accurately measure the SWCC under various conditions by the continuous pressurization method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.6
• /
• pp.1463-1479
• /
• 2013

In this paper, we propose an unequal protection physical coding sub-layer (PCS) forward error correction (FEC) scheme for efficient and high-quality transmission of video data over optical access networks. Through identifying and resolving the unequal importance of different video frames and passing this importance information from MAC-layer to PCS, FEC scheme of PCS can be adaptive to application-layer data. Meanwhile, we jointly consider the different channel situations of optical network unit (ONU) and improve the efficiency of FEC redundancy by channel adaptation. We develop a theoretical algorithm and a hardware method to achieve efficient FEC assignment for the proposed unequal protection scheme. The theoretical FEC assignment algorithm is to obtain the optimal FEC redundancy allocation vector that results in the optimum performance index, namely frame error rate, based on the identified differential importance and channel situations. The hardware method aims at providing a realistic technical path with negligible hardware cost increment compared with the traditional FEC scheme. From the simulation results, the proposed Channel and Application-layer data Adaptation Unequal Protection (CAAUP) FEC scheme along with the FEC ratio assignment algorithm and the hardware method illustrates the ability of efficient and high-quality transmission of video data against the random errors in the channel of optical access networks.

• Journal of the Korean School Mathematics Society
• /
• v.20 no.3
• /
• pp.325-344
• /
• 2017

Since PISA2006, the computer based assessment in mathematics(CBAM) was introduced for the first times and at last PISA2015 used all items in CBAM for problem solving. In this study, we focused on which important properties were considered in constructing geometric 'fence items' used in PISA 2015 to find the future direction over our teacher education, especially for constructing 'computer based assessment items.' For the purpose of the study, we analyzed the fence items on three components such as dependency, invariant, and path found in dragging activities, within a computer environment using the dynamic Geometry Software, GSP. Also, for the future, we provided an open-ended problem related to the fence items, which we could use as the merit of computer-based environment.