• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.11
• /
• pp.131-170
• /
• 1998

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.3
• /
• pp.319-324
• /
• 2018

The collision problem is one of the design factors that must be carefully considered for the risk of collision occurring during the operation of ships and offshore structures. This paper presents the main results of the ship collision study, and its main goal is to analyze potential crash scenarios that may occur in the FLNG (Floating Liquefied Natural Gas) considering the likelihood and outcome. Consideration being given to vessels visiting the FLNG and surrounding vessels navigating around, such as functionally supported vessels and offloading carriers. The scope includes vessels visiting the FLNG facility such as in-field support vessels and off-loading carriers, as well as third party passing vessels. In this study, based on QRA (quantitative risk assessment), basic research methods and information on collision are provided. Based on the assumptions and methodologies documented in this study, it has been possible to clarify the frequency of collision and the damage category according to the type of visiting ship. Based on these results, the risk assessment results related to the collision have been derived.

• International Journal of Highway Engineering
• /
• v.16 no.1
• /
• pp.99-109
• /
• 2014

PURPOSES : Climbing lanes on expressways managed by the Korea Expressway Corporation (KEC) have been hot potatoes due to conflicts between slow-moving vehicles such as trucks and other vehicles at the merging section as well as the less popularity with the slow-moving vehicles. In order to resolve such problems, KEC has altered existing climbing lanes to passing-type climbing lanes in 1999. The new type of climbing lanes showed an apparent improvement in mobility. For example, the speeds of vehicles using both climbing lane and other lanes improved a lot. However, there has been no clear evidence about improved safety. METHODS : This research effort was initiated to evaluate the safety of the new passing-type climbing lanes using the comparison-group(CG) method based on three-year-long traffic accident data sets before and after the change, respectively. RESULTS : The passing-type climbing lanes showed twice increased traffic accidents even though the traffic accidents on old type climbing lanes increased 1.1% during the same periods. In addition, in-depth study, the merging area of the passing-type climbing lanes was found out to be the weakest section where 43.8% traffic accidents out of total traffic accidents happened. It is noted that the merging area of the old type climbing showed only 25.0% traffic accidents. CONCLUSIONS : The new passing-type climbing lanes were found to be weak in terms of safety when compared with the old type climbing lanes. Especially, the merging area should be improved to reduce the risk of traffic conflicts between slow-moving vehicles and other vehicles.

• Progress in Medical Physics
• /
• v.31 no.4
• /
• pp.153-162
• /
• 2020

Purpose: We aim to evaluate the accuracy and effectiveness of an automatically converted radiation therapy plan between Radixact machines by comparing the original plan with the transferred plan. Methods: The study involved a total of 20 patients for each randomly selected treatment site who received radiation treatment with Radixact. We set up the cheese phantom (Gammex RMI, Middleton, WI, USA) with an Exradin A1SL ion chamber (Standard Imaging, Madison, WI, USA) and GAFCHROMIC EBT3 film (International Specialty Products, Wayne, NJ, USA) inserted. We used three methods to evaluate an automatically converted radiation therapy plan using the features of the Plan transfer. First, we evaluated and compared Planning target volume (PTV) coverage (homogeneity index, HI; conformity index, CI) and organs at risk (OAR) dose statistics. Second, we compared the absolute dose using an ion chamber. Lastly, we analyzed gamma passing rates using film. Results: Our results showed that the difference in PTV coverage was 1.72% in HI and 0.17% in CI, and majority of the difference in OAR was within 1% across all sites. The difference (%) in absolute dose values was averaging 0.74%. In addition, the gamma passing rate was 99.64% for 3%/3 mm and 97.08% for 2%/2 mm. Conclusions: The Plan transfer function can be reliably used in appropriate situations.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.917-930
• /
• 2018

A quantitative risk assessment method for quantitatively evaluating the fire risk in designing a road tunnel disaster prevention facilities has been introduced to evaluate the appropriateness of a disaster prevention facility in a large tunnel through which all vehicle types pass. However, since the quantitative risk assessment method of the developed can be applied only to the large sectional area tunnels (large tunnels), it is necessary to develop a quantitative risk assessment method for road tunnels passing only small cars which has recently been constructed or planned. In this study, fire accidents scenarios and quantitative risk assesment method for small road tunnels through small cars only which is based on the methods for existing road tunnels (large tunnels). And the risk according to the distance between cross passage is evaluated. As a result, in order to satisfy the societal risk assessment criteria, the distance of the appropriate distance between cross passages was estimated to be 200 m, and the effect of the ventilation system of the large port exhaust ventilation system was quantitatively analyzed by comparing the longitudinal ventilation system.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.58
• /
• pp.59-98
• /
• 2013

Risk of loss is a term used in the law of contracts to determine which party should bear the burden of risk for damage occurring to goods after the sale has been completed, but before delivery has occurred. Under the Uniform Commercial Code (UCC), there are four risk of loss rules, in order of application. First, it is agreement that is the agreement of the parties controls. Second, the breaching party is liable for any uninsured loss even though breach is unrelated to the problem. Hence, if the breach is the time of delivery, and the goods show up broken, then the breaching rule applies risk of loss on the seller. Third, the delivery by common carrier other than by seller is necessary: Risk of loss shifts from seller to buyer at the time that seller completes its delivery obligations; If it is a destination contract, then risk of loss is on the seller; If it is a delivery contract, then the risk of loss is on the buyer. Fourth, if the seller is a merchant, then the risk of loss shifts to the buyer upon buyer's receipt of the goods. If the buyer never takes possession, then the seller still has the risk of loss. This paper discusses problems of risk of loss under the American law. Specifically, this paper focuses on the interpretation of UCC sections and analysis of various cases. By comparing, also, UCC and Korean law, the paper proposes some implications of risk of loss issues for Korean law.

• Journal of Navigation and Port Research
• /
• v.38 no.4
• /
• pp.327-333
• /
• 2014

The Convention on the international regulations for preventing collisions at sea, 1972(COLREGs) defines the collision avoidance principles and various navigation rules for the prevention of collision at sea. In particular, the initial responses to avoid risk of collision are mainly decided by navigation officer's experience and subjective judgement. However, collision accidents could be effectively prevented if the minimum criteria of quantitative initial response are suggested to the junior officers and the cadets who have insufficient sea experience and navigation competency. This study reviewed the COLREGs terms related to the initial response and the existing papers concerned with risk assessment model. A questionnaire survey is also carried out for safe passing distance, degrees of alternating course and initial response distance to avoid collision in accordance with various encounter situations. Base on these results, we propose the proper minimum safe passing distance between the vessels, the initial response distance and required turning angles for alternation in each encounter situations. The suggested criteria of initial response will contribute to the prevention of collision at sea as well as the improvement of gradual navigation technology.

• Journal of the Korean Institute of Navigation
• /
• v.18 no.4
• /
• pp.33-47
• /
• 1994

On developing port system, the performance tests of system in relation to ship maneuver generally consists of the three parts: the channel transit, the manoeuvring in a turning basin and the docking/undocking. The quantifications of risk of an accident has priviously been difficult due to the low occurrence of accidents relative to the number of transits. Additionally, accident statistics could not be related port system because of the large number of factors contributing to the accident. such as human error, equipment failure, visibility, light, traffic. etc. In case of the channel transit, "Relative Risk Factor(RRF)" or "Relative Risk Factor for Meeting Traffic" was proposed as the as the measures derived to quantify the relative risk of accident by M.W.Smith. This factor measure the tracking performance, the turning performance and the passing performance at meeting traffic. On the other hand, the safety of berthing maneuver is not measured with a few evaluating factors as controlled due to complex controllabilites such as steering, engine, side thrusters or tugs. This work, therefore, aims to propose the evaluating measure by the Analytic Hierarchy Process(AHP). Six experimental scenarios were establised under the various environmental conditions as independent variables. In every simulation, the difficulty of maneuver was scored by captain and compared with AHP scores. The results show almost same and from which the weights of eight evaluating factors could be fixed. Additionally, the limit value of relative factor in berthing safety to six scenarios could be estimated to 0.11.e estimated to 0.11.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.7 no.3
• /
• pp.41-59
• /
• 2001

Recently, as the coastal trading is being increased rapidly, risk of collision being increased especially in the coastal route near around the port of Wando. In this paper, with the reference to various literatures and papers on collision avoidance rules, the navigational rules and regulations for the coastal area-especially for the narrow channel-are construed and introduced in brief. Also, 3 collision cases near around the port of Wando and statistical data during 5 years(1996 to 2000) are studied. The results of this study are as follows; 1. It is strongly recommended to separate the route of east-bound and west-bound in this area due to removing the risk of collision between the vessels in reciprocal way. 2. The owner of the fleet should lead that the master should con the vessel by himself when passing this area. 3. For the introduction of the Coastal VTS, it is required to investigate the capability to cooperate with military radar sites which based on all over the coast.

• Journal of Korean Foot and Ankle Society
• /
• v.19 no.4
• /
• pp.197-200
• /
• 2015

The Akin osteotomy is a complimentary procedure in hallux valgus surgery. Surgical techniques may vary depending on the operators or fixation devices. Suture fixation, for which a removal procedure is not necessary, can often be recommended. However, there is a risk of failure due to the thin cortex of the phalanx. We describe a new technique using Ethibond suture fixation in Akin osteotomy, which can lower the risk of phalangeal cortical failure and articular cartilage irritation. First, the Akin osteotomy was performed on the proximal phalanx 5 to 6 mm distal to the first metatarsophalangeal joint. Then bone holes were drilled from dorsum to plantar parallel to osteotomy with the Kirschner wire. The final procedure involved passing the Ethibond sutures connected to a straight needle through the holes and tying it. This fixation method offers an effective and easy technique for performance of Akin osteotomy.