• 자동차안전학회지
• /
• 제16권1호
• /
• pp.55-61
• /
• 2024

The advancement of autonomous driving technology is expected to transform cars beyond mere transportation into multifunctional spaces for relaxation and entertainment. As autonomous driving technology becomes more sophisticated, with no need for direct driver control, the interior space of vehicles is anticipated to be utilized for various purposes. Consequently, the importance of car seats, the component most frequently interacted with by passengers during travel, is expected to significantly rise. However, existing car seats are designed according to a seated posture, necessitating verification for passenger safety and seat structure considerations in the context of autonomous driving, where comfortable postures may differ. For these reasons, it is anticipated that the seats of future autonomous vehicles will evolve with the incorporation of additional safety and convenience features. In this study, a three-axis car simulator was employed to investigate seat angles for comfortable postures of passengers in autonomous driving scenarios. Representative postures were identified to enhance passenger convenience. Furthermore, functional design factors contributing to passenger comfort were applied to conduct seat design, seat structure, and collision analysis, with an analysis of the interrelationships among design factors.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.120-128
• /
• 1997

The variations of the temperature field in a passenger compartment were measured by using a HSI true color image processing system and TLC(Thermochromic Liquid Crystal) solution. This temperature measurement technique was proved to be useful for analyzing the ventilation flow. The flow field in the passenger compartment was visualized using a particle streak method with pulsed laser light sheet. The temperature field and flow field in the passenger copartment were affected significantly by the ventilation mode. The panel-vent mode heating had shorter elapse time to reach a uniform temperature than the foot-vent mode under the same ventilation condition and nonuniformity inside the passenger compartment could be minimized effectively by using the bilevel heating mode. The temperature increase rate in the rear passenger compartment was iower than the front compartment, especially in the vicinity of the rear seat occupants' knee level.

• 자동차안전학회지
• /
• 제5권1호
• /
• pp.31-36
• /
• 2013

For the robust passenger NCAP 5star and the stable neck injury performance, a new concept of passenger airbag has been required strongly. Especially, the deployment stability and the vent hole control technology of the passenger airbag should be improved. According to these requirements, the deployment stability technique has been studied and the 'Active Vent' technology has been developed. As a result, these technologies have led to achieve the robust NCAP rating and are applied to the production vehicles.

• 한국정밀공학회지
• /
• 제23권12호
• /
• pp.88-94
• /
• 2006

In this study, the dynamic impact analysis for the passenger air-bag(PAB) module has been carried out by using FEM to predict the dynamic characteristics of vehicle ride safety against head impact. The impact performance of vehicle air-bag is directly related to the design parameters of passenger air-bag module assembly, such as the tie bar bracket's width and thickness, respectively, However, the product's design of PAB module parameters are estimated through experimental trial and error according to the designer's experience, generally. Therefore, the dynamic analysis of head impact test of the passenger air-bag module assembly of automobile is needed to construct the analytical methodology At first, the FE models, which are consist of instrument panel, PAB Module, and head part, are combined to the whole module system. Then, impact analysis is carried out by the explicit solution procedure with assembled FE model. And the dynamic characteristics of the head impact are observed to prove the effectiveness of the proposed method by comparing with the experimental results. The better optimized impact performance characteristics is proposed by changing the tie bracket's width md thickness of module. The proposed approach of impact analysis will provides an efficient vehicle to improve the design quality and reduce the design period and cost. The results reported herein will provide a better understanding of the vehicle dynamic characteristics against head impact.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.83-94
• /
• 1999

This study is about design of vehicle for air tightness to pressure waves of high speed train. When the train runs to high speed over 300km/h, the comfort of passenger come down due to difference pressure between inside and outside of passenger room. The car-body was carried out the design of air-tightness, and the analysis of inside pressure of vehicle in tunnel by TG_TUN of ALSTOM Co. The result of analysis should be used the design of air pressurized system and car-body of G7 high speed train project.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.282-285
• /
• 2003

Two criteria of good vehicle suspension performance are typically their ability to provide good road handling and increased passenger comfort. So far, The existing active vehicle suspension uses pneumatic and hydraulic actuators that enhance road handling and passenger comfort. But these kinds of actuators have nonlinear characteristic less than an electromagnetic motor. In this research, we are trying to examine the feasibility and the experiment of an active vehicle suspension using electromagnetic motor in order to enhance the ride quality because existing active vehicle suspension using active power sources such as compressors, hydraulic pumps has nonlinear characteristic. Active vehicle suspension using electromagnetic motor will have the ability to behave differently on smooth and rough roads. The desired response should be soft in order to enhance ride comfort, but when the road surface is too rough the suspension should stiffen up to avoid hitting its limits.

• 대한교통학회지
• /
• 제14권3호
• /
• pp.61-73
• /
• 1996

The objective of this paper is to estimate the PCE(Passenger Car Equivalents) of various vehicle types on expressway work zones. Headway samples of 5,359 vehicles were collected in 6 work zones in the Kyungbu Expressway between September and November of 1995. Average headways of 8 vehicle types based on the vehicle classification method of the Department of Construction and Transportation were calculated. A statistical test of effects of the types of the preceding vehicles were performed for the average headways between a vehicle type preceded by other vehicle types. The results show that the effects of the type of preceding vehicles are significant (exceeded 5% and 10% significance levels) and the PCEs of heavy vehicles on expressway work zones are higher than that of basic expressway section. Therefore, different adjustment factors should be applied for heavy vehicles in estimating saturation flow rates of expressway work zones. The study also derives an equation to determine PCEs of these vehicle types.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1235-1242
• /
• 2009

The Emergency Exit System is evacuation equipment that operated by crew or passenger when emergency state such as fire, accident, etc in the rolling stock. Generally front emergency exit is installed in the drivers area and it is isolated to passenger area, so its design is little big easy. But front emergency exit that is installed in driverless vehicle have to consider not only anti-vandalism and failure but also its design because it is installed in the passenger area. Therefore, we survey the characteristic, function and needed condition the emergency front exit of driverless vehicle and present the developing system that can be a help to make design.

• 한국ITS학회 논문지
• /
• 제13권4호
• /
• pp.48-56
• /
• 2014

유류소모량 산정 모형 개발을 위해서는 차종, 도로의 경사, 포장상태, 포장종류 등 다양한 변수들을 고려해야 하지만 현재 사용하고 있는 국토교통부의 투자평가지침에도 차종으로만 구분이 되어 있을 뿐 다양한 요인들을 고려하지 못하고 있는 실정이다. 본 연구에서는 도로의 경사도가 승용차의 유류소모량에 미치는 영향을 분석하기 위해 실제 주행실험을 통해 얻은 데이터를 기반으로 유류소모량 산정 모형을 개발하고 적용성을 검증하는 것을 목적으로 한다. 경사도에 따른 유류소모량 모형 개발을 위해 GPS 장비와 연비측정장비를 이용하여 실제 주행실험을 통해 유류소모량을 초(sec)단위로 측정하였다. 평지(${\pm}0{\sim}2%$), 오르막(+2~5%), 내리막(-2~5%)의 세 가지 경사도로 구분하였으며 차량의 속도와 유류소모량을 변수로 하는 회귀모형을 이용하여 모형을 개발하였다. 승용차의 유류소모량은 내리막, 평지, 오르막 순으로 커지는 것을 확인할 수 있었다.

• 한국소음진동공학회논문집
• /
• 제26권2호
• /
• pp.210-216
• /
• 2016

In this work, performance analysis to improve ride comfort of an ER (electrorheological) fluid damper for a mid-sized passenger vehicle in terms of tire pressure is presented. An ER damper by considering specification for a mid-sized commercial passenger vehicle is proposed and mechanically designed. After manufacturing and assembling the proposed ER damper with design parameters, their performance such as field-dependent damping forces are experimentally measured. A quarter-vehicle ER ECS (Electronic Control Suspension) system consisting of the ER damper, sprung mass, spring, sky-hook controller and tire is constructed to analysis the ride comfort performances. Vertical tire stiffness with different tire pressure is experimentally measured and investigated. In addition, ride comfort analysis such as vertical acceleration root mean square (RMS) of sprung mass is investigated under bump road using quarter-vehicle test equipment.