• The Journal of Sustainable Design and Educational Environment Research
• /
• v.17 no.3
• /
• pp.26-34
• /
• 2018

This research is a pre-research to find out profit module of 20 students in a classroom. I researched the widths of passages in the 30 classrooms of 5 elementary schools in Nothern Kyeonggi-do. I found the conclusions as follows. 1st, the area of 1 student's unit is $650(W){\times}950(D)$ 2nd, most of classrooms' students table placements are one-way types(77%). U-types are 13%. group study-types are 7% 3rd, The width between blackboard and front student's table is 2.08m. The width of passage between back seat and backboard is 1.12m. The width of passage between side wall and near student's table is 0.89m. The width of passage between window and near student's table is 0.74m. The width of vertical passage(A) between student's tables is 0.68m. The width of vertical passage(B) between student's tables is 0.7m. 4th, The area of teachers' is $2.1m{\sim}2.25m{\times}2.1m=4.41{\sim}4.73m^2$

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.19 no.4
• /
• pp.60-69
• /
• 2020

This research is a preliminary study to find out the module of 20 students in a classroom. This research investigated the widths of passages in the 30 classrooms of 5 elementary schools in Namyangju City, Korea. The conclusions were as follows: First, the area of unit for 1 student was 650 (W) × 950 (D). Second, the desk placements for most classrooms were one-way types (87%), and group-study types constituted 13%. Third, the width between the blackboard and the very front desk was 2.17 m. The width of passage between the very back seat and the backside lockers was 1.32 m. The width of passage between the sidewall and the nearby desk was 0.8 m. The width of passage between the window and the nearby desk was 0.8 m. The average widths of 2 vertical passages between the desks were respectively 0.67 m and 0.68 m. Fourth, the area of the teacher was 2.1-2.25 m × 2.16 m = 4.5-4.8 ㎡.

• Journal of Environmental Science International
• /
• v.30 no.6
• /
• pp.475-485
• /
• 2021

This research investigated the characteristics of fine particles during cold front passage in Busan, on March 19, 2020. The cold front speed was 17.4 m/s (about 63k km/hr), moving from the northwest to the southeast, and with a width of about 64 km. The backward trajectory analysis showed that a southern sea air parcel flowed into Busan before the cold front passage, carrying continental materials from China transported into Busan after cold front passage. The PM₁₀ concentration in Busan showed a rapid increase after passing through the cold front, with PM_2.5 showing a high concentration during cold front passage. The PM_2.5/PM₁₀ ratio was 0.10 - 0.30. When the cold front passed, SO₄^2-, NO₃^-, Ca²⁺, NH₄⁺, Na⁺, and K⁺ in PM_2.5 showed a rapid increase, with SO₄^2- showing the most significant increase. These results indicated that understanding the characteristics of fine particles during cold front passage in Busan could provide insight into establishing a strategy to control urban air quality.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.4
• /
• pp.309-316
• /
• 2020

Waterway design should prioritize appropriate channel width to ensure preferential safe passage for the arrival and departure of vessels. To calculate the minimum channel width required for safe passage a comprehensive review of several factors is required. These factors include vessel maneuverability, determined by vessel size, type and speed; environmental factors such as wind, tide, and wave action; human factors, including personal experience and operator judgment as well as marine traffic and navigation support facilities for decision making. However, the Korean channel width design standard is based only on vessel length, and requires improvement when compared with the standards of PIANC, USA, and Japan. This study aims to estimate the appropriate channel width required for one-way traffic in a straight channel, considering various vessel and environmental factors, using Fast Time Simulation (FTS). When the wind speed is 25 knots, with a current speed of 2 knots and a normal vessel speed of 10 knots FTS shows that a 150K GT Cruise Ship requires a minimum channel width of 0.67-0.91 the vessel length (L), whereas a 120K TEU Container Ship and a 300K DWT VLCC require 0.79-1.17 and 1.02-1.59, respectively. Such results can be used to calculate the minimum channel width required for safe passage as an improved Korean design standard.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.423-428
• /
• 1999

A high precision hot strip width control method has been developed in this study by applying interstand looper tension measuring system at finishing mill stands. As with deviation of hot rolled steel strip is closely related to abnormal increase in the interstand strip tension, on-line measuring device of looped tension and data analyzing system was developed in this study. To determine dominant factors that will cause local width shortage, the logged data sets of bar width, bar thickness, looper tension, and strip thickness along the strip length were correlated with the data set of strip width change. With the result of the correlation analysis, existing sequence control logic and parameters for looper actuator were modified for strip width quality and the gains of the looper control were refined for the stable operation during the full passage of rolled strip. The on-line tension measurement and tension feedback control for looper system improved strip travelling stability and reduced strip width deviation in the srip top end region.

• Korean Institute of Interior Design Journal
• /
• v.21 no.5
• /
• pp.23-33
• /
• 2012

This study evaluated two educational spaces, one middle school and one high school in point of universal design. The survey method with an observation and measuring method was used. The subject were 238 students of a middle and a high school. They evaluated their schools according to 53 universal design related items which consisted of 5 principles. Findings were as follows ; 1) The width of passage between desk and desk was very narrow and there is the threshold at the door of classroom. The students evaluated them negatively, too. Also, they indicated that the size of individual locker was small and the corner of furniture was sharp. 2) The width of door and passage was narrow and the floor was not flat in restroom. The design quality such as color and finishes was not good. Also, the students evaluated all these items negatively. 3) The dining space was too big. That is, so many students takes meals in one big space. The dining tables were arranged in a long rows and the width between them was also so narrow to pass through. 4) The student of high school evaluated their educational environments more negatively than ones of middle high school. This means that the high school students were more dissatisfied with their school environment. The educational environment should be designed on the base of their students' needs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.727-736
• /
• 2021

Road tunnel lengths are increasing. Some 1,300 tunnels with 1,102 km in length had been increased till 2019 from 2010. There are 64 tunnels over 3,000 m in length, with their total length adding up to 276.7 km. Safety facilities in the event of a tunnel fire are critical so as to prevent large-scale casualties. Standards for installing disaster prevention facilities are being proposed based on the guidelines of the Ministry of Land, Infrastructure and Transport, but they may be limited to deep underground tunnels. This study was undertaken to provide guidelines for the spacing of evacuation connection passages and the widths of evacuation connection doors. Evacuation with various spacing and widths was simulated in regards to evacuation time, which is the measure of safety, using the evacuation analysis simulation software EXODUS Ver.6.3 and the fire/smoke analysis software SMARTFIRE Ver.4.1. Evacuation connection gates with widths of 0.9 m and 1.2 m, and spacings of 150 m to 250 m, were set to every 20 m. In addition, longitudinal slopes of 6 % and 0 % were considered. It was determined to be safe when the evacuation completion time was shorter than the delay diffusion time. According to the simulation results, all occupants could complete evacuation before smoke spread regardless of the width of the evacuation connection door when the longitudinal slope was 6 % and the interval of evacuation connection passage was 150 m. When the evacuation connection passage spacing was 200 m and the evacuation connection gate width was 1.2 m, all occupants could evacuate when the longitudinal slope was 0 %. Due to difference in evacuation speed according to the longitudinal slope, the evacuation time with a 6 % slope was 114 seconds shorter (with the 190 m connection passage) than with a 0 % slope. A shorter spacing of evacuation connection passages may reduce the evacuation time, but this is difficult to implement in practice because of economic and structural limitations. If the width of the evacuation junction is 1.2 m, occupants could evacuate faster than with a 0.9 m width. When the width of a connection door is 1.2 m with appropriate connection passage spacing, it might provide a means to increase economic efficiency and resolve structural limitations while securing evacuation safety.

• The KSFM Journal of Fluid Machinery
• /
• v.11 no.4
• /
• pp.45-51
• /
• 2008

The purpose of this study is to examine the effect of nozzle shape on the performance and internal flow of a cross-flow hydro turbine. CFD analysis for three kinds of nozzle shape is conducted to simulate the effect of nozzle shape. The results reveal that relatively narrow nozzle width is effective to increase the turbine efficiency and output power. Almost output power is achieved at Stage 1. Therefore, optimum design of the nozzle shape is necessary to improve the turbine performance. Recirculation flow in the runner passage decreases the turbine efficiency and output power because the flow make hydraulic loss and collision loss in the region. Air should be put into the runner passage and the recirculating flow should be suppressed by the air layer in the runner.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.22-23
• /
• 2017

This research aimed to analyze the fundamental properties of cement mortar accompanying the change of solid contents of PC type water reducing agent. As a result of the experiment, in the case of flow to the properties of the fresh mortar, it shows a tendency to decrease as the solid content ratio decreases, and the decrease width with the passage of time is greatly reduced when 30 minutes passed since the passage of 60minutes It turned out that it was. In the case of the air contents and the compressive strength, it was found that there is almost no difference due to the change in the solid contents.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.775-782
• /
• 2021

The Myodo-Strait at Yeosu Port is normally used as a major vessel passage for dangerous cargo carriers that carry regular products of dangerous goods. Currently, the Myodo-Strait allows only single passage, and the speed of passage is also limited to 8 knots. As a result, demurrage at the wharf of hazardous goods are also on the rise. It is expected that the development of a number of dangerous commodity wharf in the future will increase the volume of vessel traffic and increase the number of vessels used in the project area. Therefore, it is urgent to improve the waterway in order to secure the safety of ships using the waterway and improve the demurrage. This study proposed an improvement plan for the waterway through the analysis of the marine environment of the waterway and the process of collecting opinions from users in the sea area. and it was finally proposed to expend the width of the strait to 300m and secure a depth of 9.50m through Guidelines of Port and Harbor Design review and ship handling simulation evaluation. In addition it was evaluated that the vessel traffic congestions at peak-time in the situation of solo passage was greatly improved from 71.01% to 47.3% even when it was allowed to ship's crossing passage, as a result of vessel traffic congestions evaluation. According to the proposed improvement plan, the safety of ships' passage in the project area can be secured, and the issue of demurrage was also considered to be improved.